WBPHED/EE/MAAD/NIeT _16 of 2025-2026. Sl. No. 04

Supply following GI/CI/MS fittings etc.

15mm dia GI PIPE

d) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.

Supply of G.I. plain equal elbow of approved brand and make.

f) Saddle piece

Labour for fitting and fixing G.I. specials including cost of jointing materials.

(b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece. (i) Upto 25 mm dia.

(c) Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple.

Labour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.) (i)15 mm dia.

Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified

Making flange joint to DI/CI pipes, specials and valves where necessary with supply of required rubber insertion and nut bolts, washers etc. of approved quality and type all complete as per specification and direction of EIC (Nut and bolts shall be of TATA/GKW rate). 250mm dia

Supply and delivery of CIDF sluice valve(Special type ) PW-1.00of different dia makewith CI double flanged non rusting spindle sluice valves conforming to IS14846-2000with latest emendedhavingbodydome/bonnet andcoverof C.I.Gr-F.G210mtr. spindleof IS-6603G.R 12/Gr-13non magnetic,nutsseatringsareofGunonetalasperIS:318LTB-2flangesanddrilled toIS:1538Part IV&VI alvesaresuitableformax.workingpressureof10kg/cm2(seat test)and body tested to 15kg/cm2. N.B:The above item should be procured from the reputed manufactures as per deptt.approved vender list 250mm dia

Construction of RCC street stand post (700mm height) of RCC (1:1.5:3) footing over 75mm thick 4:2:1 P.C.C over a single B/F soling with 1% reinforcement, connected with saddle piece & 15mm dia brass ferrule with supplying fitting, fixing 15mm dia G.I. nipple, G.I.socket, G.I. 200mm x 150mm reducing elbow and 20mm dia GI(m) TATA pipe of (avg.) 2.6mtr. long and one 15mm dia alloy Iron with brass spindle bib cock with socket and 20mm G.I. elbow 2nos. with 15mm GI(m) TATA pipe of 0.225mtr. for connection of stand post to distribution line as per deptt. design and drawing as per direction of EIC along with Construction of platform of size CC platform (1:2:4) over a single B/F soling below G.L over 150mm.thick sand filling, neat cement finish over platform and inner side of band and 15mm thick cement plaster (4:1) on top of platform band and outside upto G.L. as per deptt. drawing and as per direction of EIC

Supply and laying of PVC/HDPE Pipe for House Service Connections including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder ,road sub-grade and its flanks but excluding moorum and laterite or sand stone hard rock including cutting of brick pavement etc all complete. (ref. item 2) Note: This Item shall be measured in conjuction with item 2. No payment/ part payment shall be made for supply of pipe material only. HDPE Pipe for House Service Connection: Pipes shall be made out of HDPE raw materials, the pipes shall be conforming to 15:4984-2016, 20mm dia OD, PE-100, PN 16. Challan of pipes & specials and 3rd party test certificate should be submitted by the agency before commencement of works.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. (As on survey report 65% of pipe length is under concrete road)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(Pakur Variety). (As on survey report 65% of pipe length is under concrete road)

Add Includng GST @18%

Add Includng CESS @1%

Please Enable Macros to View BoQ information