Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.0 L+₹3.6 L (9.90%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹40.5 L+₹4.2 L (11.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹42.2 L+₹5.8 L (16.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹81,600
Closing Date
3 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
SPL REPAIR TO BLDG NO T-20, T-30 AND PROVN OF CERTAIN SANCTIONED WORKS UNDER AGE B/R-II AT ALWAR
2023_MES_608056_1
8186/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹81,600
Yes
6 Sept 2023
5 Jul 2023
5 Aug 2023
5 Jul 2023
3 Aug 2023
20 Jul 2023
5 Jul 2023 - 19 Jul 2023
Amount
Excavation in trenches not exceeding 1.50m wide and not exc 1.50m in depth and getting out in any type of soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing surplus excavated soil to a distance n.exc 50 metre and n.exc 100 metre and depositing where directed at a level n.exc 1.5 m above the stafrting point.
M&L PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in foundation and mass concrete complete all as specified and directed.
M&L RCC type B-1, 1:2:4 using 20mm graded stone aggregate in foundation including footing, plinth beam, base for column etc complete all as specified and directed.
M&L RCC type B-1, 1:2:4 using 20mm graded stone aggregate in for columns, pillars, piers, posts and struts etc complete all as specified and directed.
M&L RCC type B-1, 1:2:4 using 20mm graded stone aggregate in for beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified and directed.
M&L RCC type B1, 1:2:4 using 20mm graded stone aggregate in for slabs sopported on walls ,beams and columns in floor s ,roofs etc complete all as specified and directed.
M&L RCC type B1, 1:2:4 using 20mm graded stone aggregate in for lintel including Chajjas etc complete all as specified and as directed.
M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
All as per item No 10.00 above but 5mm to 10mm dia as in stirrups, spacers binders etc.
M&L form work to edges of concrete flats n.exc 12cm wide complete all as specified and directed.
M&L form work to side of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.
M&L form work to side of pillar posts struts piers columns etc complete all as specified and directed.
M&L form work to sides and soffits of floor or roof beam, lintle beam nauching, griders, bressum-mers lintels cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc complete all as specified and directed.
M&L form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick(Horizonal or sloping)
M&L form work to cullaah hoods, chajjas, throughs and similar items including edges complete all as specified and directed.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and directed. (Area of the sub structure in contact with backfill to be measured).
Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L 15mm thick screed bed on fair faces of concrete/ brick surfaces in CM 1:4 with water proofing compound @ 3 % of wt of cement finished even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified. (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after).
Supply only integral water proofing compound.
M&L water proofing treatement to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. NOTE : Bituminous primer shall be manufactured by M/S STP Ltd or 'EMW FLATE' M/S Texas India Ltd (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 150 gms per sqm polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flushing.
M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.
M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius half brick thick wall built cement mortar 1:4 complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick work surface rendering is to be even and smooth with out using extra cement with integral water proofing compound finished with even and smooth complete all as specified and directed. (Note : WPC shall be measured and paid separately under relevant item of this schedule).
M&L 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed.
M&L rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.
M&L rendering 5 mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L preparation of newly plasterd surface of wall and applying two coats cement base paint over a coat of primer complete all as specified and directed.
M&L preparation of newly plastered surfaces & applying three coat of white wash on walls complete all as specified and directed.
M&L preparation of newly plastered surfaces & applying three coat of white wash on ceiling complete all as specified and directed.
S&F aluminium powder coated (thickness of powder coating not less than 50 micron) as in ventilators half fixed with 4mm glass and half louvers with clips of 4mm glass 100mm wide type of frame size 104mm x 5.60mm thickness 3 mm, weight per kg /mtr 1.705 and one mosquito proof shutter frame size 44.50mm x 25mm thickness1.40mm and weightr kg/mtr 0.560.single leaf cut to size, jointed galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm together with cadium plated steel screwes including rubber packing aluminium beading or gasket for aluminium section for fixing of glass sheet and wire cloth necessary fittings complete screwews plugs complete all as directed. Note : Aluminium frame, shutter, glass, wire cloth, louvered and accessories are included in above description.
