Construction of PERCULATION WELL IN Sukker Khad for improvement of water supply to village Batlahu and adjoining area in Tehsil Barsar Distt. Hamirpur HP

Amount

Earth work in foundation for digging well in dry excavation from gravel level upto the level where well curb is placed, including disposing of soil within all radius and filling space outside the well after completion from N.S. level to 1.5 meters depth in all kind of soil such as pick work,jumper work, blasting work Soft/hard rock chiseling workSoft/hard Rock(where blasting is prohibited) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Wet well sinking in gravel including all pumping, shoring etc.complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

From spring level to 3.00 meters below S.L. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Exceeding 3 meters, but upto 6.00 meters below S.L complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Exceeding 6 meters, but upto 9.00 meters below S.L complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Exceeding 9 meters, but upto 10.00 meters below S.L complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint. In beams joists channels, angles, tee, flats with connection plates or angle cleets as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Lowering steel well curb in the pit and assembling in position in all depth complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete work 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:

Suspended floors, roofs, landings and shelves and their supports, balconies,beams, girders, bressumers and cantilevers upto all floor level complete involving acomplete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Columns, pillars, posts and struts upto floor two level complete involving acomplete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying no fine concrete 1:4 (1 Cement:4 stone) aggregate 20mm nominal size) and curing complete in foundation and plinth excluding the cost of form work complete involving all leads and lifts to the entire satisfaction of Engineer-in-charge.

Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.

Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-charge.

Beams Cantilivers Girders Lintel upto any Depth complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing,laying tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level Tor steel complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Square rubble masonary coursed with hard stone of approved quality in in cement mortar 1:4( 1cement:4 sand ) in all leads and lifts.:-

Foundation footing and base of column and the like and mass concrete.

Above NSL ground level

20mm thick cement plaster in single coat on rough side of stone /brick masonry walls for interior plastering upto floor two level including arrises, internal rounded angles, in all girth chamfers and / or rounded angles and finished even and smooth in cement mortar 1:4 (1cement:4sand) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1cement:4sand:8 graded stone aggregate 20mm nominal size and curing complete excluding the cost of form work in foundation and plinth complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Brick work using common burnt clay building brick in foundation and plinth in cement mortar 1:3(1cement:3sand) 2nd class brick complete all leads and lifts to the entire satisfaction of Engineer-in-charge.

Providing and fixng CI cover with frame for manhole of 500mm internal dia cover ( medium duty) the weight of covers frame notless than 116 kg. in all leads and lifts.

Providing 200mm wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes with 200mmx200mmx100mm cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Boulder/stone filling dry hand packed tightly compelete under lean concrete to prevent the entry ofsurface water fi in allleads and lifts complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

manglesh thakur

Kanika

Dinesh Kumar Sharma

VINAY KUMAR GOVT CONT

BBN Enterprises

Devender Kumar

ASHISH KUMAR