Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical 19 A GOODWILL TIMBER INDUSTRIE PLOT NO 19 A SSI AREA DHANMANDI KOTA RAJASTHAN 324009 | KOTA | RAJASTHAN | 324009 | Accepted-Technical Technical bid opened and accepted |
| 2 | Accepted-Technical | Accepted-Technical Technical bid opened and accepted |
Tender Value
₹27.8 L
EMD Value
₹55,500
Closing Date
19 May 2026, 6:00 pmClosed
GM RSRDC LTD JAIPUR
GM RSRDC LTD SETU BHAWAN, JHALANA DOONGARI, JAIPUR
Construction of Dias and Judge Chair in Court Complex, Shahpura, Jaipur
2026_RSRDC_558359_1
RSRDCC NIT 081/2026-27 Dated 11.05.2026 Sl No 4
Open Tender
Civil Works - Buildings
Percentage
60 days
Court Complex, Shahpura
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹590
PD RSRDC UNIT IV JAIPUR THROUGH NEFT/RTGS/IMPS
₹55,500
2 Jun 2026
12 May 2026
20 May 2026
12 May 2026
19 May 2026
13 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing making and fixing dias table furniture (Racks & leg supports of dias table) by jointing made of 25mm thick Block board of approved ISI make and laminated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawl plugs etc. edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive ete complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-in- charge (Area of block board will be measured horizontal & vertical for payment). | 321.84 | Sqm | 4,155 | ₹13,37,245.2 |
| 2 | Providing making and fixing dias table furniture (lop of dias table) on rack support made of 35mm thick Block board of approved ISI make and laminated with 1min thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawi plugs etc. all the edges of table top are restored by fixing of moulded teak wood 37x25 mm beading with the help of nails, adhesive etc complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-in-charge (Top plan area of block board will be measured for payment) | 67.2 | Sqm | 4,317 | ₹2,90,102.4 |
| 3 | Providing making & fixing table almirah shutters made of 25mm thick Block board of approved ISI make and laminated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawi plugs ete edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive etc complete with melamine polish for and required stainless steel fittings such as hinges handle, lower bolts, magnet & chains & lock (Godrej make) etc for all sizes as per drawing and the direction of Engineer-in-charge (Area of block board will be measured horizontal & vertical for payment). | 48 | Sqm | 4,704 | ₹2,25,792 |
| 4 | Providing, making and fixing ghana teak wood-grade-I frame for dias with 3"x2" main battens at 60cm c/c spacing, 3"x2" cross battens at 60cm c/c spacing and 3"x3" wooden legs at every junction including antitermite treatment, cost of material and labour completed with all repect as per drawing and the direction of Engineer-in-charge | 3.78 | Cum | 1,28,953 | ₹4,87,442.34 |
| 5 | Providing, making and fixing dias furniture (top and sides) by jointing, made of 25mm thick block board of approved ISI make and laminated with 1mm thick laminated sheet on one side matching with wall panelling shade and design by means of adhesive, nails, screws rawi plugs etc edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive etc complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-In-charge (Area of block board will be measured horizontal & vertical for payment). | 115.2 | Sqm | 3,329 | ₹3,83,500.8 |
| 6 | Supplying and placing of Judge chair made in Ghana Teak wood grade- 1.Seating H 20" x D 21" x 24" and Bracekts H 50" x W 21" with full arms and Handle 3" and Legs 3" with wooden structure. The seat should be made of 18mm MR Grade plywood and back should be made of 12 mm plywood and frame, legs, handle should be of complete sagwan wood with Melamine Polish. The seat Cushion of the chair should be made up of 50mm thick High Density of 40+2 kg.Cub.M and back cushion should be made up of 38mm thick High Density 32+2 kg./cub.M and good quality approved valvet fabric. Including cost of material and labour completed with all repect as per direction of Engineer incharge. | 4 | each | 12,694 | ₹50,776 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
cancelled_1.pdf
pdf • 0.02 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.34 MB
agreement.pdf
Tender Documents • 0.45 MB
AnnexureABCDandRTPPAct.pdf
Tender Documents • 8.80 MB
pd_bank_details.pdf
Tender Documents • 0.64 MB
BOQ_994024.xls
BOQ • 0.28 MB
specialConditions.pdf
Tender Documents • 0.25 MB
various_Circulars_Office_Orders.pdf
Tender Documents • 0.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .