PERIODICAL SERVICES TO CERTAIN BLDGS AT NORTH ZONE UNDER AGE B/R DETT-A OF GE 862 EWS

Amount

M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of colour wash on walls, pillars, cornices etc, complete all as specified and directed.

M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces on walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces on walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of lime white wash on walls, pillars, cornices etc, complete all as specified and directed.

All as per Srl Item No 3 above but on ceiling.

M&L for preparation of old decorated brick/concrete plastered/un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of exterior emulsion weather proof paint, in two or more colour pattern (as approved by GE), complete all as specified and directed.

M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces on walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil emulsion distemper, after filling holes with putty, complete all as specified and directed. (Note : Once the surface is prepared completely, the stage for treatment before applying new treatment shall be approved by Engr-in-Chage)

M&L for preparation of old decorated brick/concrete plastered/un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of exterior emulsion weather proof paint in two or more colour pattern (as approved by GE), complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint on prepared steel surface, complete all as specified and directed.

M&L for preparation of old painted wooden and wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old roof sheet of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint on prepared surface, complete all as specified and directed.

M&L for two coats of synthetic enamel paint on previously untreated steel surfaces including preparation on preprimmed surfaces, complete all as specified and directed.

Complete removal of existing treatment over walls, by using mechanical equipment (electric sander) and perparation of surface to receive the treatment and applying two coats of oil emulsion distemper, complete all as specified and directed. Note : Once the surface is cleared off old treatment completely, the stage for treatment shall be approved by Engr-in-Charge)

Complete removal of existing treatment over ceilings by using mechanical equipment (electric sander) and perparation of surface to receive the treatment and applying two coats of oil emulsion distemper, complete all as specified and directed. Note : Once the surface is cleared off old treatment completely, the stage for treatment shall be approved by Engr-in-Charge)

Complete removal of existing treatment over walls, by using mechanical equipment (electric sander) and perparation of surface to receive the treatment and applying two coats of cement based paint, complete all as specified and directed. Note : Once the surface is cleared off old treatment completely, the stage for treatment shall be approved by Engr-in-Charge)

Complete removal of existing treatment over walls by using mechanical equipment (electric sander) and perparation of surface to receive the treatment and applying two coats of cement base paint, multi colour pattern (two or more colour), complete all as specified and directed. Note : Once teh surface is cleared off old treatment completely, the stage for treatment shall be approved by Engr-in-Charge)

M&L for preparatoin of surfaces of old or new wall surfaces including removal of old treatment and applying 2mm thick layer of plaster of paris, complete all as specified and directed. Note : POP finished surface shall be undulation free and approved by Engr-in-Charge

M&L for preparatoin of surfaces of old or new wall surfaces including removal of old treatment and applying 2mm thick layer of liquified exterior grade putty, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. Note: No extra cost to be borne by the Govt for taking down any No of layers & plaster including over leaping of mosiac, tiles finish etc and scafolding required for execution of work at any height.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surface of facia, finished surface even and smooth without using extra cement, complete all as specified and directed. Note : NO extra cost shall be claimed by contrator in respect of formwork & scafolding at any height upto 03 story and site where plaster is to be executed and same shall be executed in Patches (water proofing compound shall be mixed and measured, paid separately)

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling, finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on brick masonry or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note : NO extra cost shall be claimed by contrator in respect of formwork & scafolding at any height upto 03 story and site where plaster is to be executed and same shall be executed in Patches.

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick masonry or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note : NO extra cost shall be claimed by contrator in respect of formwork & scafolding at any height upto 03 story and site where plaster is to be executed and same shall be executed in Patches.

M&L for rendering 20 mm thick in cement mortar 1:6 on fair faces of stone walls, finished surface even and smooth without using extra cement, complete all as specified and directed. Note : NO extra cost shall be claimed by contrator in respect of formwork & scafolding at any height and site where plaster is to be executed .

M&L for rendering 20 mm thick in cement mortar 1:4 on fair faces of stone walls, finished surface even and smooth without using extra cement, complete all as specified and directed. Note : NO extra cost shall be claimed by contrator in respect of formwork & scafolding at any height upto 03 story and site where plaster is to be executed and same shall be executed in Patches.

M&L for rendering 15 mm thick in cement mortar 1:3 on concrete surface of soffits of slabs, chajja, roof projection etc, finished even and smooth without using extra cement, complete all as specified and directed. Note : NO extra cost shall be claimed by contrator in respect of formwork & scafolding at any height and site where plaster is to be executed.

Supply only liquid water proofing compound confirming to IS, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on walls, pillars, cornices etc and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on ceiling and applying two coat of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall/ ceiling and applying a layer of 2mm thick putty to give a uniform finish as approved by the Engr-in-Charge and required at site, complete all as specified and directed.

M&L for prepartion of new plastered wall surface and applying two coat of exterior weather proof paint in two or more colour pattern (as aproved by GE) over a coats of alkali reisitant primer, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/ steel frames glazed with oil putty or fixed with beads, complete all as specified and directed.

S&F for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50sqm in each pane complete, complete all as specified and directed.

M&L for one coat of black paint for writing letters on surfaces of any description wood, steel, iron, concrete, brick, stone etc exc 10cm width or girth, complete all as specified and directed.

M&L for re-writing and repainting of letter of figures (Block, Roman, Italic or Indian) n. exc 30cm high with synthetic enamel paint of any colour, complete all as specified and directed.

M&L for preparation of old painted wooden and wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic varnish, complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces or previously untreated surfaces including preparation over a coat of pink primer, complete all as specified and directed.

M/S Darshan Kumar (BID ID -3301788)

NATIONAL TRADING COMPANY (BID ID -3307314)

M/S RAJINDER KUMAR (BID ID -3301865)