Loading…
Loading…
Tender Value
₹8.4 Cr
EMD Value
₹8.4 L
Closing Date
15 Jun 2026, 11:00 am
Construction Interior works for Start Up Incubation Center and center for Public Policy at Chandragupt Institute of Management Patna CIPM Patna Bihar
NBCC/SBG/etender/2026/184
NBCC/SBG/etender/2026/184
Open Tender-Domestic
Civil Works - Buildings
Patna, Bihar
₹11,800
₹8.4 L
1 Jun 2026
1 Jun 2026
15 Jun 2026
15 Jun 2026
Name of Work: CONSTRUCTION,INTERIOR & RENOVATION WORKS FOR START- UP
INCUBATION CENTRE AND CENTRE FOR PUBLIC POLICY AT CHANDRAGUPT INSTITUTE OF
SUMMARY OF COST-INCUBATION CENTRE
Sl No. Sub - Head Amount Remarks
1 CIVIL WORKS 48,92,619.40
2 ELECTRICAL WORKS 1,15,99,999.00
3 PLUMBING & SANITARY WORKS 8,64,671.56
4 INTERIOR WORKS 2,22,95,730.84
5 FURNITURE & AUDIO VSUAL WORKS 80,96,215.00
6 Misc Works 67,26,528.89
Digitally signed by PRIYA
BOQ OF CIVIL WORK
RENOVATION & INTERIOR WORK IN START-UP INCUBATION CENTRE AT CIMP, PATNA
DSR23 Description of Items Unit Qty Rate Amount
A. CIVIL WORKS - SCHEDULE ITEMS
DISMANTLING & DEMOLISHING WORK
Demolishing brick work manually/ by mechanical means including stacking
1 15.2 of serviceable material and disposal of unserviceable material within 50 metres
15.2.2 Nominal concrete 1:4:8 or leaner mix (including equvivalent design mix) Cum 189.73 1503.60 2,85,278.03
3 15.5 Extra for cutting reinforcement bars in RCC or RB work. Sqm 98.40 1147.20 1,12,884.48
Demolishing brick work manually/ by mechanical means including stacking
4 15.70 of serviceable material and disposal of unserviceable material within 50 metres
lead. As per direction of Engineer-in-charge.
15.7.4 In Cement Mortar
Dismantling doors, windows and clerestory windows (steel or wood) shutters
5 15.12 including chowkhats, architrave, hold fasts etc complete and stacking within
a Of area 3 Sq.m. and below
b Of area beyond 3 sq. metres
Dismantling the tile work in floors and roofs laid in cement including stacking
of materials within 50 m lead. Digitally signed by PRIYA
DSR23 Description of Items Unit Qty Rate Amount
15.23.1 For thickness of tiles 10 mm to 25 mm
Dismantling cement, asbestos, celotax or other ceiling or partition hard board
7 15.41 partition wall including stacking of serviceable materials and disposal of
unserviceable materials within 50 m lead.
Disposal of building rubbish / malba / similar unserviceable, dismantled or
waste materials by mechanical means, including loading, transporting,
8 15.6 unloading to approved municipal dumping ground or as approved by
Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts
Old walls structure-
All dispose material-
B. CIVIL WORKS - NEW CONSTRUCTION
Brick work with common burnt clay F.P.S (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 Cement : 6 Coarse sand)
Inside Wall - New
6th Floor (Terrace)
Digitally signed by PRIYA
DSR23 Description of Items Unit Qty Rate Amount
Extra for brick work with best available local bricks in superstructure above
plinth level up to floor two level.
PLASTERING WORKS
11 13.1 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
Both side of Wall - New
6th Floor (Terrace)
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single
or half brick wall.
Periphery Face all 4 Floor
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS : 15622, of approved make, in all colours and shades, laid on
13 11.41 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey
cement slurry @3.3 kg/sqm including grouting the joints with white cement
and matching pigments etc.complete
Digitally signed by PRIYA
DSR23 Description of Items Unit Qty Rate Amount
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make, in all
colours, shades except burgundy, bottle green, black of any size as approved
by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick
15 8.31 bed of cement mortar1:3 (1 cement : 3 coarse sand) and jointing with grey Sqm 400.00 1267.95 5,07,180.00
cement slurry @ 3.3kg per sqm, including pointing in white cement mixed
with pigment of matching shade complete
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6
mm in floors, jointed with neat cement slurry mixed with pigment to match
16 11.19 the shade of the tiles, including rubbing and polishing complete, on 20 mm
thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
11.19.1 Light shades using white cement Sqm 16.00 1,533.80 24,540.80
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm
(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and
17 11.56 jointed with cement slurry and pointing with white cement slurry admixed
with pigment of matching shade including rubbing, curing and polishing
etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby
Red or equivalent
Providing and applying white cement based putty of average thickness 1mm,
of approved brand and manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete.
Digitally signed by PRIYA
DSR23 Description of Items Unit Qty Rate Amount
Distempering with 1st quality acrylic distemper (ready mixed) having VOC
(Volatile Organic Compound ) content less than 50 gram/ litre, of approved
24 brand and manufacturer including applying additional coats wherever sqm 249.96 185.65 46,405.80
required to achieve even shade and colour. 13.81.1 Old work (one or more
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
25 13.82 manufacture, including applying additional coats wherever required, to sqm 366.00 137.45 50,307.12
achieve even shade and colour.
13.82.2 Two coats
Wall painting with premium acrylic emulsion paint of interior grade, having
VOC (Volatile Organic Compound ) content less than 50 grams/ litre of
28 13.83 approved brand and manufacture, including applying additional coats sqm 390.35 142.8 55,741.98
wherever required to achieve even shade and colour.
13.83.2 Two coats
GRAND TOTAL 50,28,385.82
GRAND TOTAL 50,28,385.82
Multiply GST Factor 48,92,619.40
Digitally signed by PRIYA
PROJECT: RENOVATION & INTERIOR WORK OF START-UP INCUBATION CENTRE AND CENTRE FOR PUBLIC POLICY AT CIMP PATNA
CLIENT- CHANDRAGUPTA INSTITUTE OF MANAGEMENT, PATNA
ESTIMATE - ELECTRICAL WORKS OF INCUBATION CENTER
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
SUBHEAD :1 WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable in surface / recessed
medium class PVC conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable etc. as required.
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call
bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed PVC conduit
etc as required.
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2
3 1.11 way modular switch, modular plate, suitable GI box and earthing the point with POINT 16 ₹ 1,803.00 ₹ 28,848.00
1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as
Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit
along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core
cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
5 1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed
medium class PVC conduit as required.
Supplying and fixing following modular switch/ socket on the existing modular
6 1.24 plate & switch box including connections but excluding modular plate etc. as
Supplying and fixing following size/ modules, Gl box along with modular base
7 1.27 and cover plate for modular switches in recess etc as required.
Supplying and fixing modular blanking plate on the existing modular plate &
8 1.26 EACH 50 ₹ 47.00 ₹ 2,350.00 Digitally signed by PRIYA
switch box excluding modular plate as required. KUMARI
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supplying and fixing suitable size GI box with rnodular plate and cover in front
on surface or in recess, including providing and fixing 2 nos. 5 pin 5/6 amps
modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as
Supplying and fixing suitable size GI box with modular plate and cover in front
10 1.31 on surface or in recess, including providing and fixing 3 pin 5/6 A modular EACH 110 ₹ 545.00 ₹ 59,950.00
socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front
on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A
modular socket outlet and 15/16 A modular switch, connections etc. as
Supplying & fixing suitable size GI box with modular plate and cover in front on
surface or in recess including providing and fixing 25 A modular socket outlet
and 25 A modular SP MCB, "C" curve including connections, painting etc. as
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with
2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP
13 2.18 MCB, in sheet steel enclosure, on surface or in recess, with chained metal EACH 8 ₹ 1,806.00 ₹ 14,448.00
cover for the socket outlet and complete with connections, testing and
commissioning etc. as required.
TOTAL OF SUBHEAD 1 ₹ 30,47,853.00 ₹ 0.00
SUBHEAD:2 - LIGHT FITTINGS , FANS
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden
block including connections etc. as required.
Supplying and fixing brass batten/ angle holder including connection etc. as
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete
Supplying and fixing of following types lamp in the existing electrical fitting/
fixtures etc. as required.
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
LED Down lighter (SMD Type) (System lumen
efficacy ≥ 105 < 120 lm/Watt )
Supplying, Installation, Testing & Commissioning of LED Recessed/ surface
Down lighter (Round/ square/ Rectangular) SMD type of following body material
with PMMA and prismatic diffuser and construction as per IS : 10322 with driver
as per the requirement with Driver efficiency >85%, Operating voltage AC 140-
270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal
surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.
F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker
should be below 5%), life time (LED, Driver & electrical circuitry), of minimum
50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT
3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard
Deviation Colour Matching) <3, Maximum power consumption should not more
5 8.1 than the specified rating and Fixture shall be confirming to relevant BIS
standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen
printing on housing Complete in all respect i/c external connections with 1.5
sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and
earthing etc. as required with Minimum 5 year OEM warranty. System lumen
efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all
testing required for LED fixtures as per BIS shall be submitted. Shape size and
CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal
management: heat sink of aluminium housing such that LED junction
temperature shall not rise above 90°C)
Powder coated die cast /Extruded aluminium Body including trim
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
LED Panel light 2x2 ft. (System lumen efficacy ≥105
Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of
following body material and construction as per IS : 10322 with driver as per the
requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,
frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge
protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P.
F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker
should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum
50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per
LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K
/6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3,
Maximum power consumption should not more than the specified rating and
6 8.6 Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name
Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c
external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper
conductor single core cable and earthing etc. as required with Minimum 5 year
OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 &
LM80 Test report and all testing required for LED fixtures as per BIS shall be
submitted. Shape size and CCT shall be as approved by Engineer-in-Charge
as per requirement. (Thermal management: heat sink of aluminium housing
such that LED junction temperature shall not rise above 90°C).
Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
LED Batten light (System lumen efficacy ≥105 <120
Supplying, Installation, Testing & Commissioning of LED surface mounted
Batten light of following body material and construction as per IS : 10322 with
driver (Replaceable) as per the requirement with Driver efficiency >85%,
Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range
-5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit
protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should
be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000
Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /
4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour
Matching) <3, Maximum power consumption should not more than the specified
7 8.9 rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/
Name Engraved/ Embossing/ Screen printing on housing. complete in all
respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated
copper conductor single core cable and earthing etc. as required with Minimum
5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79
& LM80 Test report and all testing required for LED fixtures as per BIS shall be
submitted. Shape size and CCT shall be as approved by Engineer-in- Charge
as per requirement. (Thermal management: heat sink of aluminium housing
such that LED junction temperature shall not rise above 90°C).
Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
Supply and installation of Splendid Blue / Ivy / Matt Gold / Matt White, having
crstalline and metal body pendent light ncluding E27 bulbsof 9 watt, making
connection, testing, commissioning etc as required
Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the
bracket, making connection, testing, commissioning etc as required.
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less
Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium
alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,
copper winding, steel/Al body Power Factor not less than 0.9, Service Value
(CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD
(Total Harmonic Distortion) less than 10%, suitable for operation with regulator
8 9.2 for speed control and all remaining accessories including safety pin, nut bolts,
washers, temperature rise=75 0C (max.), insulation resistance more than 2
mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan
compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm
FRLS/HFFR, PVC insulated copper conductor single core cable and earthing
etc. as required.
1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
Supply and installation of following sweep/ sizes metallic blade, heavy duty,
single phase, 230 V A.C. Exhaust Fan in existing opening including making
good the damage, connection, testing and commissioning etc as required.
SUBHEAD :3 MCB, DBs
Supplying and fixing following way, horizontal type three pole and neutral, sheet
steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned
1 2.4 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB
DB complete with connections, testing and commissioning etc. as required.
2.2 2.10.5 Triple Pole and Neutral EACH 4 ₹ 1,301.00 ₹ 5,204.00
Supplying and fixing following rating, four pole, 415 V, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as
Supplying and fixing single pole blanking plate in the existing MCB DB
complete etc. as required Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supplying and fixing following rating, double pole, (single phase and neutral),
240 volts, residual current circuit breaker (RCCB), having a sensitivity current
30 mA in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
TOTAL OF SUBHEAD 3 ₹ 3,54,616.00 ₹ 0.00
SUBHEAD :4 CABLE TRAYS
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray (Galvanisation thickness not less than 50 microns) with perforation
1 not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.
1.1 4.6.7 600 mm width X 50 mm depth X 2.0 mm thickness METRE 500 ₹ 1,925.00 ₹ 9,62,500.00
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "bends" (galvanisation not less than 50 microns) with perforation not
2 more than 17.5%, in convenient sections, joined with connectors, suspended
from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
2.1 4.7.7 600 mm width X 50 mm depth X 2.0 mm thickness EACH 50 ₹ 3,985.00 ₹ 1,99,250.00
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "Tees" (galvanisation not less than 50 microns) with perforation not
3 more than 17.5%, in convenient sections, joined with connectors, suspended
from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
3.1 4.8.4 300 mm width X 50 mm depth X 1.5 mm thickness EACH 50 ₹ 2,294.00 ₹ 1,14,700.00
TOTAL OF SUBHEAD 4 ₹ 12,76,450.00 ₹ 0.00
SUBHEAD :5 EARTHING & LIGHTING PROTECTION
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories,
1 5.2 and providing masonry enclosure with cover plate having locking arrangement EACH 4 ₹ 7,658.00 ₹ 30,632.00
and watering pipe etc. with charcoal/ coke and salt as required.
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonary enclosure with cover plate having locking
arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke
and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as
strip earth electrode, including connection/ terminating with G.I. nut, bolt,
3 5.9 spring, washer etc. as required. (Jointing shall be done by overlapping and with METRE 175 ₹ 160.00 ₹ 28,000.00
2 sets of G.I. nut bolt & spring washer spaced at 50mm).
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
4 5.15 METRE 200 ₹ 287.00 ₹ 57,400.00 Digitally signed by PRIYA
connections etc. as required.
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long,
5 6.1 copper tube, having singte prong on top, with 85 mm dia 3 mm thick copper EACH 2 ₹ 609.00 ₹ 1,218.00
base plate including holes etc. complete as required.
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall
for lightning conductor complete as required. ( For horizontal run)
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall
for lightning conductor complete as required. ( For vertical run)
Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip,
8 6.10 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuk nuts and spring EACH 2 ₹ 140.00 ₹ 280.00
washers etc. complete as required.
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in
ground as required.
TOTAL OF SUBHEAD 5 ₹ 1,63,807.00 ₹ 0.00
SUBHEAD :6 CABLE WORKS
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
1 10.1 1.1 KV grade of following size direct in ground including excavation, sand
cushioning, protective covering and refilling the trench etc. as required.
1.1 10.1.3 Above 95 sq.mm and upto 185 sq. mm METRE 100 ₹ 497.00 ₹ 49,700.00
Laying of one number additional PVC insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of following size direct in ground in the same
trench in one tier horizontal formation including excavation and refilling the
trench etc as required, but excluding sand cushioning and protective covering.
2.1 10.4.3 Above 95 sq.mm and upto 185 sq. mm METRE 200 ₹ 204.00 ₹ 40,800.00
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of following size on wall surface as required.
