Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹72.6 LAccepted-AOC HOUSE NO 165 A VILLAGE POST MORTA DISTT GHAZIABAD U P PIN 201003 | GHAZIABAD | GHAZIABAD | UTTAR PRADESH | 201003 | L-1 | Accepted-AOC Lowest bidder | |
| 2 | L-2₹74.0 L+₹1.4 L (1.91%)Rejected-Finance | L-2 | Rejected-Finance Not lowest bidder | |
| 3 | L-3₹76.1 L+₹3.6 L (4.93%)Rejected-Finance OPP AIR FORCE STATION VPO SORANA DISTT SAHARANPUR UP PIN 247 232 | SAHARANPUR | UTTAR PRADESH | 247232 | L-3 | Rejected-Finance Not lowest bidder | |
| 4 | L-4₹77.8 L+₹5.2 L (7.20%)Rejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L-4 | Rejected-Finance Not lowest bidder | |
| 5 | L-5₹79.6 L+₹7.1 L (9.72%)Rejected-Finance 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L-5 | Rejected-Finance Not lowest bidder |
| Sl No | Description | Qty | Unit | RADHA ENTERPRISES L6 | NAVEEN KUMAR TYAGI L1 | M/s Inderlal L2 | KULWANT SINGH L4 | BAL SINGH AND SONS L5 | SUBHASH CHAND CONTRACTOR L3 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for repair to potholes of depth not exceeding 30mm, area not exceeding one sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. by using pressured air, cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), applying priming/tack coat with bituminous primer(paving bitumen grade VG-10) @ 5 Kg per 10 sqm by using mechanical sprayer, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) complete all as specified & directed.
Note: A Board of Officers shall be ordered by GE well before execution of item to ascertain the quality, quantity & locations of work. | 30 | Ten Sqm | 1,100 ₹33,000 | 1,000 ₹30,000 | 1,100 ₹33,000 | 1,200 ₹36,000 | 1,000 ₹30,000 | 500 ₹15,000 Lowest |
| 2.00 | Material and labour for preparing of existing black top surfaces of road by brushing with wire brushes for removing caked mud, grass etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all dust/dirt and applying evenly a priming/tack coat of bituminous primer (paving bitumen grade VG-10) @ 5 Kg per 10 sqm by using mechanical sprayer complete all as specified & directed.
Note: A Board of Officers shall be ordered by GE to ascertain the quantity & locations of item well before execution. | 2,360 | Ten Sqm | 251 ₹5,92,360 | 170 ₹4,01,200 | 278 ₹6,56,080 | 100 ₹2,36,000 Lowest | 200 ₹4,72,000 | 200 ₹4,72,000 |
| 3.00 | Material and labour for laying premix bituminous macadam using 20mm size graded crushed stone aggregate (grading 2 with nominal aggregate size 19mm), mixed with binder content (paving bitumen grade VG-30) @ 4% by weight of total mix, rolled and compacted with 8 tonne to 12 tonne power road roller to required gradient and camber using full width mechanical paver (consolidated thickness not exceeding 75mm) in single layer complete all as specified & directed.
Notes: (i) For price adjustment of bitumen & other requirements of design mix, refer Sch 'A' Notes/Particular specifications.
(ii) A Board of Officers shall be ordered by GE to ascertain the quantity & locations of item well before execution. | 25 | Cum | 6,500 ₹1,62,500 | 6,000 ₹1,50,000 | 5,500 ₹1,37,500 | 5,000 ₹1,25,000 | 4,800 ₹1,20,000 Lowest | 5,000 ₹1,25,000 |
| 4.00 | Material and labour for laying 30mm thick (consolidated thickness) bituminous pre-mixed, hot mix, semi-dense asphaltic concrete with coarse aggregate of grading 1 as per MORT&H specification in single layer using binder content (paving bitumen grade VG-30) @ 5.5% by weight of the total mix as per design mix including supply and mixing of filler (OPC cement) laid, rolled and compacted to required gradient and camber using full width mechanical sensor paver with string sensor and compacted with 8 tonne to 12 tonne power roller complete all as specified & directed.
Note: For price adjustment of bitumen & other requirements of design mix, refer Sch 'A' Notes/Particular specifications. | 2,310 | Ten Sqm | 2,500 ₹57,75,000 | 2,500 ₹57,75,000 | 2,450 ₹56,59,500 Lowest | 2,800 ₹64,68,000 | 2,800 ₹64,68,000 | 2,700 ₹62,37,000 |
| 5.00 | Demolition of Plain cement concrete (un-reinforced) as in kerb stone of any description and in any position not otherwise specifically provided including removal of debris to a distance not exceeding 500 mtr complete all as specified & directed | 5 | Cum | 399 ₹1,995 | 300 ₹1,500 | 50 ₹250 Lowest | 100 ₹500 | 100 ₹500 | 300 ₹1,500 |
| 6.00 | Material and labour for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed.
