Loading
Loading…
Loading…
Tender Value
₹2.2 L
EMD Value
₹4,459
Closing Date
25 Aug 2026, 3:00 pmDue tomorrow
Executive Engineer PRI NMA Mayabunder
Office of Executive Engineer PRI NMA Mayabunder
Construction of Fencing around the existing pump house ic Repair of pump house and new pipe line near Mangaldas Ekka at ward No 08 under Gram Panchayat Long Island
2026_RDPRI_24303_1
83/EE/PRI/NMA/MB/26-2027
Open Tender
Civil Works - Others
Works
120 days
Long Island.
Refer Tender Document
5 documents required · 5 mandatory
₹500
Executive Engineer PRI NMA Mayabunder
₹4,459
19 Aug 2026
19 Aug 2026
25 Aug 2026
19 Aug 2026
25 Aug 2026
19 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 1.01 | Electric resistance or induction butt welded tubes | - | Kg | - | - |
| 2Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 3Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work | |||||
| 3.01 | 15 mm dia nominal bore | - | Meter | - | - |
| 3.02 | 25 mm dia nominal bore | - | Meter | - | - |
| 3.03 | 65 mm dia nominal bore | - | Meter | - | - |
| 3.04 | 80 mm dia nominal bore | - | Meter | - | - |
| 4Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | |||||
| 4.01 | 25 mm nominal bore | - | No. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
NIT83GPLaongIsland.pdf
Tender Documents • 3.30 MB
BOQ_25741.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].