REPAIR TO FLOOR PLASTER VIFT WALL PLINTH PROTECTION STATIC WATER TANK OF BLDG AT MD AND OTM AT DEPOT AND ADM AREA AT 15 FAD JINDRAH UNDER GE ARMY DHAR ROAD

Amount

Demolition of cement concrete (unreinforced) in ground floor, paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement including forming joint to full depth at every 3.0 mtr interval and every change of direction and filled with mixture of bitumen and sand (1:3) by weight complete all as specified and directed

M & L for 100 mm thick cement concrete 1:2:4 type B 1 (20 mm graded aggregate ) as in flooring, including finishing surface even and smooth without using extra cement including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed

M&L for 100 mm thick PCC 1:2:4, type B-1 (20 mm graded aggregate) for floor, finishing the surfaces even and smooth without using extra cement complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces with water proofing compound finished fair and even complete all as specified and directed. (WPC to be measured separately)

Supply only integral water proofing compound complete all as specified and directed.

M & L rendering 10 mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M & L rendering 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete ceiling surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drip moulds and similar work exc 15 cm but not exc 30 cm in widths or girth, including cutting to edges, all mitres and stopped ends etc., complete all as specified and directed

M & L for preparation of new rough cast plastered surface of walls, priming plastered and other surfaces with a coat of alkali resistant priming paint and applying two coats of cement base paint (camouflage pattern) compelete all as specified and directed

M&L for preparation of new or previously untreated surface of any description of wood, steel, iron, concrete, brick, stone etc over 10 cm girth of width not otherwise described, priming with alkali resistant priming paint and applying two coats of fire resisting paint complete all as specified and directed

M&L for preparation of new or previously untreated surface as in ceiling of any description of wood, steel, iron, concrete, brick, stone etc over 10 cm girth of width not otherwise described, priming with alkali resistant priming paint and applying two coats of fire resisting paint complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 etc complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 except stone etc complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:4 but (except bricks) complete all as specified and directed.

M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified and directed.

M&L Providing Cement concrete Type B1 1 : 2 : 4 (20mm graded aggregate) as in roof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.

M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation as cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M & L for machine pressed precast concrete with grey cement and pigment interlocking paver block (coloured red/yellow) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

M&L for machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm (coloured red/yellow), jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 complete all as specified and directed.

M & L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 20 mm thick of cement plaster (1:6) complete all as specified & directed.

M & L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 15 mm thick of cement plaster (1:6) complete all as specified & directed.

M & L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 20 mm thick in CM 1:6 complete all as specified and directed

M & L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:3 complete all as specified and directed

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:3 complete all as specified and directed

M & L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

M & L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dodo and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed plaster of 10 mm thick on fair faces of brick work in CM 1:3 complete all as specified and directed.

M&L for dewatering and desilting of existing static water rank of depth not exceeding 2.5 meter including removal of silt to a distance not exceeding 50 metre and depositing where directed complete all as specified and directed. Note :- Quantity of silt only be measured and paid. Rates shall be deemed to be inclusive of dewatering with pump/manual.

M & L for cleaning of plastered/concrete surfaces with wire brushes and removing all loose plarticles etc complete all as specified and directed.

M & L for Pin hole grouting with and including slurry for pin hole treatment and grouting using mix of OPC cement 43 grade, mixed with Dr Fixit URP 301 in specified ratio by injection method as per manufacturer instructions complete all as specified and directed.

M & L for applying two coats of Dr Fixit fast flex 113 on walls/floors including preparation of surfaces complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:3 over surfaces of Dr Fixit fast flex 113 coating with and including mixing of Pidiproof LWP @200ml per 50 kg cement bag as a protective layer finishing surface even and smooth without using extra cement complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid separately).

Supply only integral water proofing liquid Pidiproof LWP or its equivalent approved make.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Deduct Schedule of Credit of Rs. (-) 33000.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

NARESH KUMAR KHAJURIA

DAVINDER SINGH

K S BUILDERS

M/S SHUBAM ENGINEERS