Construction of New Bus work shop at Sendurai Panchayat

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Plain cement concrete in C.C.1:4:8 mix using 40mm ISS HBG Metal including cost and conveyance of all materials to site and all charges etc.,

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton

Plain cement concrete in C.C.1:3:6 mix using 20mm ISS HBG Metal including cost and conveyance of all materials to site and all charges etc.,

Towards cost and supply Hollow Tube of size 200mm x 100mm x 6.00mmincluding cost and conveyance and all labours materials to site.

Towards cost and supply Hollow Tube of size 30mm x 30mm x 2.50mmincluding cost and conveyance and all labours materials to site.

Towards cost and supply Hollow Tube of size 80mm x 40mm x 3.00mmincluding cost and conveyance and all labours materials to site.

Supplying and fixing colour coated galvanised sheet for roofing including all labour charges for fixing neccesary bolt, nuts, screws, "J" or "U" bolts etc,

Collection and supply of gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method)

Supplying and fabricating and placing in position Mild steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification

Cement concrete 1:1-1/2:3(One Cement one and a half crushed stone M.Sand and Three hard broken stone jelly) using 20mm gauge hard broken granite stone jelly for all RCC item of works

Provision for Nambe Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information