COMPREHENSIVE WELCOME MAINT AND ALLIED WORKS FOR NSM OSM AND REPAIR MAINT OF LEAKAGE SEEPAGE OF ROOF CHAJJA PROJECTION BATHROOM SUNKEN TREATMENT CLEANING OF OVER HEAD TANK AND CERTAIN ALLIED WORKS JCOS ORS MD ACCN UNDER GE MIS MHOW

Amount

Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

M&L for brickwork with sub class 'B' modular bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for half brick work in cement mortar (1:4 ) with using sub class `B' modular straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound complete all as specified and directed. Note: Supply only WPC shall be measured and paid separetly.

M&L for rendering 10 mm thick in cement mortar (1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed .

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 1-2mm thick putty on prepared surface and applying two coats of weather coat paint white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge. Note :- Each stage i.e preparation of surfaces, application of putty, application of primer, application of first coat and application of second coat will be got passed from Engr-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed

M&L for applying two coats of oil bound distemper over a coat of 1-2mm thick wall care putty on new plaster surface of walls after preparation of surfaces complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

M&L complete removal of existing treatment of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over one coat of white cement based putty (where it is required) all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over one coat of white cement based putty (where it is required) all as specified and directed.

M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling putty and applying one coat of cement based paint over one coat of primer complete all as specified and directed.

All as per item No. 15.00 above but two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured over one coat of birla wall care based putty (where it is required) complete all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately.

M&L one coat of 2mm thick wall care putty (2 coats of 1mm thick each coat) on walls/ceiling all as specified and directed

M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down with complete removal Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified and directed.

All as per item No. 20.00 above but on ceiling surfaces.

M&L for preparation of old painted surfaces of wood/wood based materials exc. 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

All as per item No. 22.00 above but on steel surfaces.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level ) complete including removal of debries out side MD land complete all as specified and as directed .

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base, levelling course, etc complete all as specified and as directed.

M&L for 40mm thick PCC type B1 (1:2:4) using 20 mm graded stone crushed stone aggregate as in flooring complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, including dismantling old floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.06 sqm, on vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement mortar in cement mortar 1:4 including dismantling old wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and and including 15mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling of old tiles complete all as specified and as directed.

M&L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x200x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in cement mortar (1:4) including dismantling of old tiles complete all as specified and as directed.

M&L in repair for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in cement mortar (1:4) including dismantling of old tiles complete all as specified and as directed.

M&L for heavy duty industrial vitrified coloured tiles of size 30cmx30cmx10mm thick (with grey cement and pigments) set,, jointed and pointed in neat cement slurry in floor, laid over and including 15mm thick cement screed base in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified

M&L for 75 mm thick PCC1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, sub base of floor, etc complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including15mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete all as specified and directed.

M&L for 20 mm thick granite thick machine cut, in floor bedded and jointed with grey ement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in cement mortar (1:4), granite polish to be done by mechanical grinder and moulding edges including dismantling of old granite/tiles compete all as specified and directed.

M&L for 20 mm thick granite (black) thick machine cut, 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 10 mm thick backing in cement mortar (1:4) including granite polish to be done by mechanical grinder and moulding edges including dismantling of old granite/tiles compete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (two layer) of capacity 1000 ltr (Cylindrical/vertical with closed top) , ISI marked hoisted & fixed in position complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank (two layer) of capacity 500 ltr (Cylindrical/vertical with closed top) , ISI marked hoisted & fixed in position complete all as specified and directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified and directed.

S&F in repair of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms) complete all as specified and directed.

S&F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and directed.

S&F in repair steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

All as per item No 45.00 above but 20mm bore complete all as specified and as directed.

S&F in repair 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repair 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm wall mixture with provision for bath telephone shower and overhead shower all as specified and directed.

S&F in repair 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specfied and directed by engr in charge.

S&F in repair concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repair stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed with PVC waste pipe complete all as specified and directed.

S&F in repair stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F in repair stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each.

M&L for stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack should not be less than 900x900 mm and weight of rack shall not be less than 8.5 Kg each.

S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings including flush pipe and fixing to supply pipe complete all as specified and directed

Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning in and ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes,etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white complete including connecting to flushing cistern and flush pipes complete all as specified and directed .

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) complete including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .

S&F in repair flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repair of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repair CP towel ring, dia not less than 200mm complete all as specified and directed.

S&F in repair CP toilet paper holder complete all as specified and directed.

S&F in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed.

S&F in repai plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.

S&F in repair wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & including MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm.complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair corner glass shelf (with bracket) complete all as specified and directed.

S&F in repair 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repair of CP grating 100mm dia complete all as specified and directed.

S&F in repair 25 mm dia aluminium powder coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .

S&F in repair CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription n exc. 1.00 sqm each complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription exc. 1.00 sqm but n exc. 2.00 sqm each complete all as specified and directed.

S&F in repair 100mm aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

All as per item No 84.00 above but 150mm long

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast iron - aluminium alloy 300 mm long complete all as specified and directed.

S&F in repair 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed by Engr in charge.

S&F in repair 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repair 50mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:4 ,cutting depth not exc. 10 cm complete all as specified and directed.

S&F in repair 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed complete all as specified and directed.

S&F in repair of floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repairs of Sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and directed.

Taking down shutters of any description n exc. 1.00 sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 sqm but n exc. 2.00 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n exc. 1.50 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc. 1.50 but n exc. 4.00 sqm each complete all as specified and as directed.

S&F 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 2nd class hard wood 35 mm thick glazed and skeleton(doors) factory made shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick factory made, 2nd class hard wood, glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

M&L 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F stainless steel butt hinges 100mm size medium weight and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 200mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.

