KMC/LTG/237/WD25/IV/ZII/25-26

Outdoor Lighting Installation, Steel Tubular Pole, M.S. Pipe, G.I. Pipe, Pole CAP etc Supplying of Swaged Steel Tubular pole as per IS 2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)h) 410 SP - 24 ; 8.5 Mtr., 158.00 Kg.

SCHEDULE OF RATES FOR OH LINE INSTALLATION (LT DISTRIBUTION).Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto 9.0 mtr. Size 0.6x0.6x1.70 mts

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.

Outdoor Lighting Installation, Steel Tubular Pole/ M.S Pipe/ G.I. Pipe, Pole CAP etc. Supplying & Fixing of G.I pole cap for suitable size

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.ii2nd coat of aluminium paint over 1st coat

Erection of Galv. (HOT Dip) Cross arms/ `D... Iron Clamp7).Supplying & Erection of Galv. `D... iron complete with suitable pole clamp 75mmx88mm porcelain shackle insulator & 15 mm dia Galv. bolts & nuts. incl. painting

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 145. Galv. Straining screw 12"x5/8" dia

Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab).10sqmm x 4core

Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing

SUPPLYING & DELIVERY OF SINTEX 2 FRP WHITE WATERPROOF TYPE LOOPING CABLE BOX SIZE 300X200X110 MM DEEP, 4 MM THICK , HAVING INSULATION RESISTANCE GREATER THAN 200 MEGA OHM, IP66; COMPRISING OF ONE NO SPMCB, 4 NOS. TERMINAL CONNECTOR HAVING VOLTAGE GRADE OF 1.1 KV, ONE COMPRESSION TYPE BRASS CABLE GLAND FOR UPTO 4 CORE 16 SQMM PVC/A CABLE AS PER RATE OBTAINED FROM GEM PORTAL.

Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) on flat iron frame on wall 415V TP/TPN

BUILDING WORKS(M) DRAIN, DOWN PIPES, CHIMNEY ETC?.(C). ADDITIONAL RATE?(21)Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes: (iii) 160 mm. Dia.

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc. (Payment to be made on area of cut surface)

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (a) Tack weld

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 139. Galv. [Hot Dip] MS Flat

SUPPLY AND INSTALLATION OF POLYVINYLIDENCE FLUORIDE COATED ALUMINIUM COMPOSITE PANEL BOARD (3MM) OF ALUDECOR/ALSTONE SIZE (AS PER DRAWING) TO BE MADE SUCH A MANNER THAT IT CAN BE OPENED TOWARDS UP DIRECTION FOR TAKING MAINTENANCE (USOR (M&E) , 2022 OF IRIGATION & WATER DEPT. , GOVT. OF WB (PAGE-127 , ITEM 5.3L.1)

S & F ACRYLIC LETTER SCRIPTED IN ENGLISH/BENGALI SIZE AND MATTER OF LETTER AS PER APPROVED DRAWING BY EIC, FRONT SIDE OF THE LETTER TO BE MADE 6MM THICK IMPORTED (WHITE 0.40 UV STABILIZED EXCELLENT TO SELF DISPLAY. MAKE-ACAST, MITSUBISHI, ALL LETTER WILL BE RAISED MINIMUM 2? TO BE FIXED BY SPECIAL TYPE OF SOLUTION. (TOTAL SQ. METER OFEACH LETTER IS TO BE MEASUSED BASED ON ITS FRONT SURFACE AREA) (USOR (M&E) , 2022 OF IRIGATION & WATER DEPT. , GOVT. OF WB ) (PAGE-127 , ITEM 5.3L.2)

S& F LED LAMP INCL . BEST QUALITY LED LIGHTING ARRANGEMENT TO BE FIXED BY PROPER ARRANGEMENT WITH COMPLETE CONNECTION (1 MODULE CONTAIN 3 NOS LED , 0.5 EACH (USOR (M&E) , 2022 OF IRIGATION & WATER DEPT. , GOVT. OF WB )(PAGE-127 , ITEM 5.3L.3)

S& F WATER PROOF POWER SUPPLY SYSTEM IP 65, OUT VOLTAGE :12V/24V DC, 50/60 HZ FREQUENCY, 108 TO 305 VAC POWER SUPPLY> 0.95 POWER FACTOR FOR LED LAMP ( MAKE : MEAN WELL) 100 WATT, MODEL ELG 100 (USOR (M&E) , 2022 OF IRIGATION & WATER DEPT. , GOVT. OF WB )(PAGE-127 , ITEM 5.3L.4.2)

26 GAUGE GALVANIZES IRON SHEET FOR BACK PANEL WITH ONE COATING OF WHITE PAINT , MAKE- AARTI/ BANSAL/JINDAL) (USOR (M&E) , 2022 OF IRIGATION & WATER DEPT. , GOVT. OF WB )(PAGE-127 , ITEM 5.3L.5)

Sub Total

Please Enable Macros to View BoQ information