REPAIRS AND POLISHING OF BED PLYWOOD TOP, SIDE BOARD, TABLE DINNING, PEG TABLE, SOFA SET, TEAPOY AND OTHER WOODEN FURNITURE AT MD ACCN AND BSO (SOUTH) YARD UNDER GE(SOUTH) BANGALORE

Amount

Bed plywood top with MNF set (Application to item No 01 to 06) FD-246 Removing the existing unserviceable broken wooden long rail and supply of first class hard wood (Teak wood) new long rail of size 35mmx90mmx1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles as shown on drg and as directed.

Removing the existing unserviceable broken wooden head board including legs and supply and fix 900x660mm new head board including teak wood legs of size 60mmx60mm and all as specified and as shown on drgs.

Removing the existing unserviceable /broken foot board including legs and supply and fix 900x500mm new foot board including teak wood legs of size 60mmx60mm and all as specified/directed and as shown on drg.

Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix first class hard wooden stiffeners of size 40cmx60cm complete all as specified/directed and as shown on drg.

Removing the existing unserviceable plywood and supply and fix 900mmx1800mm x 12mm thick plywood commercial BWR grade bearing ISI marked all as specified/directed and as shown on drg.

Supply and fix 100mmx100mmx25mm thick teakwood corner bracket and screwed to the leg of bed plywood top all as specified/directed.

Side board (Applicable to item Nos 07 to 16) FD-241 Removing the existing unserviceable top and supply and fix new top made out of 18mm thick prelaminated MDF Baord, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 1220mmx455mm etc complete all as specified/directed and as shown on drg.

Removing the existing unserviceable side and supply and fix new side made out of 18mm thick prelaminated MDF Baord, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 760mmx455mm etc complete all as specified/directed and as shown on drg. Note:-Each side shall be measured as single units.

Removing the existing unserviceable back of side board and supply and fix new back with 6mm thick plywood, grade BWR, type BB, ISI marked of sizes 1220mmx700mm all as specified/directed and as shown on drg.

Removing the existing unserviceable bottom of drawer and supply and fix new 12mm thick plywood, grade BWR, type BB, ISI marked of size 380mmx450mm all as specified/directed and as shown on drg.

Removing the existing unserviceable drawer and supply and fix new drawer of size 380mmx450mmx155mm, made out of plywood 12 mm thick for sides and back and 18mm thick prelaminated MDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom as specified/directed and as shown on drg. Note:-Each drawer will be measured as single unit.

Removing the existing unserviceable shutter and supply and fix new shutter of size 600mmx390mm made out of 18mm thick prelaminated Particle Board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including hinges, and lock all as specified/directed and as shown on drg. Note:- Each shutter will be measured as single unit.

Removing the existing unserviceable bottom of side board and supply and fix new bottom of sizes 455mmx1228mm, made out of 18mm thick plywood, grade BWR, type BB all as specified/directed and as shown on drg.

Removing the existing unserviceable leg frame and supply and fix new teak wood leg frame with legs, sizes 1140mmx 380mm, etc complete all as specified/directed and as shown on drg.

Removing the existing unserviceable broken wooden legs and supply and fix new teak wood leg, size 45mmx45mmx125mm etc complete all as specified/directed and as shown on drg. Note:- Each leg will be measured as single unit.

Supply and fixing of knob and shall be aluminum anoidised (Dark Brown or Brass Cromium Plated )

Table dining 6 persons1500mm x 900mm (Applicable to item Nos 17 to 21) FD-273 FD-239 FD/MAP-II/03 Removing the existing unserviceable damaged top and supply and fix with a new prelaminated MDF board 18mm thick BW typewith 1.5mm thick decorative with with 4mm thick teak wood edging all round of size 1500mmx900mm all as specified/directed and as shown on drg.

Removing the existing unserviceable damaged long rails & supply and fix new teak wood long rail of size 25mmx100mmx1500mm all as specified/directed and as shown on drg

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 75mmx40mmx760mm all as specified/directed and as shown on drg .

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm all as specified/directed and as shown on drg.

Removing the existing unserviceable 4 corner wooden bracket size 25mmx100mmx100mm and supply and fix 4 corner wooden bracket size 25mmx100mmx100mm all as specified/directed and as shown on drg

Table dining 8 persons 1800mm x 900mm (Applicable Nos 22 to 26) FD-273 FD-239, FD/MAP-II/03 Removing the existing unserviceable damaged top and supply and fix new top with a new prelaminated MDF board 18mm thick BW typewith 1.5mm thick decorative with with 4mm thick teak wood edging all round of size 1800mmx900mm all as specified/directed and as shown on drg..

Removing the existing unserviceable damaged long rail & supply and fix new long rail made of teak wood size 25mmx100mmx1800mm and all as specified/directed and as shown on drg..

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg all as specified and as shown on drg of size 75mmx40mmx760mm.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm all as specified and as shown on drg .

Removing the existing unserviceable damaged Bracket and Supply and fixing of 4 corner wooden bracket size 25mmx100mmx1000mm. (Set of 04)

Table peg (Applicable to item Nos 27 to 30) FD-384 FD-25 FD-236 Removing the existing unserviceable top and supply and fix new top of size 450x300 mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with with 4mm thick teak wood edging all round to the top of Peg table all as specified and as shown on drg.

Removing the existing unserviceable bottom rail and supply and fix new teak wood bottom rail of size 20mmx40mmx300mm all as specified and as shown on drg.

Removing the existing unserviceable long rail and supply and fix new teak wood long rail of size 20mmx 40mmx450mm and 4 corner wooden bracket size 20mmx40mmx40mm all as specified and as shown on drg.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30x50x380 mm all as specified and as shown on drg.

Table centre (Applicable to item Nos 31 to 35) FD-29 FD-274 FD-235 Removing the existing unserviceable top and supply and fix new top of size 900mm x 450mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with with 4mm thick teak wood edging all round of table top all as specified and as shown on drg.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30mmx60mmx400mm all as specified and as shown on drg.

Removing the existing unserviceable long rail of size 30mmx60mmx900mm and supply and fix new teak wood long rail and all as specified and as shown on drg.

Removing the existing unserviceable short rail of size 30mmx60mmx450mm and supply and fix new teak wood short rail all as specified and as shown on drg.

Supply and fixing of 4 corner wooden bracket size 20mmx40mmx40mm. (Set of 04)

Teapoy (Applicable to item Nos 36 to 39) FD-34 FD-278 FD-232 FD-382 Removing the existing unserviceable top and supply and fix new top of size 600mmx450mm made out of 18mm thick pre-laminated MDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 4mm thick teak wood edging al-round the top of teapoy all as specified and as shown on drg.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 515mmx45mmx45mm all as specified and as shown on drg.

Removing the existing unserviceable long rail and supply and fix new teak wood of size 450mmx50mmx20mm and 4 corner wooden bracket size 20mmx40mmx40mmall as specified and as shown on drgs.

Removing the existing unserviceable side rail and supply and fix new teak wood side rail of size 390mmx50mmx20mm all as specified and as shown on drgs.

Sofa sets (Applicable to item Nos 40 to 48) FD-281 Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth as per sample with foam cushion of size 560mmx530mm, 40 density, 100mm thick, including inner cloth all as shown on drgs and as directed. Note :- Each cushion for seat or back will be measured as single unit.

Removing the existing unserviceable leg from Sofa and supply and fix new teak wood leg of size 35mmx75mmx510mm all as shown on drg and as directed.

Removing the existing unserviceable arm rest from sofa and supply and fix new teak wooden arm rest size 70mmx35mmx725mm all as shown on drawing and as directed .

Removing the existing unserviceable side rail from sofa and supply and fix new teak wood side rail of size 35mmx100mmx690mm all as shown on drawing and as directed .

Removing the existing unserviceable bearer from sofa long pieces and supply and fix new teak wood bearer of size 1590mmx50mmx22mm all as shown on drawing and as directed .

Removing the existing unserviceable bearer from sofa short pieces and supply and fix new teak wood bearer of size 440mmx50mmx22mm all as shown on drawing and as directed .

Removing the existing unserviceable battens from sofa and supply and fix new teak wood battens of size 570mmx50mmx22mm all as shown on drawing and as directed .

Removing the existing unserviceable front rail from sofa long pieces and supply and fix new teak wood front rail all as shown on drawing and as directed .

Removing the existing unserviceable front rail from sofa short pieces and supply and fix new teak wood front rail of size 22mmx102mmx1740mm all as shown on drawing and as directed .

Sofa set (Applicable to item Nos 49 to 56) FD-258 Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth with foam cushion 40 density, 50 mm thick all as shown on drgs and as directed. Note:- Each cushion for seat or back will be measured as single unit. Tapestry cloth to be provided as per sample.

Removing unserviceable plywood 12 mm from seat of sofa set and fix new plywood 12 mm ISI marked BWR grade of size 670mm x 690mm for chairs and as specified in drg

Removing unserviceable Plywood 12 mm from seat of sofa set and fix new plywood 12 mm ISI marked BWR grade of size 1740mmx 690mm for chairs and as specified in drg

Removing the existing unserviceable front leg from Sofa and supply and fix new teak wood leg of size 30mm x 75mm x 510mm all as shown on drg and as directed.

Removing the existing unserviceable back leg from Sofa and supply and fix new teak wood leg of size 30mm x 75mm x 760mm all as shown on drg and as directed.

Removing the existing unserviceable wooden front bearer from Sofa and supply and fix new teak wood front bearer of size 20mm x 50mm x 1740mm all as shown on drg and as directed

Removing the existing unserviceable side rail from Sofa and supply and fix new teak wood side rail of size 30mm x 102mm x 690mm all as shown on drg and as directed.

Removing the existing unserviceable back support rail from sofa and supply and fix new teak wood back support rail of size 20mm x 102mm x 1740mm all as shown on drg and as directed.

Sofa set (TP) Removing the existing unserviceable fabric, cushion and replacing with new leatherette with foam cushion 40 density, 50 mm thick all as shown on drgs and as directed. Note:- 05 Seater Sofa for seat or back will be measured as single unit. leatherette to be provided as per sample.

Book case FD-237 Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrassive cloth throughly smooth and clean off and applying one coat of french polishing to required finish complete all as specified and as directed.

Side Board (FD-241) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table 900x600 with Drawer (FD-41 FD-283 FD-224 FD-55) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table bed side (FD-28 FD-276 FD-243) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table Dressing Gents (FD-31 FD-230) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table Dressing Ladies (FD-32 FD-251) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Bed plywood top (FD-246) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Binsoiled linen large (FD-70) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Chair dining (FD-16 FD-279) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Chair dining Map (FD/MAP II/04): Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Chair Easy (FD-17 FD-229) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Chair writing (FD-20 FD-280) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Hat stand with mirror (FD-233) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Peg table (FD-384 FD-25 FD-236) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Sofa Set 4 Seater (FD-258) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying ono coat of french polish to required finish complete all as specified and as directed.

Sofa Set 5 Seater (FD-281) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Stool Dressing (FD-27) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table 900x600 W/o Drawer (FD-284 FD-42) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table Centre (FD-29 FD-274 FD-235) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table dining 6 persons (FD-273 FD-239) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table dining 8 persons (FD-273 FD-239) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table office officer wooden (DB-4199) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Table writing (FD-249 FD-33 FD-275) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Teapoy (FD-34 FD-278 FD-232 FD-382) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

REENA INDUSTRIES (BID ID -3309611)

Vivek Engineers (BID ID -3307715)

SARGAM ENTERPRISES (BID ID -3313081)

Ms GHOSH AND SONS (BID ID -3310447)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3315842)

SKR ENTERPRISES (BID ID -3309715)

Mavee Syndicate (BID ID -3307341)