Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrAccepted-Finance C O GUPTA EMPORIUM A R BAZAR HAPPY VALLEY SHILLONG 793007 | EAST KHASI HILLS | MEGHALAYA | 793007 | ₹1.5 Cr | L1 | Accepted-Finance L1 bidder |
| 2 | L2₹1.6 CrRejected-Finance DEEDAR MARKET ROOM NO UB 12 POLICE BAZAR SHILLONG 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | ₹1.6 Cr | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹1.9 CrRejected-Finance C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | ₹1.9 Cr | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | H K Enterprise L2 | M/S UTTAM SAHA L1 | S K Construction L3 |
|---|---|---|---|---|---|---|
| 0.00NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates. | ||||||
| 1.00Schedule 'A' Part-IA(BUILDING WORKS (TO BE QUOTED BY BIDDERS)) | ||||||
| 1.00 | Construction of OR institute with permanent specification complete all as shown on drawings, as specified and as directed. | 1 | EACH BLOCK | 1,27,10,800 ₹1.3 Cr | 1,14,00,000 ₹1.1 Cr | 1,55,00,000 ₹1.6 Cr |
| 2.00 | Lump sum price worked out by the tenderer for OPEN PARKING SHED WITH HARDSTANDING (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-IB(Ref pre-priced schedule attached separately) | 1 | Lump Sum | 13,21,300 ₹13.2 L | 11,15,480 ₹11.2 L | 13,60,000 ₹13.6 L |
| 3.00 | Lump sum price worked out by the tenderer for FIRE POINT (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-IC(Ref pre-priced schedule attached separately) | 1 | Lump Sum | 11,122 ₹11,122 | 15,000 ₹15,000 | 12,000 ₹12,000 |
| 4.00 | Lump sum price worked out by the tenderer for SITE CLEARANCE, SITE DEVELOPMENT AND EARTHWORK (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-II(Ref pre-priced schedule attached separately) | 1 | Lump Sum | 1,62,528 ₹1.6 L | 1,20,000 ₹1.2 L | 1,10,000 ₹1.1 L |
| 5.00 | Lump sum price worked out by the tenderer for INTERNAL ELECTRIFICATION (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-III(Ref pre-priced schedule attached separately) | 1 | Lump Sum | 3,55,600 ₹3.6 L | 4,10,000 ₹4.1 L | 4,10,000 ₹4.1 L |
| 6.00 | Lump sum price worked out by the tenderer for INTERNAL WATER SUPPLY (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-IV(Ref pre-priced schedule attached separately) | 1 | Lump Sum | 1,00,700 ₹1.0 L | 74,776.33 ₹74,776.33 | 90,776.33 ₹90,776.33 |
| 7.00 | Lump sum price worked out by the tenderer for ROAD, PATH AND CULVERT (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-V(Ref pre-priced schedule attached separately) | 1 | Lump Sum | 2,16,212 ₹2.2 L | 2,10,000 ₹2.1 L | 2,00,000 ₹2 L |
| 8.00 | Lump sum price worked out by the tenderer for EXTERNAL WATER SUPPLY (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-VI(Ref pre-priced schedule attached separately) | 1 | Lump Sum | 1,65,400 ₹1.7 L | 1,70,000 ₹1.7 L | 1,70,000 ₹1.7 L |
Updated dates
Tender Value
₹1.3 Cr
EMD Value
₹2.0 L
Closing Date
6 Mar 2026, 6:00 pmClosed
CWE Shillong
HQ CWE Shillong, SE-Falls Shillong -793011
PROVN OF OR INSTITUTE INCLUDING ALLIED SERVICES AT SHILLONG UNDER GE SHILLONG
2025_MES_731845_3
8932/SHL/E8
Open Tender
Civil Works
365 days
Shillong
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE Shillong
₹2.0 L
Yes
19 Jun 2026
6 Feb 2026
9 Mar 2026
6 Feb 2026
6 Mar 2026
20 Feb 2026
NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.
Schedule 'A' Part-IA(BUILDING WORKS (TO BE QUOTED BY BIDDERS))
Construction of OR institute with permanent specification complete all as shown on drawings, as specified and as directed.
Lump sum price worked out by the tenderer for OPEN PARKING SHED WITH HARDSTANDING (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-IB(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for FIRE POINT (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-IC(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for SITE CLEARANCE, SITE DEVELOPMENT AND EARTHWORK (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-II(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for INTERNAL ELECTRIFICATION (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-III(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for INTERNAL WATER SUPPLY (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-IV(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for ROAD, PATH AND CULVERT (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-V(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for EXTERNAL WATER SUPPLY (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-VI(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-VII(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for SEWAGE DISPOSAL (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-VIII(Ref pre-priced schedule attached separately)
Lump sum price worked out by the tenderer for STEEL GATE (PRE PRICED BY MES) as listed in Schedule ‘A’ Part-IX(Ref pre-priced schedule attached separately)
Schedule 'A' Part-X (MISCLLANEOUS ITEMS (TO BE QUOTED BY BIDDERS))
S&F of 18 watt LED light fittting surface mounting fixtures (square type) LED panel with premium diffuser to ensure glare free and even light distribution connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and directed.
S&F of 28 watt LED light fittting surface mounting fixtures (square type) LED panel with premium diffuser to ensure glare free and even light distribution connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and directed.
S&F of LED Bldg Security Light Fittings of capacity 20-25 watt made up of die cast aluminium housing with black epoxy powder powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 Nos 8mm dia bolts with nuts and washer and suitable reducer for connecting fitting to Gl pipe as required at site including two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work complete all as specified and as directed.
S & F double door MCB Distribution board of sheet metal enclosure, triple pole and neutral, 4 way vertical with 200 Amps rated bus bar, 415 volt, IP42 protection grade and fixed with MS hold fast and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
Supply and fix sheet metal enclosure Vertical triple pole & neutral(VTPN) IP-54 with MCCB 100 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface complete all as specified and as directed.
Supply and fixing 7.5 watt LED smart spot light fitting, low glare and surface mounting fixture LED panel with premium diffuser to ensure glare free and even light distribution connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed.
Supply and fixing 40 watt LED smart hanging pendant light fitting, low glare hanging type with premium diffuser to ensure glare free and even light distribution connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed.
S & F 15 mm dia two way bib cock, 15 mm dia with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed.
S & F angular stop cock 15 mm dia with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed.
S & F urinal spreader fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed.
Supply & Fixing junction box in repair made of polycarbonate with dust proof, water tight, light weight, acid resistant, corrosion proof inslated & shock proof, fire retardant, self extinguishing, halogen & silica free non-toxic material, UV resistant, with internally ebbedded gasket fitted with required connector/terminals for upto size 25 sqmm 4 core cable and with openable front including Glands and with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fitting if required at site and provisioning of 1.5 sqmm 3.0 core flexible PVC insulated copper cable from junction box to connector of street light complete all as speciifed and directed
S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 100, made of polyethylene (PE) material conforming to per IS 16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS 16098 (Part 2):2013 complete all as specified and as directed.
M & L for construction of RCC septic tank for 30 users as per drawing No. CESZ/2020/STD-02 sheet Nos 1/2 and 2/2 dated 28 Apr 2020 (Drawing of Chief Engineer Shillong Zone) including necessary earth work in any type of soil, PCC lean concrete in M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in base concrete, RCC M 30(Design Mix) using 20 mm graded crushed stone aggregate as in footings, walls, baffle wall, band, slab, manhole cover in precast RCC M-25 (Design Mix), reinforcement, cast iron steps (rungs), pattern 2 (minimum weight 5.3 kg), PCC benching in M10(Nominal Mix) using 20 mm nominal size coarse aggregate, coated with two coats of tar finish as per IS 5455: 1969, inlet and outlet pipe of cast iron of 150 mm nominal dia as per IS 1729: 2002 and length upto 4 metre each, PVC vent pipe of 110 mm dia and 2.5 metre length, type B as per IS 13592: 2013 and vent cowl of nominal dia 110 mm as per IS 14735: 1999, reinforcement of grade as specified, other structural details as per drawings and specifications including moorum filling complete all as specified and as directed.
M & L for construction of soakage well of size (1.2 metre dia X 3.0 metre effective depth) as per drawing No. CESZ/TD/502 sheet Nos 1/1(Drawing of Chief Engineer Shillong Zone) including necessary earth work in any type of soil, PCC lean concrete in M 10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in foundation, RCC M25(Design Mix) using 20 mm graded crushed stone aggregate as in slab, manhole cover in precast RCC M-25 (Design Mix), PCC band in M10(Nominal Mix) using 20 mm nominal size coarse aggregate, honeycomb brickwork in cement mortar (1:4), inlet pipe of cast iron of 150 mm nominal dia as per IS 1729: 2002 and length upto 4 metre each, reinforcement of grade as specified, other structural details as per drawings and specifications, loose filling in layers with brick bats of gauge 80 mm to 150 mm in bottom layer and of gauge 40 mm to 80 mm in top layer complete all as specified and as directed.
S & F 3 mm thick plain laminated fibre reinforced polymerized sheet in steel structural framing with screw up to a depth of 50 mm and screwed with nut bolt complete all as specified and directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.65 MB
8932TENDER3.pdf
Tender Documents • 2.10 MB
BOQ_841819.xls
BOQ • 0.32 MB
SCHEDULES.pdf
Tender Documents • 0.17 MB
DRAWINGS.pdf
Tender Documents • 8.84 MB
Download all tender documents and submit your bid