3.1 10.7.1 Upto 35 sq. mm (Clamped with 25 x 3 mm MS flat clamp) METRE 25 ₹ 64.00 ₹ 1,600.00
Above 95 sq. mm and upto 185 sq.mm (Clamped with 25 x 3 mm MS flat
CABLE TERMINATION
Supplying and making end termination with brass compression gland and
DSR-25 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
11.1 aluminium conductor cable of 1.1 KV grade as required.
3.1 11.1.26 3.5c x 150 sqmm EACH 10 ₹ 798.00 ₹ 7,980.00 Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy
5 MR duty) armoured electrical power cable with aluminium conductor for working
voltage upto 1.1 KV as required.
TOTAL OF SUBHEAD 6 ₹ 27,729.00 ₹ 1,10,635.00
SUBHEAD :7 TELECOMMUNICATION
Supplying and fixing following modular switch/ socket on the existing modular
1 1.24 plate & switch box including connections but excluding modular plate etc. as
1.1 1.24.6 Telephone socket EACH 185 ₹ 168.00 ₹ 31,080.00
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc. as required
Supplying and drawing .5 mm dia FRLS pvc insulated annealed copper
conductor unarmoured telephone wire in exisitng pvc conduit
Supplying and fixing of following sizes of medium class PVC conduit along with
4 1.21 accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required
TOTAL OF SUBHEAD 7 ₹ 5,90,065.00 ₹ 0.00
SUBHEAD 8 - DATA
Supplying, Installation, Testing and commissioning of CAT6A Copper
Information Outlet (IO) with face plate of color as per site requirement, should
6 have ETL/UL verification program certificate for compliance with ANSI/TIA- EACH 200 ₹ 302.00 ₹ 60,400.00
568.2-D. All copper Cable and Components should be from same OEM to
maintain compatibility and interoperability etc. complete as required.
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG
solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum,
Horizontal (solid) Cable suitable for high speed data networking application
supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted
DSR-25 Pairs (UTP) cable with color coded insulation for easy indentification should
39.18 have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke
Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC
11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable
Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by
UL/ ETL etc. complete as required.
TOTAL OF SUBHEAD 8 ₹ 4,30,400.00 ₹ 0.00
SUBHEAD 9: UPS WITH BATTERY
Supplying, installation, Testing & Commissioning of following capacity at full
load (Unity Power Factor) at operating temperature 0 to 40 0C, Relative
humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot
swapable (allow for the replacement or addition of battery modules without
shutting down the entire system) modular Power Supply (UPS) system with
N+1 modules (N denotes total number of modules required for rated capacity).
The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes
back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of
UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in
ABS Container) and Static Bypass switch along with provision for manual
bypass, suitable isolation transformer for additional protection against neutral
faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems
offered are to be of the latest technology with Digital Control Microprocessor
DSR-25 based for reliable operation using Insulated Gate Bipolar
26.2 Transistor (IGBT)'s both for the rectifier & inverter
(3 Level) with PWM (Pulse Width Modulation). The
quality of design, manufacturing and inspection
process should confirm to the relevant Inter-national
standards such as IEC/EN/VDE. The operating
efficiency of the UPS systems shall be >96% while
operating on battery mode and delivering quality
power to the 100% non-linear loads. Current total
harmonic effect(ITHD) on the input grid shall be <
5% at 50 %load. (The required LC ( inductor (L) and
a capacitor (C)) filters shall be included in UPS
cost), extreme power factor kit to be included to limit the input power factor (PF)
to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be
kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7
Digitally signed by PRIYA
26.2.1 10KVA (Each Power module shall be < 10 KVA) EACH 1 ₹ 2,08,893.00 ₹ 2,08,893.00 KUMARI
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
26.2.2 20KVA (Each Power module shall be < 10 KVA) EACH 1 ₹ 3,41,772.00 ₹ 3,41,772.00
26.2.3 30KVA (Each Power module shall be < 10 KVA) EACH 1 ₹ 5,05,748.00 ₹ 5,05,748.00
TOTAL OF SUBHEAD 9 ₹ 10,56,413.00 ₹ 0.00
SUBHEAD 10: MV PANELS
MAIN PANEL-Suppling and fixing wall/floor mounted cubical panel board,
fabricated with 18 gauge iron sheet, suitable for panel mounted switch
1 disconnector, including bus bar chamber, insulator and painting etc as
required. (but without bus bar copper strip)
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
1.1 including drilling holes in cubicle panel, making connections, Ics=100% Icu and
Operational Voltage 690V etc. as required.
1.1.1 500A, 35 KA, TPMCCB
Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter)
1.2 including CT coil and RYB pilot indictor in the existing cubical panel board
including drilling holes in the panel board making connections etc as required.
1.3 CHANGEOVER
Providing and fixing following capacity four pole ON-load panel mounted
changeover switches inside the existing cubical panel board including drilling
holes in cubicle panel, making connections etc. as required.
Providing and fixing following capacity busbar chamber with 4 strips of suitable
1.4 size made of copper, heavy duty, complete with all accessories including
connections, earthing the body etc. as required.
1.4.1 630amps, 415 V heavy duty three phase with neutral busbar chamber
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections etc. as required.
1.5.1 63A, 16 KA, TPMCCB
1.5.2 160A, 36 KA, FPMCCB
1.5.3 200A, 16 KA, TPMCCB
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
2 THIRD FLOOR SUB-PANEL
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections etc. as required.
2.1.1 200A, 16 KA, TPMCCB
Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter)
2.2 including CT coil and RYB pilot indictor in the existing cubical panel board
including drilling holes in the panel board making connections etc as required.
Providing and fixing following capacity busbar chamber with 4 strips of suitable
2.3 size made of copper, heavy duty, complete with all accessories including
connections, earthing the body etc. as required.
2.3.1 300amps, 415 V heavy duty three phase with neutral busbar chamber
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections etc. as required.
2.4.1 63A, 16 KA, FPMCCB
Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit
breaker suitable for inductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18
gauge iron sheet, suitable for panel mounted switch disconnector, including bus
bar chamber, insulator and painting etc as required. (but without bus bar
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
3 FOURTH FLOOR SUB-PANEL
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections etc. as required.
3.1.1 200A, 16 KA, TPMCCB
Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter)
3.2 including CT coil and RYB pilot indictor in the existing cubical panel board
including drilling holes in the panel board making connections etc as required.
Providing and fixing following capacity busbar chamber with 4 strips of suitable
3.3 size made of copper, heavy duty, complete with all accessories including
connections, earthing the body etc. as required.
3.3.1 300amps, 415 V heavy duty three phase with neutral busbar chamber
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections etc. as required.
3.4.1 63A, 16 KA, FPMCCB
Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit
breaker suitable for inductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18
gauge iron sheet, suitable for panel mounted switch disconnector, including bus
bar chamber, insulator and painting etc as required. (but without bus bar
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
4 FIFTH FLOOR SUB-PANEL
Providing and fixing following rating and breaking capacity and pole MCCB with
BSR-23 thermomagnetic release and terminal spreaders in existing cubicle panel board
2.4 including drilling holes in cubicle panel, making connections etc. as required.
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter)
4.2 including CT coil and RYB pilot indictor in the existing cubical panel board
including drilling holes in the panel board making connections etc as required.
Providing and fixing following capacity busbar chamber with 4 strips of suitable
4.3 size made of copper, heavy duty, complete with all accessories including
connections, earthing the body etc. as required.
4.3.1 2.5.3 200amps, 415 V heavy duty three phase with neutral busbar chamber
Providing and fixing following rating and breaking capacity and pole MCCB with
BSR-23 thermomagnetic release and terminal spreaders in existing cubicle panel board
2.4 including drilling holes in cubicle panel, making connections etc. as required.
Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit
breaker suitable for inductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18
BSR-23 gauge iron sheet, suitable for panel mounted switch disconnector, including bus
8.11 bar chamber, insulator and painting etc as required. (but without bus bar
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
5 TERRACE FLOOR SUB-PANEL
Providing and fixing following rating and breaking capacity and pole MCCB with
BSR-23 thermomagnetic release and terminal spreaders in existing cubicle panel board
2.4 including drilling holes in cubicle panel, making connections etc. as required.
Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter)
5.2 including CT coil and RYB pilot indictor in the existing cubical panel board
including drilling holes in the panel board making connections etc as required.
Providing and fixing following capacity busbar chamber with 4 strips of suitable
5.3 size made of copper, heavy duty, complete with all accessories including
connections, earthing the body etc. as required.
5.3.1 2.5.2 100amps, 415 V heavy duty three phase with neutral busbar chamber Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit
breaker suitable for inductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18
BSR-23 gauge iron sheet, suitable for panel mounted switch disconnector, including bus
8.11 bar chamber, insulator and painting etc as required. (but without bus bar
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
Supplying, Installation, Testing & Commissioning of
Modular type Variable Refrigerant Flow/Variable
Refrigerant Volume air cooled Outdoor units suitable for
cooling/heating having 100% hermetically sealed inverter
type twin Rotary/Scroll Compressor(s),minimum two
compressors (with individual separate PCB) for above
14HP modules, microprocessor based Controller, top
discharge type condensing unit(s), with R-410-A
Refrigerant or equivalent, vibration Isolators with suitable
foundation etc. complete as required. To have better
efficiency condenser fan shall be capable to operate at
different speed with respect to load.The unit shall deliver
the rated capacity and in confirmation as per IS
18728:2024 and CPWD Specifications and work even at
50°C ambient temperature without tripping. The system
shall be able to deliver 100% of the rated capacity upto 39
°C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC
power supply and BMS compatible. The
unit shall be filled with first charge of the refrigerant and
ready for use as required. The condenser should be coated
with a hydrophilic film to prevent water accumulation on the
surface of the heat exchanger, enhance water dispersion,
and reduce the risk of degradation, thereby improving
overall performance and durability. The Indian Seasonal
Energy Efficiency Ratio (ISEER) of the unit shall be as per
Energy Conservation and Sustainable Building Code
(ECSBC) 2024 as below and complete as per CPWD
specification, connections, inter connections etc. as
Digitally signed by PRIYA
For Cooling Heating or Both KUMARI
DSR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY
MR RATE AMOUNT RATE AMOUNT
Supplying, Installation, Testing and Commissioning of
following minimum capacity and external static pressure
VRF/VRV ceiling mounted mid static ductable type Indoor
unit equipped with washable synthetic media pre-filter, fan
section with low noise fan/dynamically balanced blower,
multispeed motor, coil section with DX copper coil,
electronic expansion valve, corded remote control, outer
cabinet, vibration Isolators, drain pan, drain pump, other
necessary supports etc., suitable for operation on single
phase AC supply 230 V ± 10%, 50 Hz complete as
required. The Indoor units must shut down upon receiving
a singal from the BMS System/Fire Singnals. The cooling
capacity of indoor unit will be at air inlet conditions of 27 0C
DB and 19 0C WB temperature. (Make will be same as of
Outdoor) Mid static ductable units (minimum 30 to 48 pascal external
static pressure)
Supplying, Installation, testing and commissioning including
vaccumiazation and Nitrogen testing of following nominal
sizes of soft/hard drawn copper refrigerant piping for
VRV/VRF system, complete with fittings, with suitable
adjustable ring type hanger supports, jointing/brazing
including accessories, insulated with XPLE Class-O tubular
insulation/with Class-O closed cell elastometric nitrile
rubber tubular sleeves sections of 19 mm thick insulation
as given below for Suction and Liquid lines, all accessories
as per specifications etc. as required :
31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 260 487.00 1,26,620.00
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2
TOTAL COST FOR ELECTRICAL WORKS OF INCUBATION CENTER ₹ 1,15,99,999.00
Digitally signed by PRIYA
BOQ Of PLUMBING & SANITARY WORKS
DSR- DSR ITEMS NON-DSR ITEMS
Sr.No. Particulars Unit
2023/MR Qty Rate Amount Rate Amount
SANITORY FIXTURES-
1 17.4 Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x430x265 mm
sizes respectively with CI automatic flushing cistern with fittings, RS
or CI brackets standard size galvanized steel flush pipe and spreaders
with brass unions and GI clamps complete including painting of
cistern and fittings, cutting and making good the walls and floors
where required.
17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic
flushing cistern 12.00 Each 9,612.40 1,15,348.80
2 17.3 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I. brackets,
40 mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid 29.00 Each 8,006.60 2,32,191.40
3 17.1 Providing and fixing white vitreous china water closet squating pan
(Indian type WC pan) size 580 mm with 100 mm and sand cast iron P
or S trap, 12.5 Litre high level CI flushing cistern (of approved make)
with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic
flush pipe with fittings and clamps 20 mm GI over flow pipe with
specials and mosquito proof coupling of approved municipal design
and GI chain and pull complete including painting of cistern and
fittings, cutting and making good the walls and floors where required.
a) Long Pan patten WC Pan Each 8587.70
b) Orissa Pattern WC Pan Each 7466.60
Digitally signed by PRIYA
DSR- DSR ITEMS NON-DSR ITEMS
Sr.No. Particulars Unit
2023/MR Qty Rate Amount Rate Amount
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm
17.1.1 with integral type foot rests 16.00 Each 6,767.40 1,08,278.40
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
4 wherever require:
17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15
mm C.P. brass pillar taps 10.00 Each 2,648.85 26,488.50
Providing and fixing CP Brass Single lever telephonic wall mixer of
quality & make as pproved by Engineer in charge.Tap mixture - for all
5 17.22B bathroom
a 15 mm nominal dia 16.00 Each 6,940.75 1,11,052.00
Providing and fixing SS towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fitting
arrangement of approved quality and colour.450mm long towel rail
6 with length of 495mm, 78mm wide and effective height of 88mm, 16.00 Each 1,673.40 26,774.40
7 17.34 weighing
andless thantoilet
fixing 170 paper
8 MR SS health Faucets of 1 meter length with bidet sprayers 16.00 Each 1,800.00 28,800.00
Providing and fixing SS liquid soap container 109 mm wide, 125mm
MR high and 112mm distance from wall of standard shape with bracket of 16.00 Each 355.50 5,688.00
the same materials with snap fittings of approved quality colour and
9 make, weighing not less than 105gms.
Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded
off supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
10 plugs etc. complete
Providing and fixing 600 x 450 mm bevelled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
Digitally signed by PRIYA
DSR- DSR ITEMS NON-DSR ITEMS
Sr.No. Particulars Unit
2023/MR Qty Rate Amount Rate Amount
18.84 Providing & Fixing chrome plated brass battery based infrared sensor
12 operated pillar cock, having foam flow technology.
15mm nominal bore 18.00 Each 8,803.70 1,58,466.60
18.50 Providing and fixing C.P. brass long nose bib cock of approved quality
13 conforming to IS stamdards and weighing notless than 810 gms.
Multiply GST Factor(.973) 8,03,409.16
Digitally signed by PRIYA
BOQ OF INTERIOR ITEMS
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
INTERIOR DESIGN, PANELLING-
1.00 MR Supply & installation of acoustic melamine panels made of pinewood
E1 grade fiberboard, with slotted perforations, melamine laminated
finish, flame retardant grade, size 1200/600x600x16mm, tongue and
groove edge, volume density of base board 800Kg/m3, weight
9.3Kgs/m2(6R16),10.4Kgs/m2 (6R32), 10.3Kgs/m2(G5R16)
installed by using Strut framework system.Sqm 193.22 9,265.00
17,90,183.30 Strut framework system includes Strut
aluminium core cross channel having thickness 0.55mm, length
3600mm,knurled web 40mm, depth 10mm and equal flanges 15mm
is fastened to wall or framework behind vertically/ horizontally at
every 600mm c/c. strut aluminium core cross channel, thickness
0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and
flanges of 7mm with suitable edge ¢re brackets is then fixed
perpendicular to the Strut with the help of fasteners at every 300mm
centers. Acoustic melamine panels of size 600x600x16mm in then
fixed perpendicular to with suitable edge & centre brackets.
