Civil, structural, and other miscellaneous works including internal electrification works for compound wall, security building, entrance gate and other miscellaneous works etc. At Proposed site of 50 TLPD Dairy Plant-Dhemaji

Excavation in soil/terrain/land at the project site which includes all kinds of soils or rock or soils and rock which can be excavated by Manually or by Mechanical excavators or by heating or by any other approved method or by all of these methods or by any combination of these methods and up to 1.50 M depth from Existing Ground Level(GL/EGL/NGL) or the terracing level formed by massive cutting whichever is lower, for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, pits, underground sumps, ETP tanks, septic tank, soak well, manhole chamber, gully chamber, Utility chamber, inspection chamber, catch pit chamber, equipment foundation, machinery foundation, box cutting for formation of road, including all lift, shoring, strutting, bailing out water/pumping off water if required, re-filling the trenches, foundation pits etc all as excavated, ramming, watering, consolidating in 30 cms to 40 cms layers as directed, the item also includes all the lift and all the lead for handling and re-handling of all the earthwork operations involved for removing and stacking the excavated stuff any where within the site area or at the nearby other plot/location; simultaneously or intermittently or as and when required, including bringing back the excavated stuff as and when required for re-filling or plinth filling, for land development, back-filling etc at the project site including all the operations of levelling and consolidation etc complete as directed. The excavated surplus earth stuff at the project site and at the nearby other plot shall be levelled as directed. (Refer Item no. 1.01 for detailed specifications in Section IV). In the case of excavation required in the filling areas at a later stage and as directed, the same shall be measured from the level of filling carried out already, if any for the consideration of depth (lift). This item shall not be applicable for massive cutting-filling works for land terracing which shall be paid under relevant item provided separately under this contract. For excavation in trenches for laying of pipes and cables (and all the services), excavation and all related earthwork are included under the respective items of pipes and cables etc services even if it is not specified under the respective item. Bidder must visit the project site and arrange to evaluate about the type of soil/terrain/land exist there and the actual lead distance between the project site and the nearby plot/location of the Service Note : For detailed specifications please read Section V instead of Section IV

Providing and filling approved local sand free from debris,pebbles etc in trenches, plinth, under sub base surrounding areas including screening, watering and consolidation, transportation, loading, unloading, spreading etc. complete as directed. (Refer Item no. 1.10 for detailed specifications in Section IV ) Note : For detailed specifications please read Section V instead of Section IV

Providing & laying in position machine mixed and machine vibrated cement concrete of controlled grades for reinforced cement concrete structural elements in any shape, size, thickness or depth and design viz. foundations, columns, beams, slabs, raft, floor plinth beams, plinth beam ledges, window sills, copings, thin band beams, walls parapets boxes, folded plates, chajjas, mullions, retaining walls, fins, staircases, overhead and underground water and other fluid tanks, statically loaded foundation rafts/floor, water troughs, manhole slab, septic tank slab, soak well slab etc. its concrete elements in any shape, size, thickness/depth and design as per structural design and as directed in specified compressive strength compressed in N/mm2 at 28 days as per IS 456-2000 using 20 mm or as specified size of crushed stone aggregates including design of concrete mixes, auto weigh batched proportioning, cost of admixtures, necessary lift and lead as specified, finishing concrete surfaces, curing etc. complete but excluding centring/shuttering and reinforce-ment. The conversion of weigh batching to equivalent volumetric one, if permitted, should be got approved from Engineer before execution. For concrete grade M- 25 to all height from highest plinth level.

Providing and erecting in position form work shuttering & boxing using steel/plywood shuttering materials of approved quality for concrete elements vertical, horizontal, inclined, circular, curved etc. in all sizes, shapes and designs as per drawing including necessary staging at all intermediate levels, scaffolding, bolts/nuts, fastener nails, wires for keeping in position till concrete is laid and members have acquired required strength, removal thereafter, applying shuttering oil etc. complete as directed. Form Work in superstructure to all heights above highest plinth level for all concrete elements of any shape, size & direction etc c

Supplying and mixing with cement for cement concrete/cement mortar, integral water proofing compound approved make & quality as per the requirements and manufacturer’s specifications etc. complete as directed. Note : The item unit rate is Litre