M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in sub base of as floor complete all as specified and directed.
M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 in floors etc. laid over 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick over 10 mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement. 6 mm thick joint shall be left between panls and wall and filled with bitumen mastic complete all as specified and as directed.
S&F factory made solid PVC moulded doorshutters 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long complete all as specified and directed.
S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.
S&F extruded aluminium alloy handles 150mm size fabricated type anodized ISI marked complete all as specified and directed.
S&F vitreous china squatting pan of Orrisa pattern size 580mm x 440mm white with integral foot rest including P trap (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding fixed complete all as specified and directed.
S&F vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe incuding seat cover and Jet) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed.
S&F PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked complete all as specified and directed.
S&F steel water tubes medium grade 'galvanised' with and including all fitting and fixed bore of 20 mm dia complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F steel water tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair 15mm dia stop valve/angle valve of cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union complete all as specified and directed.
S&F 15mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.
S&F vitreous china urinal half stall type white excluding flushing cistern, but including CP urinal spreader and waste pipe complete all as specified and directed.
S&F vitreous china urinal partition white of size 310mm x 700mm including all fitting accessory all as directed.
S&F waste coupling of PTMT (half or full threaded) (Minimum weight gms/40mm-60 gms) for Wash Hand Basin complete all as specified and directed.
S&F waste coupling of PTMT (half or full threaded)but suitable for urinals, (Minimum weight 45 gms complete all as specified and directed.
S&F WHB flat back of size 580mm x 450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete all as specified and directed.
S&F 15mm dia bore cast copper alloy chromium plated fancy type pillar tap for with out cold & hot water complete all specified and as directed.
S&F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm float valeve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges.
S&F PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe.
S&F PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall complete all as specified and directed.
S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified and directed.
S&F PVC (SWR) bend 75mm bore of any radius complete all as specified and directed.
S&F PVC (SWR) bend 110mm bore of any radius complete all as specified and directed.
S&F PVC (SWR) 110mm Branch piece (single Y) equal or unequal complete all as specified and directed.
S&F 110mm size of PVC(SWR) Vent Cowl complete all as specified and directed.
M&L cutting into existing manholes for connecting new drains,of 150mm making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required all as specified.
M&L precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, of any thickness, size or shape including necessary form work, set and jointed in cement mortor (1:4) complete all as specified and directed.
S&F stack clamps for 100mm dia pipe made out of 50mm x 5mm flat iron & 16mm dia round iron stays, incl nuts & bolts & securing ends of stays to wall & roof complete all as specified and directed.
Extra for forming fair finished drain or channel up to 30 cm inner girth in cement concerete, using extra cement including forms/moulds/mitred stopped ends etc complete all as specified and as directed.
M&L treating the bottom and side of exc at the rate 5 ltr/sqm emulsion (ATT) of surface area.
M&L prepration of new plastered surfaces & providing two coats of distemper oil emulsion complete all as specified and directed.
S&F 35mm thiak factory made plain framed panel shutter of 2nd class hard wood with two panel with commercial ply wood face veeners or decorative face veeners, seasoned nd chemically treated complete all as specifed and directed.
M&L factory made 2nd class glazed and skelton door shutter made out of stiles & rails of 35mm thick 2nd class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain,chamfered of rounded, fitted with and mitred beads for securing glass etc compelte, the size of members of shutter shall be as per IS-1003. The shutter shall be fitted to the chowkhats as directed.
M&L framed work as in doors or gates angle or other covering door, cooler stand etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging dor fittings (exclusIve of steel or othr covering, running rails and guides) and hanging also fastening and fixing complete conforming to FE-290 Gde E-165 complete all as specified and directed.
M&L preparation of new wooden surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over a one coat of pink primer complete all as specified and as directed.
