installation of Solar powe...

Amount

Horizotal drilling with micro tunnelling method

Hydrant assembly for Nakka in field, Rates including Tee, riser pipe, butterfly valve, Flange and labour for fixing butter fly valve should be as per IS 13095-2020 (Rates are as per analysis including HSR item 25.3.6)

Providing, fixing,testing and commissioning of pressure gauge 2` dial with Glycerin filled (N.S. Item)

Providing fixing of Header Assembly/Manifold 3` to connenct the filtration unit (loose) (Rate app. in cada)

Providing and lowering of HDPE floater to float the submersible pump/motor

Supply and jointing of 140 mm 6 Kg/cm2 PE-80 HDPE pipe (for jointing floater, all filters, PRV etc)

Providing, laying, aligning, and jointing with uPVC heavy body solvent at all level/ depths ISI marked uPVC pipe of pressure as per design for raw water supply as per IS 4985 (amended up to date) in trenches in complete, including cost of all Specials, labour, and commissioning as per Technical Specifications and approved make as per direction of Engineer. (Make Duraline, Reliance, jain Irrigation, Nimbus, Finolex, Hasti, or equivalent) (Rate analysed with rate approved by worthy Administrator) 110 mm dia

`Supply Installation testing commissioning of Solar Photovoltaic Stand alone Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength. Including lightning and surge voltage protection, Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required, built in metering system to moniter plant performence (Amp-meter, Volt-meter, Frequency meter, Energy meter, Watt-meter, and other instrument/equipment as required) Note:- PV modules used must qualify to the latest edition of IEC PV module qualification test or equivalent BIS standards Mono Crystalline Silicon Solar Cell Modules IEC 61215/IS14286. In addition, the modules must conform to IEC 61730 Part-1- requirements for construction and Part 2 – requirements for testing, for safety qualification or quivalent IS and be mounted on fixed Aluminium/GI structure of adequate strength and design as per IEC/IS specification. Including field-based electroluminescence (EL) study be performed after receiving the modules at site and after installation. Module mounting structure (MMS) design and drawing shall be duly vetted from government institute Including third party inspection Actual parameters/capacity will be finalized after approval of design and drawing. (N.S. Item)`non schedule

Supplying, erection, testing and commissioning of Variable Frequency Drive (VFD) complete with all accessories for the required power capacity of Solar Pump

Providing and fixing 12 Watt LED Street Lighting of 75 watt solar panel, 12.8 volt 30 Ah Lithium Ferro Phosphate battery, 12 Watt White LED Luminaire and Pole of 5 Meter above ground level with dusk to dawn operation {first 4 hours full light Systemding, fixing and testing of Solar light including battery: min. 24 lux) , rest of the time at lower light (50% Min. 12 lux) level} and 3 days or minimum 36 operating hours autonomy or as per direction of engineer-in-charge

Galvanizes steel chain link both end twisted fence fabric having opening size 7.5x7.5 cm and 3.15 mm dia wire, 2.2 meter height of mesh, with 2.8 meter ht of MS Angle 50x50x5 mm supports fixing at spacing of 3 meter centre to centre, supports with MS Flat 35x5 mm. Fencing supported with MS Angle 35x35x5 at top and bottom. The M.S Angle supports shall be anchored in cement concrete (1:3:6) blocks 45x45x60 cm additional razor barbed wire fencing shall be provided at the top of mesh, fencing including gate

Providing and fixing Tank Type (Make of Metal) Fertilizer and Chemical Injector System confirming to IS 14483 (Part 3) of 2018 for demonstration and guiding the farmers regarding fertilization and chemicalisation of system. (rates include ventury with manifold 1.0`=1300 and 60 liter fertilizer tank= 4400 )

Supplying, erection, testing and commissioning of Solar AC Open-well Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cabling in conduit, required from solar plant to solar pump through control room. for 7.50 HP pump

Construction of control room/regulation cum watch and ward hut as per approved design and drawing Room Size Inner 8x8 feet ,with .75 thick brick work wall,i/c RCC slab .42 th (As per estimate attached)

Complete operation and Maintenance and watch and ward of the project for one year including operation of pump, pipe line, accessories, electromechanical, solar plants complete in all respect of pump house, pipe line and accessories, electromechanical, solar plant etc. complete in all respect for one year

Bidder Name

Amount

Krishan Kumar contractor (GSTN-06AXBPK5232G1ZT) BID ID -1134021

THE OM SAI CO-OP L&C SOCIETY LTD (GSTN-NA) BID ID -1133543

The Safal Coop L/c Society Ltd. (GSTN-NA) BID ID -1134063

THE RAMGARH PANDWAN COOP L/C SOCIETY LTD (GSTN-NA) BID ID -1134130

Krishan Kumar contractor (BID ID -1134021)

THE OM SAI CO-OP L&C SOCIETY LTD (BID ID -1133543)

THE RAMGARH PANDWAN COOP L/C SOCIETY LTD (BID ID -1134130)

THE OM SAI CO-OP L&C SOCIETY LTD (BID ID -1133543)

Krishan Kumar contractor (BID ID -1134021)

The Safal Coop L/c Society Ltd. (BID ID -1134063)