Contractor to provide expansion joints of 3mm at every 4.8m
bothways.Panels are backlined
Technical Parameters 1082.75 SQM 9,265.00 1,00,31,678.75
• Fire (Class) – 1 & P (For FR grade)
• Acoustics – NRC upto 0.85
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 40, 70
• Light reflectance (%) – Colour Dependant
• Green (VOC, RC %) – Low, 25
Acoustic Panel of Approved Shade and design as per Enginer In
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
2.00 MR Supply & installation of acoustical melamine finish wooden
perforated board made of pinewood E1 grade fiberboard, with big
circular perforations of 50mm dia, melamine laminated finish, Flame
retardant grade, size 600x1200x16mm, Square edge, volume density
of base board 800Kg/m3, weight 8.8Kgs/m2 installed by using Strut
framework system and Z bar. Sqm 429.15 9,268.00 39,77,362.20
Strut framework system includes Strut having thickness 0.55mm,
length 3600mm, knurled web 35, depth 20mm and equal flanges
15mm is fastened to wall positioned vertically in a regular manner at
600mm c/c. Z-bar having 40mm height, thickness 1mm is first fixed
behind the panels by using suitable fasteners. Another length of Z-
bar are then installed over Strut horizontally at spacing so as to
match with Z-bar at rear of acoustical melamine finish wooden
perforation panels. Acoustical melamine finish wooden perforation
panels of size 600x1200x16mm are then slided into the Z-bar fixed
on Strut. Long edges of panels should be perpendicular to Z-bar and
Short edges of the panel are staggered.
Panels are backlined with polyfiber 10x25 held in position with dab
spots of approved adhesive
Technical Parameters
• Fire (Class) – 1 & P (For FR grade)
• Acoustics – NRC upto 0.85
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 40, 70
• Light reflectance (%) – Colour Dependant
• Green (VOC, RC %) – Low, 25
Wooden Panelling with miniral wool pachaging at the back 115.10 Cum 9,268.00 10,66,746.80
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
3.00 MR Providing and fixing movable/removable floor rolling partiition of 80.00 SQM 7,250.00 5,80,000.00
thickness 80 mm minimum having finished with hardwood vanner or
melamine finish and capable to fold at both ends comprises of
Section width Min 400 mm / Max 1,000 mm
Weight/m2 26-42 kg depending on the requirements for noise
reduction (incl rails and mounting kits)
Height Max 3,000 mm
olour/surface finish As per requirement
Noise reduction Rw 41-52 dB
The partitions lock and open by
a conveniently placed handle.
The floor rolling partition can run on
central or eccentric mountings in floor rails of aluminium
mounted on the floor. The rail is 93mm wide and only
projects 5mm above the floor. The frame should be aluminum.
4.00 MR Providing and laying Absolute Micro-Fibre Acoustical Tile (Mat-
Black) including all acesseries in comlete as per dierction of Enineer
Size of Tile 600x600 mm
NRC Range: 0.55–0.80 (with acoustic backing)
Thickness: 15mm
Fire Rating: Class A / Class 1 (BS 476) — suitable for public-
assembly spaces
Moisture Resistance: High — rated for humid environments
including swimming pools
Thermal Insulation: TR ≥ 0.39 (m²·K/W)
Mould & Fungi Resistance: Yes — no mould growth even in high-
humidity conditions
Absolute Micro-Fibre Acoustical Tile (Mat-Black) 345.60 Sqm 1,380.00 4,76,928.00
Partition Board -
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
5 21.2 12mm thick one side Pre- Laminated particle board (decorative
lamination on one side and other sides balancing lamination) grade-
1, medium density flat pressed, three layer particle board FPT-1 or
graded wood particle board FPT-1 confirming to IS : 3087 bonded
with BWP type synthetic resin adhesive as per IS : 848 and pre-
laminated confirming to IS : 12823, Grade - 1, Type II marked.
21.2.1 Pre-laminated particle board with decorative lamination on 1,64,059.20
one side and balancing lamination on other side 144.00 Sqm 1,139.30
6.0 14.5 Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty
14.5.1 Float glass panes of nominal thickness 4 mm (weight not less 100.00 Sqm 1,090.65 1,09,065.00
7.00 26.22 Providing and fixing false ceiling at all heights with integral
densified calcium silicate reinforced with fibre and natural filler false
ceiling tiles of Size 595x595 mm of approved texture, design and
patterns as per CPWD Specification 2019, to be laid in true
horizontal level suspended on inter- locking metal T-Grid of hot
dipped galvanised iron section of 0.33 mm thick (galvanized @ 120
grams per sqm including both sides)comprising of main-T runners of
size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of
length 1200 mm and secondaryintermediate cross-T of size 24x32
mm of length 600 mm to formgrid module of size 600 x 600 mm,
suspended from ceiling using galvanised mild steel items
(galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash
fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length
and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid
and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both
25 mm flange to pierce into 12x50 mm or even bigger size dash
fastener if require, fixed with Glavanised iron perimeter wall angle or
size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall
/ partition with the help of plastic rawl plugs at 450 mm center to
center and 40 mm long dry wall S.S screws. The work shall be
carried out as per specifications, drawing and as per directionsof the
Engineer-in-Charge.
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
26.22.2 With 15 mm thick tegular/butt edged without perforation
plain/designer light weight calcium silicate Anti-Microbial Bio-Safe
coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21
Glass Panelling-
8.00 25.3 Providing, assembling and supplying vision glass panels (IGUs)
comprising of hermetically-sealed 6-12- 6 mm insulated glass
(double glazed) vision panel units of size and shape as required and
specified, comprising of an outer heat strengthened float glass 6 mm
thick, of approved colour and shade with reflective soft coating on
surface # 2 of approved colour and shade, an inner Heat strengthned
clear float glass 6 mm thick, spacer tube 12 mm wide, dessicants,
Glass Panel Openable Area-
9.00 25.4 Extra for openable side / top hung vision glass panels (IGUs)
including providing and supplying at site all accessories and
hardwares for the openable panels as specified and of the approved
make such as heavy duty stainless steel friction hinges, min 4 -point
cremone locking sets with stainless steel plates, handles, buffers etc.
including necessary stainless steel screws/ fasteners, nuts, bolts,
washers etc. all complete as per the Architectural drawings, as per
the approved shop drawings, as specified and as directed by the
Engineer- in-Charge.
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
10.00 MR Providing and fixing 450 mm deep pantry cabinet above counter
wooden cupboards shutters with teak wood shutter 20mm thick
shutter fixed to cabinet by means of necessary brass fittings such as
hinges tower bolt ball catcher handle etc. complete including 19 mm
thick vertical/ horizontal partitions of commercial ply board with
drawer unit with guide rail including locking arrangement and knobs
heavy duty SS hanger rail ext. painting of wooden members with two
or more coats of synthetic enamel paint of approved make in the
inner side and shade over over a coat of primer complete and
melamine polish on the outer surface as per Architect's design and
drawings. Note: Size of the individual cabinets/drawers may be even
upto 30cmX15cm.
Rack & Cabinet (Wood Work) 361.52 Sqm 3,889.00 14,05,950.00
Poly Carbonate sheet
Providing and fixing in 5-wall and 16 mm thick polycarbonate
transparent sheet complying IS-14443 over required Truss(Will be
paid separately) position as per manufacturer’s specification and
direction of Engineer- in-Charge all complete.
26.24.1 16 MM thick Polycarbonate Sheet 113.00 Sqm 3,117.60 3,52,288.80
12.00 26.88 Providing and fixing factory made single extruded WPC Providing
and fixing factory made single extruded WPC (Wood Polymer
Composite) solid decorative type flush door shutter of required size
comprising of virgin polymer of K value 58-60 (Suspension Grade),
calcium carbonate and natural fibers (wood powder/ rice husk/wheat
husk) and non toxic additives (maximum toxicity index of 12 for 100
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
26.86 Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Clerestory windows & other
Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-
60 (Suspension Grade), calcium carbonate and natural fibers (wood
powder/ rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) fabricated with miter joints after
applying PVC solvent cement and screwed with full body threaded
star headed SS screws having minimum frame density of 750
kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N
(Edge), minimum compressive strength of 58 N/mm2, modulusof
elasticity 900 N/mm2 and resistance to spread of flame of Class
Acategory with property of being termite/borer proof, water/moisture
proof and fire retardant and fixed in position with M.S hold
fast/lugs/SSdash fasteners of required dia and length complete as per
direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash
fasteners shall bepaid for separately)
Note: For WPC solid door/window frames, minus 5 mm tolerance in
dimensions i.e depth and width of profile shall be acceptable.
Variation inprofile dimensions on plus side shall be acceptable but
no extra paymenton this account shall be made
26.86.4 Frame size 50 x 125 mm
13.00 12.51 Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top
coat 15-18 microns using self drilling/ self tapping screws
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
Providing and fixing factory made uPVC glazed/wire mesh windows/
doors comprising of lead free uPVC multi-chambered frame, sash
and mullion/coupler (where ever required) extruded profiles having
minimum wall thickness of 1.70 mm for Series R1 and R2 profiles
and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608
in any shape, colour and design duly reinforced with galvanized mild
steel section made of required shape & size as per CPWD
Specification, uPVC extruded glazing beads, interlocks and Inline
sash adaptor (where
ever required) of appropriate dimension, EPDM gasket, hardware,
SS304 grade fasteners of minimum 8 mm dia with countersunk head,
comprising of matching polyamide PA6 grade sleeve for fixing frame
to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic
caps and necessary stainless steel screws etc. Profile of frame, sash &
14.00 9.147 mullion (if required) shall be mitred cut and fusion
welded/mechanically jointed duly sealed at all corners, including
drilling of holes for fixing hardware and drainage of water etc. After
fixing frame the gap between frame and adjacent finished wall shall
be filled with weather proof silicon sealant over backer rod of
approved size and quality, all complete as per approved drawing
conforming to CPWD specification & direction ofEngineer-in-
Charge. Section of steel reinforcement and cross sections of uPVC
profiles to be as per design approved by Engineer-in-Charge. Wire
mesh / Glazing of plain/ toughened/ laminated/ double glass unit with
/ without high performance coatings as per design requirements and
conforming to IS: 3548 & IS: 16231 shall be paid separately.Note:-
Structural design proof checked from a Government Engineering
Institute, to be provided by the manufacturer for :
(i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3
twostructure heightwindow
panels sliding more than 20m
with for all wind
Aluminium speeds
9.147.A1 roller track, wool pile, nylon rollers with SS 304 body.
Using R2 series with frame (40 mm & above) x (40 mm & above) &
9.147.A1.1 sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak)
powder coated touch locks with hook (Height
Digitally signed by PRIYA
DSR ITEMS NON-SOR ITEMS
S. No. DSR-23/MR Particulars Qty Unit
Rate Amount Rate Amount
Multiply GST Factor 87,34,427.29
GRAND TOTAL(DSR+NDSR) 2,22,95,730.84
GRAND TOTAL(DSR+NDSR) 2,22,95,730.84
Digitally signed by PRIYA
BOQ OF FURNITURE & ITEMS
Sr.No. Particulars Qty Unit Rate Amount
1.00 MR Providing and placing Meeting/ Conference tables :
Worktop: Worktop shall be made out of 25mm thick BW
grade BB/E1 grade MDF/Particle Board cover with
laminate and all the edges of worktop shall be provided
with machine pressed 1.5-2 mm thick ABS edge banding
glued with hot melt EVA glue. E1/good grade laminate
Wire zero urea formaldehyde
management: emissions
Access Flap (<or= 8mg/100 g
Mounting Tray is provided in the table. It is Made
from Matt silver Anodized Aluminium extrusion and
plastic moulded components to facilitate access of
Electrical/Data/Voice sockets
16 Pax Rect Meeting table access
4200W from Top. Powder
2.00 Providing and supplying the Following
MR Chair having Medium Back Chair, PU Adjustable
Adjustable Lumbar Support,
Synchro Tilt Mechanism with Inbuilt Seat Slider,
Nylon Base with 60mm Castor wheel,
3.00 MR 8 seater
Net Backoffice Table
and Seat madeTapestry,
Fabric with modular Panel Based
Particle Board Edge Banded Top,
4.00 MR 6 seater office Table made with modular Panel Based
Particle Board Edge Banded Top,
5.00 MR Teak Wood shade laminated Rectangular Office
Wooden Table, With Storage having 2 Drawer
Storage, table dimension W1800 X D2000 X H750,
Particle Board Table top material, Enginnered Wood 1.00 Each 98,000.00 98000.00
Digitally signed by PRIYA
Sr.No. Particulars Qty Unit Rate Amount
6.00 MR 12 seater conference Table having 45 mm MDF
Top,Veneer with PU Polish,SS 304 Gold PlatedBase,
7.00 MR Reception table -Technology
Machine-cut Edges, CNC Processed
Ergonomic Front Panel with Step Counter 1.00 Each 35,000.00 35000.00
8.00 MR 30+ seater conference table 1.00 Each 98,567.00 98567.00
MR long table 1.00 Each 12,000.00 12000.00
Audience Seating Chair -
9.00 MR Providing and supplying visitor chair with ergonomic
design, user comfort & aesthetically appealing. The seat
and back shall be made of 15mm thick hot pressed
Supplying plywood
and placingpadded withThe
Cafe Chair. highseat
10.00 MR moulded
be made ofpolyurethane foam 50mm thick
perforated polypropylene having
shell. density
back shall be fixed with metal frame. The frame structure
shall be supported by four legs made up of MS CRCA
chrome plated tubular pipe of size 30mm X 15mm with
11.00 MR Supplying and placing twoo Leged of MS stell-
80X80X3mm Café Table of Size W-1200 MMx Lenth-1200
Base MaterialHeavy-Duty Mild Steel (MS) of size
900mmX600mmX3mm
Top Material-Commercial-Grade Top of white color
Supplying and placing ergonomically designed,
12.00 MR comfortable & aesthetically appealing High back chair.
The seat and back shall be made of 18mm and 15mm
thick hot pressed commercial plywood padded with HR
polyurethane foam 40mm thick having density 40kg/m³
Digitally signed by PRIYA
Sr.No. Particulars Qty Unit Rate Amount
13.00 MR Supplying & placing center table with an overall size
600mm X 600mm X 450mm. The top of the table shall be
made up of 18mm thick Pre-laminated particle board of
grade II of IS 12823. The top profile shall be in square
shape and the edges shall be sealed with 2mm thick thin Each
14.00 MR Supplying and placing a two seater sofa that shall be
constructed from natural hard wood and commercial
plywood having inner frame. The thickness of the wood
should allow for the heavy tension webbing. The sofa
shall have spring seating
also be padded separately. 3.00 Each 42,028.00 126084.00
DIGITAL SCREEN-
15.00 MR SITC of Projector including stand/ wall
bracket/ ceiling mounting brackets as per
site requirement/ instruction of Engineer/
DFCCIL. 6000 ISO Lumens, WUXGA resolution,
Laser light source, Single Chip DLP Projector - 6000 ISO
Lumens, WUXGA resolution, Laser light source, Single
Chip DLP projector with HDMI 1.4a X 2, HDMI
1.4a+ MHL x 1, VGA IN X 1, 3D Sync Out x 1, Audio IN 3.5
mm jack x 1, Audio in Phono X 2, Audio Out x 1, USB Type
A X1, RS232 X 1, LAN X 1, HD Base-T X 1, Standard Zoom
lens, 20,000,00 :1 Dynamic
Contrast ratio, 20,000 hours light source life.
Projector/ Digital Screen
Capsule Lift- 6 Person (Passenger Elevator)
16.00 MR Supply, Installation, Testing and Commissioning of
Passenger Elevator
Providing, Installation, Testing and Commissioning of
Otis/Kone/Tyssenkrupp make Electric Traction
Passenger Elevator of 6 person (408 Kgs) capacity
Elevators, travelling from ground floor to 3rd floora Digitally signed by PRIYA
Sr.No. Particulars Qty Unit Rate Amount
Capsule Shape Glass Hydraullic Lift FOR 3 LEVEL 1.00 Each 3000000.00 3000000.00
Digitally signed by PRIYA
COST ESTIMATE FOR CONSTRUCTION OF HAAL ARYABHATT UNIVERSITY ,PATNA
START- UP INCUBATION CENTRE AND CENTRE FOR PUBLIC POLICY (AUDITORIUM AT CIMP)
BILL OF QUANTITY
DSR ITEMS NON-DSR ITEMS
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
steel work in built up tubuler ( Round,squre,or rectangularhillow tubesetc)
10.16.1 including cutting hoisting,fixing in position and applying apriming coat of KG 8551.08 194.40 16,62,328.98
approved ateef primer all complete.
10.7 Float Glass panes
9.7.7.2 4mm thick glass pane (weight not less than 10 kg/sdm) SQM 40.00 2,241.80 89,672.00
Glass Panel Openable Area-
25.40 Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the openable
panels as specified and of the approved make such as heavy duty stainless
steel friction hinges, min 4 -point cremone locking sets with stainless steel
plates, handles, buffers etc. including necessary stainless steel screws/
fasteners, nuts, bolts, washers etc. all complete as per the Architectural
drawings, as per the approved shop drawings, as specified and as directed by
the Engineer- in-Charge.
Window side opening SQM 80.00 3,671.50 2,93,720.00
Chair having Medium Back Chair, PU Adjustable Arm(2D), Adjustable Lumbar
Support, Synchro Tilt Mechanism with Inbuilt Seat Slider, Gas Lift, Nylon Base
with suitable aarangement for fixing to floor, Net Back and Seat Fabric Tapestry, 185.00 Each 7,500.00 13,87,500.00
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Supplying & placing center table with an overall size 600mm X 600mm X
450mm. The top of the table shall be made up of 25mm thick Pre-laminated
particle board of grade II of IS 12823. The top profile shall be in square shape
and the edges shall be sealed with 2mm thick thin strip of impermeable PVC
that is cut to fit the size of board panel and duly pasted with the assistance of
edge banding machine at 200 degree Celsius. The top shall be supported on
MS powder coated rectangle pipe frame with cross-section area 40mm X
20mm. The under structure shall have MS powder coated four legs with Dia.
38mm at upper and 28mm at lower. There shall be PPCP shoe provided at the
MR bottom to avoid scratches on the floor. The manufacturer shall have quality
and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-
18001:2007, BIFMA membership and AIOTA certification. The board used
should meet International Standard of quality, Indian standard IS 12823 grade
II should meet long time load bending, screw-withdrawal strength, modulus of
rupture and modulus of elasticity bending tested as per IS 2380.
Rectangular Table
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Supplying and placing a two seater sofa that shall be constructed from natural
hard wood and commercial plywood having inner frame. The thickness of the
wood should allow for the heavy tension webbing. The sofa shall have spring
attached and also be padded separately. The frame shall be padded with high
resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in
back. There shall be cushion arm provided padded with high resilience
polyurethane foam having density 32Kg/m³. A SS strip shall be provided on
MR front of the arm having cross-section area 14mm X 4mm. The understructure
shall have shiny chrome finish SS leg with height 100mm and 10mm thick.
There shall be shoe provided at the bottom to avoid scratches on the floor.
The seat size shall be 500±10 mm(D) X 1480±10 mm(W), seat height =
430±10 mm, overall width = 1625±10 mm, overall depth = 750±10 mm &
overall height = 700±10 mm.
Digital Screen-
SITC of Projector including stand/ wall bracket/ ceiling mounting brackets as per site
MR requirement/ instruction of Engineer/ DFCCIL. 6000 ISO Lumens, WUXGA resolution,
Laser light source, Single Chip DLP Projector - 6000 ISO Lumens, WUXGA resolution,
Laser light source, Single Chip DLP projector with HDMI 1.4a X 2, HDMI
1.4a+ MHL x 1, VGA IN X 1, 3D Sync Out x 1, Audio IN 3.5 mm jack x 1, Audio in Phono X
2, Audio Out x 1, USB Type A X1, RS232 X 1, LAN X 1, HD Base-T X 1, Standard Zoom
lens, 20,000,00 :1 Dynamic
Contrast ratio, 20,000 hours light source life.
Projector/Digital Screen 1.00 Each 2,65,403.00 2,65,403.00
Providing and fixing 12 mm thick frameless toughened glass door shutter of
approved brand and manufacture, including providing and fixing top & bottom
21.18 pivot & double acting hydraulic floor spring type fixing arrangement and making
necessary holes etc. for fixing required door fittings, all complete as per direction
of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
Toilet Renovation PP Block
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
17.3 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40
mm flush bend, overflow arrangement with specials of standard make
and mosquito proof coupling of approved municipal design complete,
including painting of fittings and brackets, cutting and making good the
walls and floorswherever required
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 6.00 8,006.60 48,039.60
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillartaps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require
17.7.1 White Vitreous China Wash basin size 630x450 mm with a
pair of 15 mm C.P. brass pillar taps Each 2,648.85 15,893.10
17.4 Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x410x265 mm
sizes respectively with automatic flushing cistern with standard flush
pipe and C.P. brass spreaders with brass unions and G.I clamps Each 5.00 1,648.95 8,244.75
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required
17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic
flushing cistern Each 9,612.40 28,837.20
18.50 Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore Each 6.00 820.70 4,924.20
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
18.53.1 15 mm nominal bore Each 11.00 574.30 6,317.30 Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
11.4 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300
mm or more (thickness to be specified by the manufacturer), of 1st
quality conforming to IS : 15622, of approved make, in all colours,
shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm
thick Cement 82.00
Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry
@ 3.3 kg/ sqm including pointing the joints with white cement and
pigments etc., complete Sqm 1,439.40 1,18,030.80
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge, in skirting, risers of steps and
dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse 400.00
sand) and jointing with grey cement slurry @ 3.3kg per sqm, including
pointing in white cement mixed with pigment of matching shade
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60
(SuspensionGrade), calcium carbonate and natural fibers (wood
powder/ rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) fabricated with miter joints after
applying PVC solvent cement and screwed with full body threaded star
headed SS screws having minimum frame density of 750 kg/cum, screw
withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum
compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2
and resistance to spread of flame of Class A category with property of
being termite/borer proof, water/moisture proof and fire retardant and
fixed in position with M.S hold fast/lugs/SS dash fasteners of required
dia and length complete as per direction of Engineer-In- Charge. (M.S
hold fast/lugs or SS dash fasteners shall be paid for separately).
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
26.87 Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid plain flush door shutter of required size comprising of
virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate
and natural fibers (wood powder/ rice husk/wheat husk) and non toxic
additives (maximum toxicity index of 12 for 100 gms) having minimum
density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)
& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of
elasticity 850 N/mm2 and resistance to spread of flame of Class A
category with property of being termite/borer proof, water/moisture
proof and fire retardant and fixing with stainless steel butt hinges of
required size with necessary full body threaded star headed counter
sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:
stainless steel butt hinges and necessary S.S screws shall be paid
12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)
Single socketed pipes.
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming to
IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion.
12.42.1 Coupler
12.42.4 Single tee without door Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Multiply GST Factor(.973) 64,54,928.89
Digitally signed by PRIYA
Name of Work: RENOVATION & INTERIOR WORK OF CENTRE FOR PUBLIC POLICY AT CIMP
SUMMARY OF COST-CLASSROOM
Sl No. Sub - Head Amount Remarks
1 CIVIL WORKS 28,14,504.18
2 ELECTRICAL WORKS 28,21,171.00
3 PLUMBING & SANITARY WORKS 3,73,364.82
4 INTERIOR WORKS 35,38,867.63
5 FURNITURE & AUDIO VSUAL WORKS 10,47,302.00
Digitally signed by PRIYA
BOQ OF CIVIL WORK
RENOVATION & INTERIOR WORK IN CLASSROOM BUILDING At CIMP
DSR2023 Description of Items Qty Unit Rate Amount
A. CIVIL WORKS - SCHEDULE ITEMS
DISMANTLING & DEMOLISHING WORK
Demolishing brick work manually/ by mechanical means including stacking
1 15.7 of serviceable material and disposal of unserviceable material within 50
metres lead. As per direction of Engineer-in-charge.
15.7.4 In Cement Mortar
Demolishing brick work manually/ by mechanical means including stacking
2 15.2 of serviceable material and disposal of unserviceable material within 50
15.2.2 Nominal concrete 1:4:8 or leaner mix (including equvivalent design mix)
4 15.6 Extra for cutting reinforcement bars in RCC or RB work.
Dismantling the tile work in floors and roofs laid in cement including stacking
of materials within 50 m lead.
15.23.1 For thickness of tiles 10 mm to 25 mm
Disposal of building rubbish / malba / similar unserviceable, dismantled or
waste materials by mechanical means, including loading, transporting,
8 15.60 unloading to approved municipal dumping ground or as approved by
Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts
involved. Digitally signed by PRIYA
DSR2023 Description of Items Qty Unit Rate Amount
Old walls structure-
All dispose material-
Earth work in excavation by mechanical means (Hydraullic excavator)/
manual means over areas ( exceeding 30 cm in depth. 1.5 m in width as well es
10 sqm on plan) including getting out and disposal of excavated earth , lead
upto 50 m and lift upto 1.5 m; as directed by Engineer -in-charge.
2.7.1 All Kind of Soil 11 Cum 498.90 5,487.90
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
2 2.38 foundations etc. in layers not exceeding 20cm in depth : consolidating each 11 Cum 308.20 3,390.00
deposited layer by ramming and watering lead.
Supplying and filling in plinth with local sand and under floors including,
watering, ramming consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding
the cost of centering and shuttering - All work upto plinth level.
1:3:6 (1 Cement :3 coarse sand (zone-III) derived from natural sources :4
graded stone aggregate 40mm nominal size derived from natural sources)
Centring and shuttering including strutting, propping etc and removal of
form work for :
Digitally signed by PRIYA
DSR2023 Description of Items Qty Unit Rate Amount
4.3.1 a) Foundation, footings, bases of columns etc. and mass concrete. 4.32 Sqm 392.15 1,694.09
Providing and laying in position specified grade of reinforced cemnet
5.1 concrete, excluding the cost centering, shuttering, finishing and reinforcement-
All work up to plinth level:
1:3:6 (1 Cement :3 coarse sand (zone-III) derived from natural sources :4
graded stone aggregate 40mm nominal size derived from natural sources)
Steel Reinforcement for RCC work including straightening. Cutting, bending,
placing in position and binding all complete. Above plinth level.
5.22.1 Mild steel and Medium Tensile steel bars
Brick work with common burnt clay F.P.S (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 Cement : 6 Coarse sand)
PLASTERING WORKS -
11 13.1 12 mm cement plaster mix 1 : 4 (1 cement : 4 fine sand).
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single
or half brick wall mix.
OUTER PLASTER- Digitally signed by PRIYA
DSR2023 Description of Items Qty Unit Rate Amount
Providing and applying white cement based putty of average thickness 1mm,
23 13.80 of approved brand and manufacturer, over the plastered wall surface to Sqm 156.05 1,43,328.80
prepare the surface even and smooth complete.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC
(Volatile Organic Compound ) content less than 50 gram/ litre, of approved
24 13.81 brand and manufacturer including applying additional coats wherever Sqm 62.70 9,881.52
required to achieve even shade and colour.
13.81.1 Old work (one or more coats)
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
25 13.82 manufacture, including applying additional coats wherever required, to Sqm 137.45 1,26,245.08
achieve even shade and colour.
13.82.2 Two coats
Wall painting with premium acrylic emulsion paint of interior grade, having
VOC (Volatile Organic Compound ) content less than 50 grams/ litre of
28 13.83 approved brand and manufacture, including applying additional coats 968.87997 Sqm 142.80 1,38,356.06
wherever required to achieve even shade and colour.
13.83.2 Two coats
Digitally signed by PRIYA
DSR2023 Description of Items Qty Unit Rate Amount
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS : 15622, of approved make, in all colours and shades, laid on
20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey
cement slurry @3.3 kg/sqm including grouting the joints with white
cement and matching pigments etc.complete
11.41.4 Size of tile 1000x1000mm
Size of Tile 600 x 600 mm
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make, in all
colours, shades except burgundy, bottle green, black of any size as approved
by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick
15 8.31 bed of cement mortar1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm, including pointing in white cement mixed
with pigment of matching shade complete
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete
as per the architectural drawings with 18 mm thick stone slab over 20 mm
(average) thick base of cement mortar 1:4 (1 cement
17 11.56 : 4 coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as directed
by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby
Red or equivalent Digitally signed by PRIYA
DSR2023 Description of Items Qty Unit Rate Amount
Providing and applying fibre reinforced elastomeric liquid water proofing
membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI)
of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of
self-priming of elastomeric waterproofing liquid (dilution with water in the
ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry
78 22.22A film thickness of complete application/system not less than 500 microns). The
operation shall be carried out after scrapping and properly cleaning the
surface to remove loose particles with wire brushes, complete in all respect as
per the direction of Engineerin-
Sub TOTAL 28,92,604.51
Multiply GST Factor(.973) 28,14,504.18
Digitally signed by PRIYA
PROJECT: RENOVATION & INTERIOR WORK OF CENTRE FOR PUBLIC POLICY AT CIMP PATNA
ESTIMATE - ELECTRICAL WORKS OF CLASSROOM
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
SUBHEAD :1 WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable in surface / recessed
medium class PVC conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable etc. as required.
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call
bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed PVC conduit etc as
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2
3 1.11 way modular switch, modular plate, suitable GI box and earthing the point with POINT 4 ₹ 1,803.00 ₹ 7,212.00 ₹ 7,212.00
1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as
Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit
along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core
cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
5 1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed
medium class PVC conduit as required.
Supplying and fixing following modular switch/ socket on the existing modular
6 1.24 plate & switch box including connections but excluding modular plate etc. as
Supplying and fixing following size/ modules, Gl box along with modular base
7 1.27 and cover plate for modular switches in recess etc as required.
Supplying and fixing modular blanking plate on the existing modular plate &
switch box excluding modular plate as required.