M&L preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.
S&F extruded aluminium alloy handles 150mm size fabricated type anodized ISI marked complete all as specified and directed.
S&F exctruted aluminum alloy with galavanisied mild steel hing pin butt hinges 100mm long complete all as specified and directed.
S&F retractable door hinge including all the necessary screws and welding for fixing and including all the activities to make the door workable comlete as directed. Make :- Hettich or equilent as approved by GE.
S&F aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed.
S&F powder coated aluinium window having three track section 92mm x 31.75mm shutter section 40mm x 18mm mounted on bearing to slide on track plain anodised of approved colour including S&F of 5 mm thick frosted/ plain glass and wire esh with glazing clip, pvc track gasket, EPDM rubber gasket on glass of weather tightening alongwith recessed type handle and lock including sealing gap with marble /granite surface with silicon sealent aking it water proof in all manner complete all as specified and directed.
M&L 20-25mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm screed bed or bedding layer in CM 1:3 complete all as specified and directed.
M&L coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M35 grade and grey cement and pigment for berms laid over and inckluding 20 mm thick layer of sand complete all as specified and directed.
Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed.
Dismentling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
Dismantling of wooden framed truss n exe 10m span complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position i.e perlins, post etc complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L demolition of concrete (unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.
M&L false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted 'Tee' or 'L' section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified. (a) Size of grid - 610 x 610 mm. (b) Size of main Tee – 39 x 24.70 x 0.80 mm. (c) Size of cross Tee – 39 x 24.70 x 0.80 mm. (d) Size of wall angle – 22.20 x 22.20 x 0.65 mm.
M&L roof trusses (framed), Fe 410 -W (GdeE- 250) quality-A /squre of hollow section trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including one shop coat of primer complete all as specified and directed.
S&F plates (Plain or chequered ) Chanels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
M&L mild steel screwe bolts (machine made) 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm long but n.exc 30cm long and dia of neck not less than 11mm to 15 mm complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.
M&L hardcore of gauge (broken bricks) n.exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90cm complete all as specified and directed.
M&L reinforced cement concrete Type B1 1:2:4 using 20mm graded stone aggregate in for lintel bend, roof bend, gable bend etc including necessary form work complete all as specified and directed.
M&L machine cut Kota stone slab flooring 20 to 25mm thick as in floor,cooking platform, treads etc .Including laid over 20 mm screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing by machine complete all as specified and directed.
M&L machine cut Kota stone 16-18 mm thick as in riser of steps, skirting, dado and pillar set over 10 mm rendering in CM 1:3 and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 but each complete all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but n exc 4 sqm each complete all as specified & directed.
S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates incl joining cleat for fixing etc complete all as specified & as directed.
S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos), suitable handle (1 No) complete all as specified & as directed.
S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.36 mm and fixed with tinned tacks, or galvanised wire staples to wooden frames with beading complete all as specified & directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, with vulcanised rubber piece complete all as specified and directed.
S&F powder coated aluminium anodised grill with minimum anodic coating of grade AC 15 of approved design / pattern with approved standard section and fixed to the windows frame with CP brass/stainless steel screws @ 200C/C and U channel where required including cutting the grill in proper size for fixing and operation of handles complete all as specified and directed.
Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed.
M&L cement cocnrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection 75mm thick and surface to be finished even and smooth without using extra cement in panels n exe 1.5 Sqm each . 6 mm wide joint will be left between panels and wall of the bldg. The joint will be filled with bitumen mastic complete all as specified and directed.
S&F in repair stainless steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed.
M&L heavy duty exterior grade 10mm thick vitrified textured finish colour tiles of size 400mm x 400 mm area of each tiles set and jointed in neat cement slurry in floor and pointed in colour cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick 1:6 complete all as specified and as directed. Make jhonson endure or equivalent.
M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating as directed.