Note: (i) The rates include for the use of forms, moulds or machine moulds and setting the blocks, slabs, etc. complete including raking back the joints of the internal faces (at least 10 mm) for pointing as the work proceeds or finishing with neat flush joints.
(ii) Earthwork (if any) wherever requierd deemed to be included in quoted rates. | 5 | Cum | 7,000 ₹35,000 | 5,000 ₹25,000 Lowest | 7,000 ₹35,000 | 6,500 ₹32,500 | 6,500 ₹32,500 | 5,000 ₹25,000 Lowest |
| 7.00 | Material and labour for preparation of newly plastered/concrete surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including one coat of compatible primer complete all as specified & directed. | 45 | Sqm | 51 ₹2,295 | 165 ₹7,425 | 45 ₹2,025 Lowest | 50 ₹2,250 | 60 ₹2,700 | 50 ₹2,250 |
| 8.00 | Material and labour for preparing bituminous surface of roads and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and directed.
Note: Hot applied thermoplastic road marking materials shall be confirming to BS 3262-1989. | 665 | RM | 400 ₹2,66,000 | 300 ₹1,99,500 | 420 ₹2,79,300 | 40 ₹26,600 Lowest | 50 ₹33,250 | 90 ₹59,850 |
| 9.00 | Supply and fixing in repair cat eye solar reflective type of metal body of size 110mm x 120mm x 2400mm weight not less than 435 gms, having 50 mm long shank with PMMA striplens reflector & fixed and incl MS stud of suitable size as per manufacturer's instructions complete all as specified & directed. | 200 | Each | 300 ₹60,000 | 300 ₹60,000 | 75 ₹15,000 Lowest | 500 ₹1,00,000 | 250 ₹50,000 | 300 ₹60,000 |
| 10.00 | Supply and fixing as in replacement Solar road stud (100% water proofing design according to IP-67), any tint, 2 way, aluminium alloy shell body, size 125mm x 125mm x 25mm(with shank of 65mm) having two highly reflective reflectors ,Solar powered by Mono-Crystalline solar panel fitted with 6 pieces(3 pieces on either sides) LED's of different clolur with one high capacity Ni-cd rechargeable battery backup of 12 hours continuous lighting at night view distance 1000metre approx, designed to bear load upto 10 tonnes fixed with approved epoxy adhesive as per manufacturer's instructions complete all as specified & directed.
Make:- Dark Eye / 3M / Tata BP Solar / Pioneer Swift / Shakti / Sheetal | 30 | Each | 1,500 ₹45,000 | 1,250 ₹37,500 Lowest | 1,380 ₹41,400 | 1,800 ₹54,000 | 1,600 ₹48,000 | 1,300 ₹39,000 |
Tender Value
₹95 L
EMD Value
₹1.7 L
Closing Date
21 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Ambala
HQ CWE (AF) Ambala Cantt, PIN-133001
REPAIR TO CERTAIN ROADS IN DOMESTIC AND TECHNICAL AREA AT AF STN SARSAWA UNDER GE AF SARSAWA
2025_MES_730993_1
CWE/AF AMB/SAR-28/2025-26
Open Tender
Civil Works - Roads
Item Rate
180 days
Sarsawa
For MES enlisted contractor Class C Category a (v) and for un-enlisted contractor refer NIT
8 documents required · 8 mandatory
₹1,000
GE (AF) Sarsawa
₹1.7 L
Yes
1 Dec 2025
15 Sept 2025
23 Oct 2025
15 Sept 2025
21 Oct 2025
7 Oct 2025
15 Sept 2025 - 1 Oct 2025
Amount
Material and labour for repair to potholes of depth not exceeding 30mm, area not exceeding one sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. by using pressured air, cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), applying priming/tack coat with bituminous primer(paving bitumen grade VG-10) @ 5 Kg per 10 sqm by using mechanical sprayer, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 Kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) complete all as specified & directed. Note: A Board of Officers shall be ordered by GE well before execution of item to ascertain the quality, quantity & locations of work.
Material and labour for preparing of existing black top surfaces of road by brushing with wire brushes for removing caked mud, grass etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all dust/dirt and applying evenly a priming/tack coat of bituminous primer (paving bitumen grade VG-10) @ 5 Kg per 10 sqm by using mechanical sprayer complete all as specified & directed. Note: A Board of Officers shall be ordered by GE to ascertain the quantity & locations of item well before execution.
Material and labour for laying premix bituminous macadam using 20mm size graded crushed stone aggregate (grading 2 with nominal aggregate size 19mm), mixed with binder content (paving bitumen grade VG-30) @ 4% by weight of total mix, rolled and compacted with 8 tonne to 12 tonne power road roller to required gradient and camber using full width mechanical paver (consolidated thickness not exceeding 75mm) in single layer complete all as specified & directed. Notes: (i) For price adjustment of bitumen & other requirements of design mix, refer Sch 'A' Notes/Particular specifications. (ii) A Board of Officers shall be ordered by GE to ascertain the quantity & locations of item well before execution.
Material and labour for laying 30mm thick (consolidated thickness) bituminous pre-mixed, hot mix, semi-dense asphaltic concrete with coarse aggregate of grading 1 as per MORT&H specification in single layer using binder content (paving bitumen grade VG-30) @ 5.5% by weight of the total mix as per design mix including supply and mixing of filler (OPC cement) laid, rolled and compacted to required gradient and camber using full width mechanical sensor paver with string sensor and compacted with 8 tonne to 12 tonne power roller complete all as specified & directed. Note: For price adjustment of bitumen & other requirements of design mix, refer Sch 'A' Notes/Particular specifications.
Demolition of Plain cement concrete (un-reinforced) as in kerb stone of any description and in any position not otherwise specifically provided including removal of debris to a distance not exceeding 500 mtr complete all as specified & directed
Material and labour for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed. Note: (i) The rates include for the use of forms, moulds or machine moulds and setting the blocks, slabs, etc. complete including raking back the joints of the internal faces (at least 10 mm) for pointing as the work proceeds or finishing with neat flush joints. (ii) Earthwork (if any) wherever requierd deemed to be included in quoted rates.
Material and labour for preparation of newly plastered/concrete surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including one coat of compatible primer complete all as specified & directed.
Material and labour for preparing bituminous surface of roads and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and directed. Note: Hot applied thermoplastic road marking materials shall be confirming to BS 3262-1989.
Supply and fixing in repair cat eye solar reflective type of metal body of size 110mm x 120mm x 2400mm weight not less than 435 gms, having 50 mm long shank with PMMA striplens reflector & fixed and incl MS stud of suitable size as per manufacturer's instructions complete all as specified & directed.
Supply and fixing as in replacement Solar road stud (100% water proofing design according to IP-67), any tint, 2 way, aluminium alloy shell body, size 125mm x 125mm x 25mm(with shank of 65mm) having two highly reflective reflectors ,Solar powered by Mono-Crystalline solar panel fitted with 6 pieces(3 pieces on either sides) LED's of different clolur with one high capacity Ni-cd rechargeable battery backup of 12 hours continuous lighting at night view distance 1000metre approx, designed to bear load upto 10 tonnes fixed with approved epoxy adhesive as per manufacturer's instructions complete all as specified & directed. Make:- Dark Eye / 3M / Tata BP Solar / Pioneer Swift / Shakti / Sheetal
Supply and fixing as in repair metal tubular delineator made out of ABS round body fitted with 2 Nos. 65mm dia highly reflective reflectors made out of PMMA and mounted on 45mm/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection, workable for 2-3 days (nights) after full charge for 8-10 hours including PCC 1:2:4, type B1 (minimum size 150mm x 150mm x 300mm) and necessary excavation/earthwork for embedding of delineator complete all as specified & directed. Make:- Dark Eye / 3M / Tata BP Solar / Pioneer Swift / Shakti / Sheetal
Dismantling posts or struts (steel or RCC) any section, including taking out embedded portion of post in concrete, brick work, masonry etc. and making good disturbed ground complete all as specified & directed.
Material and labour for stainless steel (Grade 304) framework for road sign board, made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or as directed with suitable arrangement complete all as specified & directed. Note: Earthwork (if any) wherever requierd deemed to be included in quoted rates.
Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including
making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Note: SS framework for road sign board shall be measured & paid seperately. Make:- Dark Eye / 3M / Tata BP Solar / Pioneer Swift / Shakti / Sheetal
Material and labour for plain cement concrete(PCC) 1:2:4, type B2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Material and labour for 100 mm thick plain cement concrete (PCC) 1:4:8, type D-2 using 40mm graded mechanically crushed stone aggregates, as in subbase of floors complete all as specified & directed.
Material and labour for 75 mm thick plain cement concrete (PCC) 1:3:6, type C-2 using 40mm graded mechanically crushed stone aggregates, as in subbase of floors complete all as specified & directed.
Demolition of Plain cement concrete (un-reinforced) in ground floors and pavings exceeding 15cm thickness (below or above ground level) including removal of debris to a distance not exceeding 500 mtr complete all as specified & directed
Material and labour for providing & laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed.
For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted in total quoted amount of BOQ to arrive contract sum.
M/s Inderlal (BID ID -3450922)
SUBHASH CHAND CONTRACTOR (BID ID -3450450)
KULWANT SINGH (BID ID -3456507)
BAL SINGH AND SONS (BID ID -3450397)
RADHA ENTERPRISES (BID ID -3449175)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
Tender28.pdf
Tender Documents • 0.85 MB
BOQ_818382.xls
BOQ • 0.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .