IMPROVEMENT TO BALIPADA to RUPRA ROAD FROM 0/000 KM TO 7/754 KM IN THE DISTRICT OF KALAHANDI UNDER STATE PLAN FOR THE YEAR 2025-26

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used.

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical means.

Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface.

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler....

Construction of moorum shoulder with approved quarry with all Lead & Lift etc Complete

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35.

Providing and errecting direction and place identification retro reflective sign as per IRC 67 made of high intensity grade sheeting as per clause no 801.3 fixed over aluminium sheeting, 2m thick with area exceeding 0.9sqm supported on a mild steel angle Iron post 75x75x6mm , 2nos firmly fixed to the ground by means of properly designed foundation with M15 grade of concrete 45x45x60cm below ground level as per approved drawing. 90 cm Equilateral traingle

90 cm high octagon

60 cm x 50 cm Rectangular

90cm x 30 cm Rectangular

Providing Reflected RPM(Road Stud)100x100mm size, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surfaceby drilling hole 30mm upto a depth of 60mm and bedded in a suitable bituminious grout or epoxy mortar, all as per BS 873 part 4:1973.