M&L providing Post Construction Antitermite Treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per linear metre including drilling and plugging holes etc in apron with cement mortar 1:2 (1 cement 2 coarse sand) complete all as specified and as directed.
M&L anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed.
M&L anti termite treatment of voids in masonry, using emulsion @ one litre per holes at 300 mm intervals, including drilling holes at 45 degree and plugging them cement mortar 1:2 (1 cement 2 coarse sand ) complete all as specified and as directed.
S&F peg set of six long ms powder coated complete all as specified and as directed.
M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint. If required putty will be paid separately complete all as specified and as directed.
M&L preparation of new plastered surfaces & providing two coats of distemper oil emulsion complete all as specified and directed.
M&L applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface /Previously treated surface after complete removal existing treatment.
M&L applying cement base wall care putty of 1 mm thickness over old/new plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L cutting holes in brick wall built in CM for inserting holdfast and making goood dismentled portion in cement concrete 1:2:4, n.exe half brick complete all as specified.
Dismantling of stone slabs and tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified & directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and directed.
M&L cement concrete 1:3:6, type C2 (using 20mm graded stone aggregate) as in surface channels and drains all as specified and as directed.
M&L rendering 10mm thick in cement mortar 1:4 on fair faces of brick walls or concrete surfaces complete all as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 75mm bore for weep holes to drain complete all as directed.
M&L reinforced concrete pipes, class NP2, laid and jointed complete with collars 300 mm bore pipe complete all as specified and as directed.
M&L reinforced concrete pipes, class NP2, laid and jointed complete with collars 150 mm bore pipe complete all as specified and as directed.
M&L cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as bed to drain pipe including in packing under and haunching against sides of pipes after they are laid and tested in complete all as specified for 150mm dia pipes.
M&L cement concrete (1:4:8) type D-2 (using 40mm graded stone agg) as bed to drain pipe including in packing under and haunching against sides of pipes after they are laid and tested in complete all as specified for 300mm dia pipes.
M&L factory made 60mm thick pre polished machine pressed/vibration moulded precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed.Note : Sand cushioning will be measured and paid for separately.
All as per item No 138.00 here-in-above but except interlocking paving blocks i.e. using old interlocking paving blocks obtained from dismantling under serial item No. 1.00 here-in-before laid over 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed. Note : Sand cushioning will be measured and paid for separately.
Supply and laying of sand including spreading levelling watering and well ramming in layers n.exc 25 cm in each layer complete all as specified & directed.
M&L preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer complete as specified and directed.
M&L cutting to existing bitumionous road for laying RCC hume pipe/drain and making good as per road specification complete all as specified and directed.
Taking down carefully copper/aluminium point wiring for one light /socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.
M&L point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.
All as per serial item No 140.00 here-in-before but for one fan point controlled by one switch and regulator.
All as per serial item No 140.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.
All as per serial item No 140.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No 140.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No 140.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.
S&F stepped type electronic fan regulator, flush type and connecting up ISI marked 240 volts complete all as specified & directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.
S&F LED type street DRACO SERIES light luminaire 20 Watt, 230 Volts, 50 Hz including all necessary fitting accessories and LED complete all as directed. Make : C&S Cat Part LTESS20WLED or equivalent of Crompton Greaves/Wipro
S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.
S&F LED bulb 10/11 watt complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 4 way, 240 volts complete all as specified and directed.
S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed.
S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.
S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug(4 Nos), complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable.(ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.
S&F exhaust fan 300mm sweep 240V AC including provision of hole in wall of suitable size and necessary electric connection complete all as directed. Make : Havells/Crompton/Bajaj/Orient.
S&F ceiling fan 5 star rating 1200mm sweep 240V AC including provision of hook in ceiling of suitable size and necessary electric connection complete all as directed. Make : Havells/Crompton/Bajaj/Orient.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
M/s R P Enterprises
M/S GAURI CONSTRUCTION
M/s S Amarjit Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .