86097REPAIRS TO INTERNAL ROADS INCLUDING ROAD FURNITURE ITEMS IN THE AREA OF OTHER THAN AFMC UNDER GE CENTRAL PUNE.

Amount

M&L for repair to pot holes any depth, n.exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, paths etc, cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), applying evenly priming/tack coat primer using paving bitumen @2.5 kg per 10 sqm and providing bituminious premix asphaltic semi dense concrete (Design mix) 30 mm thick (Consolidated) thickness with 5.5% binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and as directed.

M&L for preparing existing black top surface by wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dust/dirt etc and applying evenly a priming/tack coat with bituminious primer VG 30 @ 5kg per 10 sqm on black top surface and providing bituminous premix asphaltic semi-dense concrete (design mix) ,30 mm thick (consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix) using mechanical paver rolled with 8 to 12 tonne power roller and compacted to required camber and gradient to an uniform smooth surfaces complete all as specified and directed.

M&L for preparation of black top surfaces of road and applying 2mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm width, by mechanical machine, white or golden yellow complete all as specified and as directed. Make of Paint : CM- Bombay / Shiralik prime-Chadigarh / Ritco - Meerut / SN Industries Delhi as approved by GE

S&F in repair high intensity ABS Plastic road stud of size varying from 100x100x20mm to 110x90x17mm and colour of body amaber, red or white, two way reflective 180 degree and fixing stud with approved high intensity thermoplastic adhesive bond & nailing the same on specified section of the road with MS anodised pin of standard pattern of manufactures 8 x 37mm long including cutting making holes on road for proper fixing of the same complete all as specified and as directed. Make: 3M /Drak Eye or equivalent as approved by GE.

SUBHADRA ENGINEERING AND FABRICATOR

Sunshine Ventures