Supplying and fixing suitable size GI box with rnodular plate and cover in front
on surface or in recess, including providing and fixing 2 nos. 5 pin 5/6 amps
modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying and fixing suitable size GI box with modular plate and cover in front
10 1.31 on surface or in recess, including providing and fixing 3 pin 5/6 A modular EACH 20 ₹ 545.00 ₹ 10,900.00 ₹ 10,900.00
socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front
on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A
modular socket outlet and 15/16 A modular switch, connections etc. as
Supplying & fixing suitable size GI box with modular plate and cover in front on
surface or in recess including providing and fixing 25 A modular socket outlet
and 25 A modular SP MCB, "C" curve including connections, painting etc. as
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with
2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP
13 2.18 MCB, in sheet steel enclosure, on surface or in recess, with chained metal EACH 2 ₹ 1,806.00 ₹ 3,612.00 ₹ 3,612.00
cover for the socket outlet and complete with connections, testing and
commissioning etc. as required.
SUBHEAD:2 - LIGHT FITTINGS , FANS
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden
block including connections etc. as required.
Supplying and fixing brass batten/ angle holder including connection etc. as
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete
Supplying and fixing of following types lamp in the existing electrical fitting/
fixtures etc. as required.
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )
Supplying, Installation, Testing & Commissioning of LED Recessed/ surface
Down lighter (Round/ square/ Rectangular) SMD type of following body material
with PMMA and prismatic diffuser and construction as per IS : 10322 with driver
as per the requirement with Driver efficiency >85%, Operating voltage AC 140-
270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal
surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.
F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker
should be below 5%), life time (LED, Driver & electrical circuitry), of minimum
50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT
3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard
Deviation Colour Matching) <3, Maximum power consumption should not more
than the specified rating and Fixture shall be confirming to relevant BIS
5 8.1 standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen
printing on housing Complete in all respect i/c external connections with 1.5
sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and
earthing etc. as required with Minimum 5 year OEM warranty. System lumen
efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all
testing required for LED fixtures as per BIS shall be submitted. Shape size and
CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal
management: heat sink of aluminium housing such that LED junction
temperature shall not rise above 90°C)
Powder coated die cast /Extruded aluminium Body including trim
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
LED Panel light 2x2 ft. (System lumen efficacy ≥105
Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of
following body material and construction as per IS : 10322 with driver as per the
requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,
frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge
protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P.
F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker
should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum
50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per
LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K
/6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3,
Maximum power consumption should not more than the specified rating and
6 8.6 Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name
Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c
external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper
conductor single core cable and earthing etc. as required with Minimum 5 year
OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 &
LM80 Test report and all testing required for LED fixtures as per BIS shall be
submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as
per requirement. (Thermal management: heat sink of aluminium housing such
that LED junction temperature shall not rise above 90°C).
Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
LED Batten light (System lumen efficacy ≥105 <120
Supplying, Installation, Testing & Commissioning of LED surface mounted
Batten light of following body material and construction as per IS : 10322 with
driver (Replaceable) as per the requirement with Driver efficiency >85%,
Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range
-5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit
protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should
be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000
Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /
4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour
Matching) <3, Maximum power consumption should not more than the specified
7 8.9 rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/
Name Engraved/ Embossing/ Screen printing on housing. complete in all
respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated
copper conductor single core cable and earthing etc. as required with Minimum
5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79
& LM80 Test report and all testing required for LED fixtures as per BIS shall be
submitted. Shape size and CCT shall be as approved by Engineer-in- Charge
as per requirement. (Thermal management: heat sink of aluminium housing
such that LED junction temperature shall not rise above 90°C).
Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less
Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium
alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,
copper winding, steel/Al body Power Factor not less than 0.9, Service Value
(CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD
(Total Harmonic Distortion) less than 10%, suitable for operation with regulator
8 9.2 for speed control and all remaining accessories including safety pin, nut bolts,
washers, temperature rise=75 0C (max.), insulation resistance more than 2
mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan
compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm
FRLS/HFFR, PVC insulated copper conductor single core cable and earthing
etc. as required.
1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
Supply and fixing of stepped type electronic fan regulator on the existing
9 1.25 modular plate switch box including connections but excluding modular plate etc. EACH 24 ₹ 402.00 ₹ 9,648.00 ₹ 9,648.00
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supply and installation of following sweep/ sizes metallic blade, heavy duty,
single phase, 230 V A.C. Exhaust Fan in existing opening including making
good the damage, connection, testing and commissioning etc as required.
SUBHEAD :3 MCB, DBs
Supplying and fixing following way, horizontal type three pole and neutral, sheet
steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned
1 2.4 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB
DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing following rating, 240/415 volts, "C" curve, miniattlre circuit
breaker suitable for lnductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required
Supplying and fixing following rating, double pole, (single phase and neutral),
240 volts, residual current circuit breaker (RCCB), having a sensitivity current
30 mA in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
SUBHEAD :4 CABLE TRAYS
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray (Galvanisation thickness not less than 50 microns) with perforation
1 not more than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "bends" (galvanisation not less than 50 microns) with perforation not
2 more than 17.5%, in convenient sections, joined with connectors, suspended
from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "Tees" (galvanisation not less than 50 microns) with perforation not
3 more than 17.5%, in convenient sections, joined with connectors, suspended
from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
SUBHEAD :5 EARTHING & LIGHTING PROTECTION
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories,
1 5.2 and providing masonry enclosure with cover plate having locking arrangement EACH 4 ₹ 7,658.00 ₹ 30,632.00 ₹ 30,632.00
and watering pipe etc. with charcoal/ coke and salt as required.
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonary enclosure with cover plate having locking
arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke
and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as
strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring,
3 5.9 washer etc. as required. (Jointing shall be done by overlapping and with 2 sets METRE 125 ₹ 160.00 ₹ 20,000.00 ₹ 20,000.00
of G.I. nut bolt & spring washer spaced at 50mm).
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required.
Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long,
copper tube, having singte prong on top, with 85 mm dia 3 mm thick copper
base plate including holes etc. complete as required.
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall
for lightning conductor complete as required. ( For horizontal run)
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall
for lightning conductor complete as required. ( For vertical run)
Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip,
8 6.10 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuk nuts and spring EACH 2 ₹ 140.00 ₹ 280.00 ₹ 280.00
washers etc. complete as required.
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in
ground as required.
SUBHEAD :6 CABLE WORKS
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of
1 10.1 1.1 KV grade of following size direct in ground including excavation, sand
cushioning, protective covering and refilling the trench etc. as required.
1.1 10.1.1 Upto 35 sq.mm METRE 50 ₹ 453.00 ₹ 22,650.00 Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
CABLE TERMINATION
Supplying and making end termination with brass compression gland and
DSR-25 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
11.1 aluminium conductor cable of 1.1 KV grade as required.
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy
5 MR duty) armoured electrical power cable with aluminium conductor for working
voltage upto 1.1 KV as required.
SUBHEAD :7 TELECOMMUNICATION
Supplying and fixing following modular switch/ socket on the existing modular
1 1.24 plate & switch box including connections but excluding modular plate etc. as
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc. as required
Supplying and drawing .5 mm dia FRLS pvc insulated annealed copper
conductor unarmoured telephone wire in exisitng pvc conduit
Supplying and fixing of following sizes of medium class PVC conduit along with
4 1.21 accessories in surface/recess including cutting the wall and making good the
same in case of recessed conduit as required
SUBHEAD 8 - DATA
Supplying, Installation, Testing and commissioning of CAT6A Copper
Information Outlet (IO) with face plate of color as per site requirement, should
6 have ETL/UL verification program certificate for compliance with ANSI/TIA- EACH 16 ₹ 302.00 ₹ 4,832.00 ₹ 4,832.00
568.2-D. All copper Cable and Components should be from same OEM to
maintain compatibility and interoperability etc. complete as required.
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG
solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum,
Horizontal (solid) Cable suitable for high speed data networking application
supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted
DSR-25 Pairs (UTP) cable with color coded insulation for easy indentification should
39.18 have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke
Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC
11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable
Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by
UL/ ETL etc. complete as required.
SUBHEAD 9: UPS WITH BATTERY
Supplying, installation, Testing & Commissioning of following capacity at full
load (Unity Power Factor) at operating temperature 0 to 40 0C, Relative
humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot
swapable (allow for the replacement or addition of battery modules without
shutting down the entire system) modular Power Supply (UPS) system with N+1
modules (N denotes total number of modules required for rated capacity). The
UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back
up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS
rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS
Container) and Static Bypass switch along with provision for manual bypass,
suitable isolation transformer for additional protection against neutral faults etc.
UPS shall have inbuilt phase sequence correction. The UPS systems offered
are to be of the latest technology with Digital Control Microprocessor based for
DSR-25 reliable operation using Insulated Gate Bipolar
26.2 Transistor (IGBT)'s both for the rectifier & inverter
(3 Level) with PWM (Pulse Width Modulation). The
quality of design, manufacturing and inspection
process should confirm to the relevant Inter-national
standards such as IEC/EN/VDE. The operating
efficiency of the UPS systems shall be >96% while
operating on battery mode and delivering quality
power to the 100% non-linear loads. Current total
harmonic effect(ITHD) on the input grid shall be <
5% at 50 %load. (The required LC ( inductor (L) and
a capacitor (C)) filters shall be included in UPS
cost), extreme power factor kit to be included to limit the input power factor (PF)
to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be
kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7
26.2.1 10KVA (Each Power module shall be < 10 KVA) EACH 1 ₹ 2,08,893.00 ₹ 2,08,893.00 ₹ 2,08,893.00
SUBHEAD 10: MV PANELS
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections etc. as required.
2.1.1 100A, 16 KA, TPMCCB
2.3.1 200amps, 415 V heavy duty three phase with neutral busbar chamber
pole MCCB 100A, 16 KA, TPMCCB with thermomagnetic release and terminal
2.4.1 spreaders , 240/415 volts, "C" curve, miniature circuit of 40A to 63A TP&N
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
NDSR HVAC PANEL
Providing and fixing following rating and breaking capacity and pole MCCB with
thermomagnetic release and terminal spreaders in existing cubicle panel board
including drilling holes in cubicle panel, making connections etc. as required.
2.1.1 100A, 16 KA, TPMCCB
2.3.1 200amps, 415 V heavy duty three phase with neutral busbar chamber
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
31.3 Supplying, Installation, Testing & Commissioning of
Modular type Variable Refrigerant Flow/Variable
Refrigerant Volume air cooled Outdoor units suitable for
cooling/heating having 100% hermetically sealed inverter
type twin Rotary/Scroll Compressor(s),minimum two
compressors (with individual separate PCB) for above
14HP modules, microprocessor based Controller, top
discharge type condensing unit(s), with R-410-A
Refrigerant or equivalent, vibration Isolators with suitable
foundation etc. complete as required. To have better
efficiency condenser fan shall be capable to operate at
different speed with respect to load.The unit shall deliver
the rated capacity and in confirmation as per IS
18728:2024 and CPWD Specifications and work even at
50°C ambient temperature without tripping. The system
shall be able to deliver 100% of the rated capacity upto 39
°C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC
power supply and BMS compatible. The
unit shall be filled with first charge of the refrigerant and
ready for use as required. The condenser should be coated
with a hydrophilic film to prevent water accumulation on the
surface of the heat exchanger, enhance water dispersion,
and reduce the risk of degradation, thereby improving
overall performance and durability. The Indian Seasonal
Energy Efficiency Ratio (ISEER) of the unit shall be as per
Energy Conservation and Sustainable Building Code
(ECSBC) 2024 as below and complete as per CPWD
specification, connections, inter connections etc. as
For Cooling Heating or Both
Supplying, Installation, Testing and Commissioning of
following minimum capacity and external static pressure
VRF/VRV ceiling mounted mid static ductable type Indoor
unit equipped with washable synthetic media pre-filter, fan
section with low noise fan/dynamically balanced blower,
multispeed motor, coil section with DX copper coil,
electronic expansion valve, corded remote control, outer
cabinet, vibration Isolators, drain pan, drain pump, other
necessary supports etc., suitable for operation on single
phase AC supply 230 V ± 10%, 50 Hz complete as
required. The Indoor units must shut down upon receiving
a singal from the BMS System/Fire Singnals. The cooling
capacity of indoor unit will be at air inlet conditions of 27 0C
DB and 19 0C WB temperature. (Make will be same as of
Outdoor) Mid static ductable units (minimum 30 to 48 pascal external
static pressure)
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying, Installation, testing and commissioning including
vaccumiazation and Nitrogen testing of following nominal
sizes of soft/hard drawn copper refrigerant piping for
VRV/VRF system, complete with fittings, with suitable
adjustable ring type hanger supports, jointing/brazing
including accessories, insulated with XPLE Class-O tubular
insulation/with Class-O closed cell elastometric nitrile
rubber tubular sleeves sections of 19 mm thick insulation
as given below for Suction and Liquid lines, all accessories
as per specifications etc. as required :
31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 100 487.00 48,700.00
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2
TOTAL COST FOR ELECTRICAL WORKS OF POLICY BUILDING ₹ 28,06,862.00 ₹ 14,309.00 ₹ 28,21,171.00
Digitally signed by PRIYA
BOQ Of PLUMBING & SANITARY WORKS
DSR- DSR ITEMS NDSR ITEMS
Sr.No. Particulars Unit
2023 Qty Rate Amount Rate Amount
SANITORY FIXTURES-
1 17.4 Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes
respectively with CI automatic flushing cistern with fittings, RS or CI
brackets standard size galvanized steel flush pipe and spreaders with brass
unions and GI clamps complete including painting of cistern and fittings,
17.4.3 Range of three urinals with 10 Litre white PVC automatic flushing cistern
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets,
White Vitreous China cutting and making
Wash basin good the
size 630x450 mmwalls
withwherever require:
a pair of 15 mm
17.7.1 C.P. brass pillar taps 2.00 Each 2,648.85 5,297.70
17.3 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush
bend, overflow arrangement with specials of standard make and mosquito
proof coupling of approved municipal design complete, including painting of
fittings and brackets, cutting and making good the walls and floors
wherever required
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid 8.00 Each 8,006.60 64,052.80
3 17.1 Providing and fixing white vitreous china water closet squating pan (Indian
type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5
Litre high level CI flushing cistern (of approved make) with fittings RS or CI
brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and
clamps 20 mm GI over flow pipe with specials and mosquito proof coupling
of approved municipal design and GI chain and pull complete including
painting of cistern and fittings, cutting and making good the
walls and floors where required.
a) Long Pan patten WC Pan Each 8587.70
b) Orissa Pattern WC Pan Each 7466.60
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with
integral type foot rests
Digitally signed by PRIYA
DSR- DSR ITEMS NDSR ITEMS
Sr.No. Particulars Unit
2023 Qty Rate Amount Rate Amount
4 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality &
make as pproved by Engineer in charge. 15mm nominal dia.
Tap mixture - for all bathroom
Providing & Fixing chrome plated brass battery based infrared sensor
operated pillar cock, having foam flow technology.
15mm nominal bore 8.00 Each 8,803.70 70,429.60
Providing and fixing SS towel rail complete with brackets fixed to wooden
cleats with CP brass screws with concealed fitting arrangement of approved
6 MR quality and colour.450mm long towel rail with length of 495mm, 78mm 8.00 Each 1,673.40 13,387.20
wide and effective height of 88mm, weighing not less than 170 gms.
450mm long towel rail with length of 495mm, 78mm wide and effective
height of 88mm, weighing not less than 170 gms.