Providing and fixing of concrete compound wall having height of minimum 2.1 metres made with precast pre-stressed reinforced cement concrete posts having 8 nos, 4mm dia GI wires as reinforcement steel and of M 35 grade of concrete as per following details. (1) Excavation in any type of soil for foundation pits of minimum size (500mm x 500mm x minimum 800mm deep) including filling the excavated earth as directed followed by compaction (2) Laying of Plain cement concrete (1:2:3 proportion) for pits (500mmX500mmX minimum 800mm) for erection of pre-stressed RCC posts. The spacing of RCC posts shall be according to the length of concrete panel/plank (3) Providing and fixing in line level & plumb the Pre-cast RCC post of M-35 grade concrete of size (2950 mm long x 150 mm wide x 150 mm thick having grooves for the provision of tightly fixing the pre-cast pre-stressed concrete wall panels/planks) as per requirement & details including provision for fixing of MS angle posts for fixing wire fencing over it etc. (4) Providing and fixing pre cast planks(panels) of pre-stressed Cement concrete of M-30 grade of size (2100 mm long x 300 mm wide x 38 to40 mm thick) and having three nos. 4mm dia GI wires as reinforcement steel in line, level & plumb including filling joints with cement slurry or as per the recommendations of manufacturer etc completed as per the drawings and as directed. The item includes excavation, concrete and all the pre-stressed concrete works including labour cost etc complete. Note : 1)The excavation in any type of soil/rock for foundation pits is included in this item.

Providing & Fixing 4mm thick Compact sheet in aluminium door and partitions. Compact sheet shall be made from solid grade compact High Pressure Laminate manufactured under high pressure and temperature with bunch of kraft papers and decorative papers including approved quality PVC/ neoprene gasket etc complete as directed. (Cost of aluminium snap beading and aluminum sections shall be paid separately against the respective item) Note : The thickness of sheet shall be read as 6mm in place of 4mm. Compact sheet shall be high pressure liminated (HPL) as per IS 2046 (Thermosetting Synthetic Resin Bonded Laminated Sheet) and of type S, P or P.

Providing and fixing Satin Stainless steel finish grade 316 floor mounted door stopper approved or equivalent make, including the cost of screw and other incidental charges complete.

Providing & fixing 12 mm thick Hilux Calcium Silicate Board Water resistant, Non Combustible, (As Per BS Standard, Certified by CBRI Roorkee) Termite & Vermin proof, Eco- Friendly of approved or equivalent make in Aluminium door, window, ventilator, partition or similar such other location so called for with PVC / Neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge

Providing and fixing concealed lock in sliding windows of approved make & shade as directed.

nish butt hinges of sizes 125x75x3mm with 4 Nos. Ball Bearing of approve make , including necessary screws etc. complete as directed by Engineer In charge.

Providing and fixing double action hydraulic floor spring of approved brand/make and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Providing and applying 12 mm thick plain cement plaster finish at all heights and below highest plinth level in Cement Mortar (CM) 1:4 (1 part cement: 4 parts sand- 50% coarse and 50% fine) in line, level and plumb to the walls, concrete elements, beams, ceiling, stair, columns, pardis, including making plaster bands, stripes, moulds, pattas, grooves etc, over any brick or concrete surface as specified including scaffolding, curing and finishing smooth, complete as directed.

Providing and laying cement water-proofing of average 115 mm thick for balcony, terrace etc at all the levels, with layer of 20 mm thick cement mortar 1:3 ( 1 part cement : 3 part coarse sand )mixed with water proofing compound of approved make and as specified by the manufacturer, laying brick bats of required size impregnating in to the base mortar bed with gap of 12 mm all around according to slope, level and curing the same, the gaps around brick bats filled with cement mortar 1:3 (1 part cement : 3 part coarse sand) mixed with waterproofing compound as above , 15 to 20 mm layer above brick bats and finishing top with neat cement @ 2.75 Kg/Sq.M. making square 300 x 300 mm chequered finish marks with string , finishing around rain water outlets curing etc. complete including furnishing of guarantee for 10 years. The work should be carried out through an approved specialised agency like India Water Proofing Co. or equivalent.

Providing, fabricating and fixing in position, grill, railing, steel ladder, Safety MS bars to windows/ ventilator of MS rolled sections as per architect’s details including cutting welding, grinding to smooth surface, fixing hold fast of MS sections embedded in concrete 1:2:4 (1 part cement, 2 part coarse sand, 4 part of stone aggregate 12 mm and down), anchor bolts including 2 or more coats of first quality synthetic enamel paint of approved make over a coat of primer etc. complete as directed.

Providing, fabricating and fixing in position MS inserts such as nosing, corner angles of columns, plates, flats, tee’s, protection

Dismantling stone/Brick masonry walls or partition wall plastered or un plastered as per instructions including finishing the broken surface to match with the surroundings, removal and disposal of debries within site including cutting the reinforcement bars, if any etc. complete as directed.

Dismantling the RCC beams, slabs, lintels, columns, pardi, walls, platform etc. including finishing the broken surface to match with the surroundings, removal and disposal of debries within site, including cutting the reinforcement/ MS inserts stacking the same and handing over to stores / yard within site etc. complete as directed.