S&F second class hardwood small fittings such as door and window stops and the like n.exceeding 200 cucm each fixed complete all as specified and directed.

S&F in repair 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

S&f in repair 18/19mm Veneered particle boards interior grade, solid core, general purposes type, faced with decorative veneers on one face of type 'BB', fixed with screws to timber frame work complete all as specified and directed.

S&F in repair 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and directed.

S&F in repair 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process complete all as specified and directed.

S&F in repair good quality stainless steel self closing hinge of 75 mm size for PVC door shutter complete all as specified and directed.

S&F in repair 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed.

S&F in repair 100 mm size MS mat / glossy finish handle complete all as specified and directed.

S&F in repair mild steel drawer cabinet channel for moving the drawer etc complete all as specified and directed.

S&F repair modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specified and directed.

All as per item No 124.00 above but basket size 0.50 m x 0.53 m x 0.15 m complete all as specified and directed.

All as per item No 124.00 above but basket size 0.50 m x 0.53 m x 0.21 m complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading complete all as specified and directed.

S&F aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

S&F galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised iron wire staples,etc complete all as specified and directed.

S&F sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty, in squares n exc. 0.50 Sqm in each pan complete all as specified and directed.

S&F figured glasspine head type 3mm thick ordinary quality and glazing with oil putty, in squares n exc. 0.50 Sqm in each pan complete all as specified and directed.

S&F in repair stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty complete all as specified and as directed.

S&F 0.50mm thick (total coated thickness) pre-colour, pre profiles Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions incl dismantling old Plain or corrugated steel sheeting,any gauge, thickness, complete all as specified and directed .

Cleaning of roof slab/chajja with sweeping with brooms, removing all depositions/mud/vegetations etc and removing the spoil to a distance n.exc 50m all as specified and directed.

Cutting of shurbs, vegetation including small trees, grass, bush, weed and roots under growth and saplings n.exc 30cm in girth on wall/roof/chajja upto 14.00m hight including necessary scaffolding/ ladder etc and removing to a distance n exc. 50m, clearing site all as specified and directed.

M&L for roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. Note : All demolished item shall be removed from Defence land as per direction of Engr-in Charge.

M&L for brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces complete all as specified and as directed.

M&L for cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement Sand slurry in the proportion of (1:3) by weight mix or as per manufacturers instructions complete all as specified and as directed. Note : All demolished item shall be removed from Defence land as per direction of Engr-in Charge.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with and including integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M&L for 10 mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M&L for screed bed 15mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed. Note:-WPC shall be measured and paid separately.

M&L for water proofing treatment complete on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete:- (i) Cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats . Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd /STP Ltd all as specified and as manufacturer instruction complete as per manufacturers instructions and as directed.

M&L for water proofing treatment to sunken floor surfaces of RCC slab by the following sequence including demolition/taking down and cleaning of old surface complete all as specified and directed :- (a) Plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed. (a) PCC (1:1.5:3) type A0 with (using 12.5mm graded stone aggregate) in slope of average thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or equivalent as approved by GE. (b) Rendering 15mm thick in cement mortar 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Applying two coats of black bituminous paint on complete surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc. (d) Spray of sand on bituminious surfaces. Note: water proofing treatment shall be done by the approved applicator.

M&L for PCC 1:2:4 type B 0 (using 12.5 mm graded stone aggregate) mixing with and including WPC as in levelling course and in sunken portions etc including demolition of old PCC complete all as specified and directed.

M&L for reparing of RCC roof projection, chajjas,roofs, facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , inserting the new reinforcement to damaged portion by drillig hole at required distance, fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete including necessary scafolding and safety devices as required at site complete all as specified and directed. Note : Work shall be carried out to the building of height 8.00m height and rate quoted shall be inclusive for necessary scafolding and safety devices as required at site. Nothing extra will be paid.

M&L for preparation of surface for application of water based epoxy resin coating of waterproofing for internal wall dampness and filling of cracks over & including cement mortar (1:4) and making the surface smooth and finished complete in following sequence complete all as specified and directed:- Note : (a) Complete removal of treatment/plaster(where needed) on internal walls and preparation of surface after rendering with cement mortar (1:4) for application and making the surface wet . (b) Applying first coat of Dr. fixit Dampguard in ratio (1U base:1U hardner:1U water) in one direction and leaving the coat to dry for 6 to 8 hrs. (c) Applying second coat of Dr. fixit dampguard in ratio(1U base:1U hardner:1U water) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. Material: Dr. fixit Dampguard or equivalent as approved by GE.

S&F mild steel work (tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete including dismantaling of old MS work of any position complete all as specified and directed.

M&L for preparation of new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Cutting channels, grooves or rebates n exc. 15cm girth, and trimming surface with or without reinforcement for inserting galvalume sheet on wall and necessary coping work over the sheet along the wall complete all as specified and directed.

M&L for 60 mm thick precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment and including packing of tiles with PCC type C1 (1:3:6) complete including dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for 80 mm thick precast concrete interlocking paver block (glossy finished) of M-40 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment and including packing of tiles with PCC type C1 (1:3:6) complete including dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.

S&F in repair tank cover for 500-1000 ltr capacity of over head water tank complete all as specified and directed.

S&F in repair brass spindles for bib tap and angle cock etc (as per sample kept in office) complete all as specified and directed.

sunrise enterprises (BID ID -3139642)

PARIDHI CONSTRUCTION (BID ID -3140074)

Sudarshan Associates (BID ID -3132492)

M/S Sunshine Construction (BID ID -3139803)

RK CONSTRUCTION (BID ID -3131982)