7 17.34 Providing and fixing toilet paper holder.
8 MR SS health Faucets of 1 meter length with bidet sprayers 8.00 Each 1,800.00 14,400.00
Providing and fixing SS liquid soap container 109 mm wide, 125mm high
and 112mm distance from wall of standard shape with bracket of the same
materials with snap fittings of approved quality colour and make, weighing
not less than 105gms.
Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off
supported on anodised aluminium angle frame with C.P. brass brackets and
guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete
Digitally signed by PRIYA
DSR- DSR ITEMS NDSR ITEMS
Sr.No. Particulars Unit
2023 Qty Rate Amount Rate Amount
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers comelete.
Providing and fixing C.P. brass long nose bib cock of approved quality
12 18.50 conforming to IS stamdards and weighing notless than 810 gms. 12.00 Each 820.70 9,848.40
15mm nominal bore
High speed and long- lasting ECO friendly product 95% cost saving vs.
paper towels.One piece weld- free cober fixed by vandal proof lock screw
The most Hygienic drying solution. Voltage- 230V/50Hz, 10A or
13 MR 120V/60Hz, Air temperature 42"C /d(D=10cm, Room Temp.=25 degree C0,
Rated Power- 2100W, Air Velocity 20M/s Drying Time- 20-25S, Sensor
range 5-15Cm, Noise- 65dB, Electric Isolation -Class1, Brush Motor
Hand Dryer for Washroom 4.00 Each 10,146.80 40,587.20
Multiply GST Factor(.973) 3,02,146.42
Digitally signed by PRIYA
BOQ OF INTERIOR ITEMS
DSR ITEMS NON-DSR ITEMS
Sr.No. Sr. No.. DSR/MR Particulars Qty Unit
Rate Amount Rate Amount
INTERIOR DESIGN, PANELLING-
Partition Wall of Classrooms and Cabins-
Partition Board -
1 1.00 21.20 12mm thick one side Pre- Laminated particle board (decorative lamination on one side and
other sides balancing lamination) grade-1, medium density flat pressed, three layer particle
board FPT-1 or graded wood particle board FPT-1 confirming to IS : 3087 bonded with
BWP type synthetic resin adhesive as per IS : 848 and pre- laminated confirming to IS :
12823, Grade - 1, Type II marked.
2.0 2.0 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the
14.5.1 Float glass panes of nominal thickness 4 mm (weight not less 100.00 Sqm 1,090.65 1,09,065.00
3.00 3.00 26.22 Providing and fixing false ceiling at all heights with integral densified calcium silicate
reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved
texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal
level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33
mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T
runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200
mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid
module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items
(galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully
threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6
mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25
mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with
Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed
on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center
and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications,
26.22.2 With and thick
15 mm as pertegular/butt
directionsofedged
the Engineer-in-Charge.
without perforation plain/designer light weight
calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801
OPENING FIXTURES- DOORS & WINODWS
Digitally signed by PRIYA
DSR ITEMS NON-DSR ITEMS
Sr.No. Sr. No.. DSR/MR Particulars Qty Unit
Rate Amount Rate Amount
26.88 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
decorative type flush door shutter of required size comprising of virgin polymer of K value
58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)
having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) &
900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850
N/mm2 and resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with
PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on
both faces of shutter and fixing with stainless steel butt hinges of required size with
necessary full body threaded star headed counter sunk S.S screws, all as per direction of
Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be
paid separately)
26.88 Providing and fixing factory made single extruded WPC Providing and fixing factory made single
extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size
comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural
fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of
12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N
(Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850
N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer
proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14
microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing
with stainless steel butt hinges of required size with necessary full body threaded star headed
counter sunk S.S screws, all as per direction of Engineer-In- Charge.
(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid
26.86.4 door/window/Clerestory
Frame size 50 x 125 mm windows & other Frames/ Chowkhat comprising of virgin PVC polymer of 200.00 metre 1,075.70 2,15,140.00
Glass Panelling-
Digitally signed by PRIYA
DSR ITEMS NON-DSR ITEMS
Sr.No. Sr. No.. DSR/MR Particulars Qty Unit
Rate Amount Rate Amount
5.00 4.00 25.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-
sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as
required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of
approved colour and shade with reflective soft coating on surface # 2 of approved colour
and shade, an inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide,
dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all
complete for the required performances, as per the Architectural drawings, as per the
approved shop drawings, as specified and as directed by the Engineer- in-Charge. The IGUs
shall be assembled in the factory/ workshop of the glass processor.
Code NoDescriptionUnitRate
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the
areas of the grooves and weather silicone sealant) provided and fixed in position, shall be
measured in sqm.
(i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face # 2,
+ 12 mm Airgap + 6 mm Heat Strengthened clear Glass of approved make having properties
as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light
reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3
W/m2 degree K etc. The properties of performance glass shall be decided by technical
sanctioning authority as per the site requirement.
Miscellenious Area 50.00 Sqm 3,718.70 1,85,935.00
7.00 5.00 MR Providing and fixing 450 mm deep pantry cabinet above counter wooden cupboards
shutters with teak wood shutter 20mm
thick shutter fixed to cabinet by means of necessary brass fittings such as hinges tower bolt
ball catcher handle etc. complete
including 19 mm thick vertical/ horizontal partitions of commercial ply board with drawer
unit with guide rail including locking arrangement and knobs heavy duty SS hanger rail ext.
painting of wooden members with two or more coats of synthetic enamel paint of approved
Rack & Cabinet (Wood Work)
Designer Wall for Reception in Lobby-
Digitally signed by PRIYA
DSR ITEMS NON-DSR ITEMS
Sr.No. Sr. No.. DSR/MR Particulars Qty Unit
Rate Amount Rate Amount
8.00 6.00 MR Supply & installation of acoustical melamine finish wooden perforated board made of
pinewood E1 grade fiberboard, with big circular perforations of 50mm dia, melamine
laminated finish, Flame retardant grade, size 600x1200x16mm, Square edge, volume
density of base board 800Kg/m3, weight 8.8Kgs/m2 installed by using Strut framework
system and Z bar. Sqm 429.15 9,268.00 39,77,362.20 Strut framework system includes
Strut having thickness 0.55mm, length 3600mm, knurled web 35, depth 20mm and equal
flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c. Z-
bar having 40mm height, thickness 1mm is first fixed behind the panels by using suitable
fasteners. Another length of Z-bar are then installed over Strut horizontally at spacing so as
to match with Z-bar at rear of acoustical melamine finish wooden perforation panels.
Acoustical melamine finish wooden perforation panels of size 600x1200x16mm are then
Panels are backlined with polyfiber 10x25 held in position with dab spots of approved
Technical Parameters
• Fire (Class) – 1 & P (For FR grade)
• Acoustics – NRC upto 0.85
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 40, 70
• Light reflectance (%) – Colour Dependant
• Green (VOC, RC %) – Low, 25
Wooden Panelling with miniral wool pachaging at the back
Additional Design (Plus)
GLASS GLAZED Door -
0.00 Providing and fixing door of IGU Panels in the curtain glazing included Coloured tinted float glass 6 mm
thick substrate with reflective sorf coating on face #2, +12 mm Airgap +6 mm Heat Strengthened clear
Glass of approved make having properties as visible light transmittance (VLT) of 25 to 35% Light
Reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25-0.28) and U
value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by
technical santioning authority as per site requirement.
Double Leaf Door (Main Door)
Digitally signed by PRIYA
DSR ITEMS NON-DSR ITEMS
Sr.No. Sr. No.. DSR/MR Particulars Qty Unit
Rate Amount Rate Amount
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height
dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded
profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming
process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder
coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be
40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including
drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of
required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-
Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)
Two track two panels sliding window with Aluminium channel
for roller track, wool pile, nylon rollers with SS 304 body.
Using R2 series with frame (40 mm & above)
x (40 mm & above) & sash (25 mm & above)
9.147.A1.1 x (50 mm & above) with zinc alloy (zamak)
powder coated touch locks with hook (Height
Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes
8018 fire rating) including hinges ( without glass panels)
8017 Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire rating)
Multiply GST Factor(.973) 26,50,575.79
TOTAL (DSR+NDSR) 35,38,867.63
Digitally signed by PRIYA
BOQ OF FURNITURE & ITEMS
Sr.No. Particulars Qty Unit Rate Amount
Conference Table with chair -
1 Providing and placing Meeting/ Conference tables :
Worktop: Worktop shall be made out of 25mm thick BW grade BB/E1 grade MDF/Particle Board
cover with laminate and all the edges of worktop shall be provided with machine pressed 1.5-2 mm
thick ABS edge banding glued with hot melt EVA glue. E1/good grade laminate with zero urea
formaldehyde emissions (<or= 8mg/100 g oven dry boardperforated method) for better in-house air
quality.This should comply with (EN 120-1992). The height of Worktop shall be 750 mm from
ground level. Understructure: MS understructure with 50mm x50mm C type square Straight leg, well
supported with MS beams under table top to supported top & connected to leg to leg
Wire management: Access Flap and Switch
Mounting Tray is provided in the table. It is Made
from Matt silver Anodized Aluminium extrusion and plastic moulded components to facilitate access
of Electrical/Data/Voice sockets access from Top. Powder coated switch mounting tray made from
0.8mm and 1.2mm MS sheet(IS:513) which is powder coated 80-90micron. Switches to be mounted
on tray as per requirement. Provision for mounting 8 Module Switch plate on switch mounting tray
shall be provided. Electrical/Data/Voice wire and IO to be paid separately. The product should be
complete and as per approved sample and as per the direction of Enginner. Completely consoled
wire management with vertical wire uptake from floor via middle leg having removable cover one
side and wire separator for data and wire separation, segregates to horizontal cable tray below
Access Flap. Product should be BIFMA gold rated SCSglobal certified for in-house air quality and with
10 years warranty of amke Rockworth Platform Series/Haworth -Plane Series / Navi Team Island.
16 Pax Rect Meeting table 4200W x1350D x750Hmm 1.00 Each 98,567.00 98,567.00
11 Seater Conference Table
Digitally signed by PRIYA
Sr.No. Particulars Qty Unit Rate Amount
2 Providing and supplying visitor chair with ergonomic design, user comfort & aesthetically appealing.
The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high
resilience moulded polyurethane foam 50mm thick having density 45kg/m³ in seat and 45mm thick
having density 35Kg/m³ in back. The seat and back shall be upholstered with fabric tapestry 1mm
thick and 300 GSM. The back and base of chair shall be supplied with polypropylene/ABS moulded
cover and the backrest shall be made by natural curvature of the spine. The seat and back shall be
arrested together with 50-60µ thick HR steel spine. The armrest shall be made of black integral
polyurethane with metal insert completely joint with seat and back. The frame structure shall be
cantilever support type made up of MS CRCA powder coated with 50µ~60µ (DFT) thick round pipe
of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on
the floor. The seat size shall be 480±10 mm(W) X 450±10 mm(D) and back size shall be 480±10
mm(W) X 350±10 mm(H) from seat & overall height = 820±10 mm.
3 Supplying and placing Cafe Chair. The seat and back shall be made of perforated polypropylene shell.
The seat and back shall be fixed with metal frame. The frame structure shall be supported by four
legs made up of MS CRCA chrome plated tubular pipe of size 30mm X 15mm with 1.6mm thick. There
shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 415±10
mm(D) X 455±10 mm(W) and back size shall be 455±10 mm(W) X 390±10 mm(H) from seat. Overall
height shall be = 820±10 mm.
4 Supplying & placing center table with an overall Round shape of 6feet and more dia. The top of the
table shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823. The top
profile shall be in square shape and the edges shall be sealed with 2mm thick thin strip of
impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge
banding machine at 200 degree Celsius. The top shall be supported on SS 202 grade pipe frame with
shiny chrome finish. The under structure pipe frame shall have the cross-section area 40mm X
20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor. The
manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-
18001:2007, BIFMA membership and AIOTA certification. The board used should meet International
Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-
withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.
Round Table (6 Chair seating ) 5.00 Each 25,000.00 125000.00
Digitally signed by PRIYA
Sr.No. Particulars Qty Unit Rate Amount
5 Supplying & placing center table with an overall size 600mm X 600mm X 450mm. The top of the
table shall be made up of 25mm thick Pre-laminated particle board of grade II of IS 12823. The top
profile shall be in square shape and the edges shall be sealed with 2mm thick thin strip of
impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge
banding machine at 200 degree Celsius. The top shall be supported on MS powder coated rectangle
pipe frame with cross-section area 40mm X 20mm. The under structure shall have MS powder
coated four legs with Dia. 38mm at upper and 28mm at lower. There shall be PPCP shoe provided at
the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance
like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA
certification. The board used should meet International Standard of quality, Indian standard IS
12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture
and modulus of elasticity bending tested as per IS 2380.
Rectangular Table 2.00 Each 20,000.00 40000.00
6 Supplying and placing ergonomically designed, comfortable & aesthetically appealing High back
chair. The seat and back shall be made of 18mm and 15mm thick hot pressed commercial plywood
padded with HR polyurethane foam 40mm thick having density 40kg/m³ in seat and 12mm thick
having density 23Kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick
and 535 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine
which helps to provide lumbar support as well as head support. The armrest shall be used PP arm
completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree
revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat
height adjustment for healthy seating user can adjust seat height up to 80mm with BIFMA standard
class-3 gas-lift to suite them using the lever under the seat. The gas-lift mechanism should be tested
as per BIFMA/ANSI standard X5.1-2011. The pedestal should have five legged MS/CRCA chrome
plated having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors which shall be made of
injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard
tested to perform 98,000 cycles with 250lbs load. The seat size shall be 500±10 mm(W) X 500±10
mm(D) and back size shall be 720±10 mm(H) from seat & overall height = 1135±10 mm.
Digitally signed by PRIYA
Sr.No. Particulars Qty Unit Rate Amount
7 Supplying and placing a two seater sofa that shall be constructed from natural hard wood and
commercial plywood having inner frame. The thickness of the wood should allow for the heavy
tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall
be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in
back. There shall be cushion arm provided padded with high resilience polyurethane foam having
density 32Kg/m³. A SS strip shall be provided on front of the arm having cross-section area 14mm X
4mm. The structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM.
The understructure shall have shiny chrome finish SS leg with height 100mm and 10mm thick. There
shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 500±10
mm(D) X 1480±10 mm(W), seat height = 430±10 mm, overall width = 1625±10 mm, overall depth =
750±10 mm & overall height = 700±10 mm.
Digital Screen-
8 SITC of Projector including stand/ wall
bracket/ ceiling mounting brackets as per
site requirement/ instruction of Engineer/
DFCCIL. 6000 ISO Lumens, WUXGA resolution,
Laser light source, Single Chip DLP Projector - 6000 ISO Lumens, WUXGA resolution, Laser light
source, Single Chip DLP projector with HDMI 1.4a X 2, HDMI
1.4a+ MHL x 1, VGA IN X 1, 3D Sync Out x 1, Audio IN 3.5 mm jack x 1, Audio in Phono X 2, Audio Out
x 1, USB Type A X1, RS232 X 1, LAN X 1, HD Base-T X 1, Standard Zoom lens, 20,000,00 :1 Dynamic
Contrast ratio, 20,000 hours light source life.
Projector/Digital Screen
Digitally signed by PRIYA
Name of Work: CONSTRUCTION,INTERIOR & RENOVATION WORKS FOR START- UP
INCUBATION CENTRE AND CENTRE FOR PUBLIC POLICY AT CHANDRAGUPT INSTITUTE
OF MANAGEMENT PATNA (CIMP), PATNA, BIHAR
SUMMARY OF COST-AUDITORIUM (150 PAX.)
Sl No. Sub - Head Amount Remarks
1 CIVIL WORKS 1,23,39,049.90
2 ELECTRICAL WORKS 29,74,668.00
3 PLUMBING & SANITARY WORKS 3,08,561.98
Digitally signed by PRIYA
COST ESTIMATE FOR CONSTRUCTION OF HAAL ARYABHATT UNIVERSITY ,PATNA
START- UP INCUBATION CENTRE AND CENTRE FOR PUBLIC POLICY (AUDITORIUM AT CIMP)
BILL OF QUANTITY
DSR AMOUNT NDSR AMOUNT
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Designing, providing, installing and fixing factory finished custom
designed cold form Light Gauge Steel Framed super structure
comprising of steel wall panel, trusses, purlins etc manufactured out of minimum
0.75 mm thick steel sheet as per design requirements. Thesteel sheet shall be
galvanized (AZ-150 gms Aluminum Zinc Alloycoated steel having minimum yield
strength 300- 550 Mpa) conformingto AISI specifications and IBC 2009 for cold
formed steel framing andconstruction and also as per IS: 875-1987, ISO 800-1984
and IS: 801-1975. The wind load shall be as per provisions of IS 875 (part -
III).LGSFS frame shall be designed as per IS: 801 using commerciallyavailable
26.41 software such as Frame CAD Pro-11.7/ STAAD PROV8i/ArchitekV2.5.16/ Revit KG 11260 285.90 32,19,234.00
architecture-2011 or equivalent. Properusage of Connection Accessories like
Heavy Duty Tension Ties, LightDuty Hold-ons, Twist Straps (to connect truss with
wall frames), StrongTie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for
betterstructural stability. The framing section shall be cold form C-typehaving
minimum web depth 89 mm x 39mm flange x 11mm lip inrequired length as per
structural design requirement duly punched withdimple/slot at required
locations as per approved drawings. The slotswill be along centre line of webs and
shall be spaced minimum 250mm away from both ends of the
member.STRUCTURAL STEEL WORK FOR COLUMN & BEAM
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Providing and fixing of external wall system on Light gauge steel
frame work with outer face cement boards as per standard sizes
fixed with self- drilling/ taping rews/ fasteners @ 60cm c/c of
approved make.A groove of 2mm to3mm shall be maintained and
grooves shall be sealed with silicon based sealant.The board shall be
fixed in a staggered pattern. Screws shall be of counter sunk rib
26.42 head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying
from 25 to 45 mm and. Internal face 12.5 mm thick gypsum
plaster board fixed on cement board as per standard sizes fixed
with self- drilling/ taping screws/ fasteners @ 60cm c/c of approved
make, proper taping and jointing to be done using fiber mesh tape and
epoxy and acrylic based jointing compound for seamless finish.(cos of
frame work to be paid for separately)
Outer face: Outer face having 8 mm thick cement bondedparticle Board fixed on
10 mm thick cement bondedparticle board. (Termite, Fire and Moisture
Resistance) asper IS 14276:1995. Inner face:-12.5 mm thick gypsumplaster
board conforming to IS 2095:2011 fixed on 8 mmthick cement bondedparticle
board (Termite, fire and
moisture resistance confirmin to IS: 14276:1995)
Providing and fixing 50 MM THICK PPGI PUFF ROOF GI SHEET having density
NS of puff as 40 kg/cum and Complies to IS 12436 and GI sheet both sides of SQM 375 3,030.00 11,36,250.00
thickness 0.45 MM.
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per
12.51 IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the
sheet and polyester top coat 15- 18 microns using self drilling/ self tapping
screws complete
Providing and fixing in all exterior face panels breathable vapour
26.44 barrier underneath the cement fiber board as per National Building SQM 560 298.75 1,67,300.00
Code 2009 complete as per direction of Engineer-in-charge.APOUR BARRIER
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Providing and fixing thermal insulation with Resin Bonded rock wool
conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G
12.62 Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers and held SQM 350 322.50 1,12,875.00
and in position by criss cossing GI wire etc. complete as per directionofEngineer-
DSR-0067 Hiring charges for 80 MT crane for erection of structure on 6th floor per day 15 16,800.00 2,52,000.00
Demolishing R.C.C. work including stacking of steel bars and
disposal of unserviceable material withing 50 metres lead:
Disposal of building rubbish / malba / similar unserviceable,
dismantled or waste materials by mechanical means, including
15.60 loading, transporting, unloading to approved municipal dumping Cum 5 263.95 1,319.75
ground or as approved by Engineer-in-charge, beyond 50 m initial
lead, for all leads including all lifts involved.
Providing and applying white cement based putty of average
thickness 2 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth
Providing and applying two coats of fire retardent paint FR 881
unthinned on cleaned wood/ply surface @ 3.5 sqm per litre per coat
inncluding preparation of base surface as per recommendationnns of
fmanufacturer to make the surface fire retardent
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08%
and conforming to IS: 15622, of approved brand & manufacturer, in all
11.47 colours and shade, in skirting, riser of steps, laid with cement based -
high polymer modified quick set tile adhesive (water based) conforming
to IS: 15477, in average 6 mm thickness, including grouting of joints
(Payment for grouting of joints to be made separately).
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be
specified by the manufacturer) of ist quality conforming to IS :
15622 of approved make in colours such as white , Ivory , Grey , FumeRed , Brown
, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including
pointing the joints with white cement and matching pigment etc., complete.
Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622
(Thickness to be specified by the manufacture) of approved make in all colours,
shades except burgundy , bottle green , black of any size as approved by Engineer-
in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement
Motar 1:3(1 cement: 3
coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm
including pointing in white cement mixed with pigment of matching
shade complete. TILES
Providing and laying gang saw cut 18 mm thick, mirror polished pre
moulded and pre polished machine cut granite stone of required size
and shape of approved shade, colour and texture in footpath,
16.86 flooring in road side plazas and similar locations, laid over 20mm
thick base of cement mortar 1:4 (1cement : 4 coarse sand) including
grouting the joints with white cement mixed with matching pigment,
epoxy touch ups etc. complete as per direction of Engineer-
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Providing and fixing mineral fibre false ceiling tiles at all heights of size
595X595mm of approved texture, design and pattern. The tiles should
have Humidity Resistance (RH) of 99%, Light Reflectance ?85%,
Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as
per (BS 476 pt - 6 &7)in true horizontal level suspended on
interlocking T-Grid of hot dipped all round galvanized iron section of
0.33 mm thick (galvanized @120 gsm ) comprising of main T runners
of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length
1200 mm and secondary intermediate cross T of size 15x32 mm of
length 600 mm to form grid module of size 600x600 mm suspended
from ceiling using galvanized mild steel item (galvanised@80gsm) 50
26.27 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully
threaded hanger rod up to 1000 mm length and L-shape level adjuster
of size 85x25x2 mm, spaced at 1200 mm centre to centre along main
‘T’. The system should rest on periphery walls /partitions with the help
of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm
thick sheet, to be fixed to the wall with help of plastic rawl plug at 450
mm centre to centre & 40 mm long dry wall S.S. screws. The exposed
bottom portion of all T-sections used in false ceiling support system
shall be pre-painted with polyester baked paint, for all heights. The
work shall be carried out as per specifications, drawings and as per
directions of the engineer-in-charge.
With 20 mm thick beveled tegular mineral fibre false
ceiling tile (NRC 0.7)
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
Providing and fixing factory made uPVC white colour sliding glazed window upto
1.50 m in height dimension comprising of uPVC multi-chambered frame with in-
built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm
thick galvanized mild steel section made from roll forming process of required
length (shape & size according to uPVC profile), appropriate dimension of uPVC
extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,
zinc alloy (white powder coated) touch locks with hook, zinc alloy body with
single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8
mm size for fixing frame to finished wall and necessary stainless steel screws etc.
Profile of frame & sash shall be mitred cut and fusion welded at all corners,
including drilling of holes for fixing hardware's and drainage of water etc. After
fixing frame the gap between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes, wire mesh and silicon sealent shall be paid
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in
dimension i.e. in depth & width of profile shall be acceptable.
Three track three panels sliding window with Aluminium
9.147.A5 channel for roller track, wool pile, nylon rollers with SS 304
Using R4 series with frame (115 mm & above)
x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy
(zamak) powder coated handle on two end panels
along with multi-point locking system. (Height above 1.8 metre).
Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance ±1mm), with
wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with
galvanized brackets and stainless steel screws, joints mitred and plastic welded.
The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19
X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges
fixed to the frame complete as per manufacturer’s specification and direction of
Engineer-in-charge
Digitally signed by PRIYA
DESCRIPTION UNIT QTY RATE AMOUNT RATE AMOUNT
9.117.2 Extruded section profile size 42x50 mm M 151.3 331.35 50,133.26
25 mm thick PVC flush door shutters made out of a one piece Multi chamber
extruded PVC section of the size of 762mm X 25 mm or less as per requirement
with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size
23x10 mm are provided on both vertical edges to ensure the overall thickness of
25 mm. An M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm)
is inserted along the hinge side of the door. Core of the door shutter should be
9.118.3 filled with High Density Polyurethane foam. SQM 11 3,068.85 33,757.35
The Top & Bottom edges of the shutter are covered with an end-cap of the size
25mm X 11 mm. Door shutter shall be reinforced with special polymeric
reinforcements as per manufacturer’s specification and direction of Engineer-
incharge to take up necessary hardware and fixtures. Stickers indicating the
locations of hardware will be pasted at
appropriate places.
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC
hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt
edging on both sides. The styles and rails mitred and joint at the corners by means
of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0
mm and stainless steel screws.
The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20
mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a
uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,
fixed to the shutter styles by means of
plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC
multichambered single panel of size not less than 620 mm, having over all
thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled
vertically and tie ar at two places by inserting horizontally 6 mm galvanised M.S.
rod and fastened with nuts and washers, complete as
per manufacturer’s specification and direction of Engineer-incharge.
(For W.C. and bathroom door shutter).
Multiply GST Factor(.973) 1,12,02,799.90
GRAND TOTAL 1,23,39,049.90
GRAND TOTAL 1,23,39,049.90
Digitally signed by PRIYA
PROJECT: RENOVATION & INTERIOR WORK OF START-UP INCUBATION CENTRE AND CENTRE FOR PUBLIC POLICY AT CIMP PATNA
CLIENT- CHANDRAGUPTA INSTITUTE OF MANAGEMENT, PATNA
ESTIMATE - ELECTRICAL WORKS OF AUDITORIUM
Rev-0 Date - 20.12.25
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
SUBHEAD :1 WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable in surface / recessed
medium class PVC conduit, with modular switch, modular plate, suitable GI box
1 1.10 and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable etc. as required.
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call
bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed PVC conduit etc as
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit, 2 way
3 1.11 modular switch, modular plate, suitable GI box and earthing the point with 1.5 POINT 6 ₹ 1,803.00 ₹ 10,818.00 ₹ 10,818.00
sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper
conductor single core cable in surface / recessed medium class PVC conduit along
with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop
earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of
5 1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed
medium class PVC conduit as required.
Supplying and fixing following modular switch/ socket on the existing modular
6 1.24 plate & switch box including connections but excluding modular plate etc. as
Supplying and fixing following size/ modules, Gl box along with modular base and
7 1.27 cover plate for modular switches in recess etc as required.
Supplying and fixing modular blanking plate on the existing modular plate &
switch box excluding modular plate as required.
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying and fixing suitable size GI box with rnodular plate and cover in front on
surface or in recess, including providing and fixing 2 nos. 5 pin 5/6 amps modular
socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on
10 1.31 surface or in recess, including providing and fixing 3 pin 5/6 A modular socket EACH 5 ₹ 545.00 ₹ 2,725.00 ₹ 2,725.00
outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular
socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying & fixing suitable size GI box with modular plate and cover in front on
surface or in recess including providing and fixing 25 A modular socket outlet and
25 A modular SP MCB, "C" curve including connections, painting etc. as required.
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2
pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in
13 2.18 sheet steel enclosure, on surface or in recess, with chained metal cover for the EACH 2 ₹ 1,806.00 ₹ 3,612.00 ₹ 3,612.00
socket outlet and complete with connections, testing and commissioning etc. as
SUBHEAD:2 - LIGHT FITTINGS , FANS
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden
block including connections etc. as required.
Supplying and fixing brass batten/ angle holder including connection etc. as
Supplying and fixing of following types lamp in the existing electrical fitting/
fixtures etc. as required.
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
LED Down lighter (SMD Type) (System lumen
efficacy ≥ 105 < 120 lm/Watt )
Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down
lighter (Round/ square/ Rectangular) SMD type of following body material with
PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per
the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,
frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection
of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI
>80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life
time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with
70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K /
6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3,
Maximum power consumption should not more than the specified rating and
5 8.1 Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/
Name Engraved/ Embossing/ Screen printing on housing Complete in all respect
i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper
conductor single core cable and earthing etc. as required with Minimum 5 year
OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 &
LM80 Test report and all testing required for LED fixtures as per BIS shall be
submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per
requirement. (Thermal management: heat sink of aluminium housing such that
LED junction temperature shall not rise above 90°C)
Powder coated die cast /Extruded aluminium Body including trim
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
LED Panel light 2x2 ft. (System lumen efficacy ≥105
Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following
body material and construction as per IS : 10322 with driver as per the
requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,
frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge
protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95,
IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be
below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000
Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80
extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As
per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power
consumption should not more than the specified rating and Fixture shall be of
6 8.6 relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/
Screen printing on housing. complete in all respect i/c external connections with
1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and
earthing etc. as required with Minimum 5 year OEM warranty. System lumen
efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing
required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be
as approved by Engineer-in-Charge as per requirement. (Thermal management:
heat sink of aluminium housing such that LED junction temperature shall not rise
Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
LED Batten light (System lumen efficacy ≥105 <120
Supplying, Installation, Testing & Commissioning of LED surface mounted Batten
light of following body material and construction as per IS : 10322 with driver
(Replaceable) as per the requirement with Driver efficiency >85%, Operating
voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C,
internal surge protection of 2.5 KV with Short & Open circuit protection, THD <
10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time
(LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of
initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As
per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power
consumption should not more than the specified rating and Fixture shall be of
7 8.9 relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/
Screen printing on housing. complete in all respect i/c external connections with
1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and
earthing etc. as required with Minimum 5 year OEM warranty. System lumen
efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing
required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be
as approved by Engineer-in- Charge as per requirement. (Thermal management:
heat sink of aluminium housing such that LED junction temperature shall not rise
Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
Supply and installation of Philips neos wall light , Tunable white sleek wall light i.e.
3-mode tunable white lightingGold & silver color options,Contemporary,
MR minimalist design having bulb 12 w and 900 LM having surge protect upto 3.5 KV EACH 10 ₹ 850.00 ₹ 8,500.00 ₹ 8,500.00
making connection, testing, commissioning etc as required
Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the
bracket, making connection, testing, commissioning etc as required.
Supply and installation of following sweep/ sizes metallic blade, heavy duty, single
phase, 230 V A.C. Exhaust Fan in existing opening including making good the
damage, connection, testing and commissioning etc as required.
SUBHEAD :3 MCB, DBs
Supplying and fixing following way, horizontal type three pole and neutral, sheet
steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned
1 2.4 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying and fixing following rating, 240/415 volts, "C" curve, miniattlre circuit
breaker suitable for lnductive loads of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying and fixing single pole blanking plate in the existing MCB DB complete
etc. as required
Supplying and fixing following rating, double pole, (single phase and neutral), 240
volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in
the existing MCB DB complete with connections, testing and commissioning etc. as
SUBHEAD :4 CABLE TRAYS
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray (Galvanisation thickness not less than 50 microns) with perforation not
DSR-25 more than 17.5%, in convenient sections, joined with connectors, suspended from
4.6 the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
1.1 4.6.7 600 mm width X 50 mm depth X 2.0 mm thickness METRE 50 ₹ 1,925.00 ₹ 96,250.00 ₹ 96,250.00
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "bends" (galvanisation not less than 50 microns) with perforation not
DSR-25 more than 17.5%, in convenient sections, joined with connectors, suspended from
4.7 the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray "Tees" (galvanisation not less than 50 microns) with perforation not
DSR-25 more than 17.5%, in convenient sections, joined with connectors, suspended from
4.8 the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
SUBHEAD :5 EARTHING & LIGHTING PROTECTION
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and
1 5.2 providing masonry enclosure with cover plate having locking arrangement and EACH 1 ₹ 7,658.00 ₹ 7,658.00 ₹ 7,658.00
watering pipe etc. with charcoal/ coke and salt as required. Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonary enclosure with cover plate having locking
arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke
and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip
earth electrode, including connection/ terminating with G.I. nut, bolt, spring,
3 5.9 washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of METRE 20 ₹ 160.00 ₹ 3,200.00 ₹ 3,200.00
G.I. nut bolt & spring washer spaced at 50mm).
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
connections etc. as required.
Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long,
copper tube, having singte prong on top, with 85 mm dia 3 mm thick copper base
plate including holes etc. complete as required.
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for
lightning conductor complete as required. ( For horizontal run)
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for
lightning conductor complete as required. ( For vertical run)
Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125
8 6.10 mm long, with 4 nos. of tinned brass bolts, nuts, chuk nuts and spring washers etc. EACH 2 ₹ 140.00 ₹ 280.00 ₹ 280.00
complete as required.
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in
ground as required.
SUBHEAD :6 CABLE WORKS
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
1 10.1 KV grade of following size direct in ground including excavation, sand cushioning,
protective covering and refilling the trench etc. as required.
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power
cable of 1.1 KV grade of following size on wall surface as required.
2.1 10.7.1 Upto 35 sq. mm (Clamped with 25 x 3 mm MS flat clamp) METRE 25 ₹ 64.00 ₹ 1,600.00 ₹ 1,600.00
CABLE TERMINATION
Supplying and making end termination with brass compression gland and
DSR-25 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
11.1 aluminium conductor cable of 1.1 KV grade as required.
Digitally signed by ₹PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty)
5 MR armoured electrical power cable with aluminium conductor for working voltage
upto 1.1 KV as required.
SUBHEAD :7 TELECOMMUNICATION
Supplying and fixing following modular switch/ socket on the existing modular
1 1.24 plate & switch box including connections but excluding modular plate etc. as
Supplying and fixing following size/ modules, GI box alongwith modular base &
cover plate for modular switches in recess etc. as required
Supplying and fixing of following sizes of medium class PVC conduit along with
4 1.21 accessories in surface/recess including cutting the wall and making good the same
in case of recessed conduit as required
SUBHEAD 8 - DATA
Supplying, Installation, Testing and commissioning of CAT6A Copper Information
Outlet (IO) with face plate of color as per site requirement, should have ETL/UL
6 verification program certificate for compliance with ANSI/TIA-568.2-D. All copper EACH 6 ₹ 302.00 ₹ 1,812.00 ₹ 1,812.00
Cable and Components should be from same OEM to maintain compatibility and
interoperability etc. complete as required.
Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid
copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum,
Horizontal (solid) Cable suitable for high speed data networking application
supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs
DSR-25 (UTP) cable with color coded insulation for easy indentification should have
39.18 FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC
61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE
802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be
7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete
SUBHEAD 9: UPS WITH BATTERY
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying, installation, Testing & Commissioning of following capacity at full load
(Unity Power Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to
95%, Online double conversion true sine wave Uninterrupted hot swapable (allow
for the replacement or addition of battery modules without shutting down the
entire system) modular Power Supply (UPS) system with N+1 modules (N denotes
total number of modules required for rated capacity). The UPS shall include a
Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH
capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup
time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass
switch along with provision for manual bypass, suitable isolation transformer for
additional protection against neutral faults etc. UPS shall have inbuilt phase
sequence correction. The UPS systems offered are to be of the latest technology
with Digital Control Microprocessor based for reliable operation using Insulated
DSR-25 Gate Bipolar
26.2 Transistor (IGBT)'s both for the rectifier & inverter
(3 Level) with PWM (Pulse Width Modulation). The
quality of design, manufacturing and inspection
process should confirm to the relevant Inter-national
standards such as IEC/EN/VDE. The operating
efficiency of the UPS systems shall be >96% while
operating on battery mode and delivering quality
power to the 100% non-linear loads. Current total
harmonic effect(ITHD) on the input grid shall be <
5% at 50 %load. (The required LC ( inductor (L) and
a capacitor (C)) filters shall be included in UPS
cost), extreme power factor kit to be included to limit the input power factor (PF)
to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva
1 ), however UPS shall
Power module be suitable
shall to take load at 0.7 laging to 0.7 leading
SUBHEAD 10: MV PANELS
N-DSR MAIN PANEL-Suppling and fixing wall/floor mounted cubical panel board,
fabricated with 18 gauge iron sheet, suitable for panel mounted switch
disconnector, including bus bar chamber, insulator and painting etc as
required.includes following
160A, 36 KA, FPMCCB, digital multimeter, Voltmeter & ammeter,CT coil and RYB
1.1.1 pilot indictor,four pole ON-load panel mounted changeover switches of capacity
160A, 200amps, 415 V heavy duty three phase with neutral busbar chamber
pole MCCB 100A, 16 KA, TPMCCB with thermomagnetic release and terminal
spreaders , 240/415 volts, "C" curve, miniature circuit of 40A to 63A TP&N
The switchboard shall be complete with all inter connections, risers, internal
wiring, labels etc complete as required
Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying, Installation, Testing & Commissioning of
Modular type Variable Refrigerant Flow/Variable
Refrigerant Volume air cooled Outdoor units suitable for
cooling/heating having 100% hermetically sealed inverter
type twin Rotary/Scroll Compressor(s),minimum two
compressors (with individual separate PCB) for above
14HP modules, microprocessor based Controller, top
discharge type condensing unit(s), with R-410-A
Refrigerant or equivalent, vibration Isolators with suitable
foundation etc. complete as required. To have better
efficiency condenser fan shall be capable to operate at
different speed with respect to load.The unit shall deliver
the rated capacity and in confirmation as per IS
18728:2024 and CPWD Specifications and work even at
50°C ambient temperature without tripping. The system
shall be able to deliver 100% of the rated capacity upto 39
°C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power
supply and BMS compatible. The
unit shall be filled with first charge of the refrigerant and
ready for use as required. The condenser should be coated
with a hydrophilic film to prevent water accumulation on the
surface of the heat exchanger, enhance water dispersion,
and reduce the risk of degradation, thereby improving
overall performance and durability. The Indian Seasonal
Energy Efficiency Ratio (ISEER) of the unit shall be as per
Energy Conservation and Sustainable Building Code
(ECSBC) 2024 as below and complete as per CPWD
specification, connections, inter connections etc. as
For Cooling Heating or Both
Supplying, Installation, Testing and Commissioning of
following minimum capacity and external static pressure
VRF/VRV ceiling mounted mid static ductable type Indoor
unit equipped with washable synthetic media pre-filter, fan
section with low noise fan/dynamically balanced blower,
multispeed motor, coil section with DX copper coil,
electronic expansion valve, corded remote control, outer
cabinet, vibration Isolators, drain pan, drain pump, other
necessary supports etc., suitable for operation on single
phase AC supply 230 V ± 10%, 50 Hz complete as
required. The Indoor units must shut down upon receiving
a singal from the BMS System/Fire Singnals. The cooling
capacity of indoor unit will be at air inlet conditions of 27 0C
DB and 19 0C WB temperature. (Make will be same as of
Outdoor) Mid static ductable units (minimum 30 to 48 pascal external
static pressure) Digitally signed by PRIYA
SOR ITEMS NON-SOR ITEMS
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
SL. NO. DESCRIPTION UNIT QTY TOTAL AMOUNT
MR RATE AMOUNT RATE AMOUNT
Supplying, Installation, testing and commissioning including
vaccumiazation and Nitrogen testing of following nominal
sizes of soft/hard drawn copper refrigerant piping for
VRV/VRF system, complete with fittings, with suitable
adjustable ring type hanger supports, jointing/brazing
including accessories, insulated with XPLE Class-O tubular
insulation/with Class-O closed cell elastometric nitrile
rubber tubular sleeves sections of 19 mm thick insulation
as given below for Suction and Liquid lines, all accessories
as per specifications etc. as required :
31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 100 487.00 48,700.00 ₹ 48,700.00
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2
TOTAL COST FOR ELECTRICAL WORKS OF AUDITORIUM ₹ 27,61,300.00 ₹ 2,13,368.00 ₹ 29,74,668.00
Digitally signed by PRIYA
ABSTRACT OF COST FOR
WATER SUPPLY & SANITARY INSTALLATION WORK
DSR ITEM NDSR ITEM
DSR-2023 Amount
S. NO. Item of Work Quantity Unit Rate (Rs.) Amount (Rs.) Rate (Rs.)
Providing and fixing on wall face unplastidsed-
PVC(working pressure 4 kgf per sqm) rain water pipes
1 conforming to IS :4985 including jointing with seal ring
conforming to IS: 5382 leaving 10 mm gap for thermal
Providing and fixing on wall face unplasticised -PVC
molded fittings/accessories for unplasticised-PVC rain
2 12.42 water pipes conforming to (S:4985 including jointing
with seal ring conforming to IS: 5382 leaving 10 mm gap
for thermal expansion
12.42.3.2 Single tee with door 110x110x110mm 6.00 Each 234.15 1,405.00
12.42.6.2 Shoe plain 110 mm shoe 6.00 Each 131.85 791.00
Providing and fixing unplasticised -PVC pipe clip of
approved design to unplasticised PVC rain water pipe by
GI Clip of width 50 mm with SS Screw all in cn complete
17.30 Providing and fixing white vitreous china pedestal type
water closet (European type) with seat and lid, 10 litre
low level white vitreous china flushing cistern & C.P.
flush bend with fittings & C.I. brackets, 40 mm flush
bend, overflow arrangement with specials of standard
4 make and mosquito proof coupling of approved
municipal design complete, including painting of fittings
and brackets, cutting and making good the walls and
floors wherever required
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid 13 Each 8,006.60 1,04,086.00
Providing and fixing white vitreous china flat back half
stall urinal of size 580x380x350 mm with white PVC
automatic flushing cistern,with fittings, standard size
5 17.4 C.P. brass lush pipe, spreaders with unions and clamps
(all in C.P. brass) with waste fitting as per IS :2556, C.I.
trap with outlet grating and other couplings in C.P. brass,
including painting of fittings and cutting and making
good the walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern
Providing and fixing wash basin with C.I. brackets, 15
mm C.P. brass pillar taps, 32 mm C.P. brass waste of
6 17.7 standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever
White Vitreous China Flat back wash basin size 630x 450
17.7.1 mm with single 15 mm C.P. brass pillar tap 9.00 Each 23,840.00
MR SS health Faucets of 1 meter length with bidet sprayers
Providing and fixing P.V.C. waste pipe for sink or wash
7 17.28 basin including P.V.C. waste fittings complete.
17.28.1.1 Semi rigid pipe 32 mm dia 9.00 Each 103.90 935.00
Providing and fixing mirror of superior glass (of
approved quality) and of required shape and size with
plastic moulded frame of approved make
and shade with 6 mm thick hard board backin
17.32.2 Rectangular shape 453x357 mm 8.00 Each 1,361.80 10,894.00
Providing and fixing PTMT Waste Coupling for wash
basin and sink,of approved quality and colour.
Waste coupling 31 mm dia of 79 mm length and 62mm
breadth weighing not less than 45 gms
Providing and fixing PTMT Bottle Trap for Wash basin
Providing and fixing SS liquid soap container 109 mm
wide, 125mm high and 112mm distance from wall of
standard shape with bracket of the same materials with
11 17.71 snap fittings of approved quality colour and make, 4.00 Each 470.00 1,880.00
weighing not less than 105gms.
Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded
12 18.8 fittings, including fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with
one step CPVC solvent cement and testing of joints
complete as per direction of Engineer in Charge.
18.8.1 (a) 15mm nominal outer dia Pipes 35.00 M 497.80 17,423.00
Providing and fixing C.P. brass bib cock of approved
quality conforming to IS:8931 :-15 mm nominal bore
Providing and fixing C.P. brass stop cock (concealed) of
14 18.52 standard design and of approved make conforming to
18.52.1 15 mm nominal bore 20 Each 670.45 13,409.00
Providing and fixing C.P. brass angle valve for basin
15 18.53 mixer and geyser points of approved quality conforming
to IS:8931 a) 15 mm nominal bore
18.53.1 15 mm nominal bore 18 Each 574.30 10,337.00
Multiply GST Factor(.973) 2,85,161.98
Digitally signed by PRIYA
Name of Work: RENOVATION & INTERIOR WORK IN START-UP INCUBATION CENTRE AT CIMP, PATNA
SUMMARY OF COST-INCUBATION CENTRE
Sl No. DSR/N-DSR Sub - Head QTY Unit RATE Amount
Supplying, testing, commissioning and obtaining all
necessary statutory approvals of one fully built bus having
seating capacity of 41 passengers + Driver + Attendant
(41+A+D), equipped with a minimum 3500 cc engine
capacity, conforming to BS-VI (BS6) emission norms,
suitable and fully compatible for operation on Compressed
Natural Gas (CNG) fuel. The bus shall be complete with all
standard fittings, safety features, fire extinguishers, first-
aid box, emergency exits, LED destination display, GPS
1 N-DSR tracking system, passenger grab handles, comfortable 1 Each 32,00,000.00 32,00,000.00
seating, and other accessories as per applicable CMVR/AIS
standards and requirements of the transport authorities.
The item includes supply, transportation, insurance,
registration, testing, commissioning, roadworthiness
certification, and handing over in complete working
Digitally signed by PRIYA
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT 184.pdf
Tender Document
2 BOQ.pdf
Tender Document
3 SCC.pdf
Tender Document
4 Presigned Integrity Pact.pdf
Tender Document
5 Physical Milestone.pdf
Tender Document
6 GCC PMC 2026 Contractor .pdf
Tender Document
7 Technical Circulars_1_to_33.pdf
Tender Document
8 Drawings.pdf
Tender Document
9 SCOPE OF WORK CIMP.pdf
Tender Document
10 List of Approved Make.pdf
Tender Document
Download all tender documents and submit your bid