Dismantling steel work in built up sections in angles, tees, flats, pipes, chain link, barbed wire, baseplate and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. at all heights including dismembering and stacking within the premises upto a lead of 350m. and scaffolding complete as directed.

Surface dressing including preparation of sub grade of road bringing earth work to required grade, slope and camber in the existing surface, including cutting or filling earth up to 300 mm thickness, watering, consolidation with 8-10 MT Power Road Roller, etc. complete as per details and as directed. Note : Surface dressing depth of cuttting or filling exceeds 300 mm depth, increased depth will be paided in relevent filing or excavation item.

Providing and laying interlocking pavement stones of approved quality, shape, size , colour and make having compressive strength of minimum 250 kg/sq.cm and thickness not less than 80mm with smooth / approved finish and edges duly chamfered over a water compacted 50 mm thick natural sand bed to the required line, level and compacting the stones laid by plate vibrator including cost of labour for Surface dressing including preparation of sub grade of road bringing earth work to required grade, slope and camber in the existing surface, including cutting or filling earth up to 300 mm thickness, watering, consolidation with 8-10 MT Power Road Roller, etc. complete as per details and as directed

Providing and fixing 1.8 M height chain link fencing as per drawing / details : a) Providing and fixing 49.5mm x 49.5mm x3.66mm ( Weight/RM - 4.93 kg) MS medium class box section, 2.5 meter long with 150 x 150 x 6 mm thick base plate with necessary clits of 50 x 6 MS flat on the pole, at 2.5 M c/c, 500 mm grouted in toe wall or ground in CC 1:2:4 block of size 45 x 45 x 50 cms., including necessary excavation, c/s. ( The toe wall will be measured under relevant item of works ), b) To form rectangular panel frame out of ISA 50 x 50 x 6, 1.8 M vertically apart and between two vertical hallow box support, welded with matching MS angle / flat clits so as to form the rectangular panels with necessary welding, nuts and bolts and washers, c) Chain link of 50 x 50mm size -10 gauge, covering the panels of MS angles, fixed with 32 x 6 mm MS flat as beading with making necessary holes and fixing with 10 mm dia 40 mm bolts with washers, nuts etc. complete. d) Painting the vertical posts, Note : Item incudes painting of chainlink fencing,framing and posts with two or more coats of approved first quality synthetic enamel paint or aluminium paint over a coat of primer of approved make.

Providing, fabricating and fixing in position 8 mm dia. TMT reinforcement steel bars of minimum grade Fe 415 confirming to IS 1786 - 1985 of approved or equivalent make for RCC structures as per design including transporting, unloading and incidental charges for handling cutting, bending, and binding with two strands of annealed steel wire of 18 gauge, welding if necessary etc. complete as directed.

Providing and fixing/ laying of conduit and wires for Light point wiring with 1.5 sq. mm PVC insulated, FRLS, copper conductor (stranded) 1100V grade wires alongwith earthing in 25mm dia. medium duty PVC surface/ concealed conduit system including providing and fixing one no. 10 Amp single pole modular switch grid plate mounted with moulded cover plate in zinc chromate passivated GI box suitable for modular switch, complete in all respect ( wiring & conduiting up to switchboard not included in item cost), for two light points controlled by one switch.

Providing and fixing/ laying of conduit and wires for Ceiling fan point wiring with 1.5 sq. mm PVC insulated, FRLS, Cu. conductor (stranded) 1100V grade wires alongwith earthing in 25 mm dia. Medium duty PVC surface/ concealed conduit system including providing and fixing one no. modular 10A single way switch, grid plate mounted with moulded cover plate, two module electronic stepped fan regulator in zinc chromate passivated GI box suitable for modular switches, with GI box for fan suspension, complete in all respect ( wiring & conduiting up to switchboard not included in item cost).

Installation of recess mount light fixture in false ceiling having 600X600mm tiles by providing 6 mm thick water and termite proof plywood sheet (size: 590X590 mm) with suitable cutout in plywood and tile. Item includes connection and testing of light fixture.

Installation, testing and commissioning of any Type Surface Mounted LED Down Light Fixture with all required accessories.

Providing and laying earth continuity conductor in ground/ on surface of building with necessary clamps as required, of size – GI strip 25X3mm

Providing and fixing/laying of conduit and wires for 1 Telephone point in one box wiring (from telephone tag box to point ) with 4 pair, un-armoured, PVC insulated and sheath, 0.51 mm dia. Annealed tinned Cu conductor in 25 mm Medium duty PVC surface/ concealed conduit system including providing and fixing one no. flush type RJ11 modular telephone socket outlet, grid plate mounted with moulded cover plate in zinc chromate passivated GI box.