REPAIR AND MAINTENANCE OF REFRIGERATOR AC AND SUMMER APPLIANCES AND REPAIR/REPLACEMENT OF LED LIGHTS AT OTM AND OPERATIONAL TECHNICAL AREAS INCLUDING R-53 H1 PLOT AIRPORT AREA UNDER ICGAS AND ICGS RATNAGIRI

Amount

Material and labour for cleaning and servicing of Split Type 1.5/2.0 Ton AC including repair of all loose electrical connections, abnormal noise in indoor/outdoor unit, foundation, power contactor etc. including top up of suitable gas complete all as specified and directed by Engineer in charge. Note: Replacement of any spares will be measured and paid separately.

Material and labour for cleaning and servicing of cassette 3.0/4.0Ton AC including repair of all loose electrical connections, abnormal noise in indoor/outdoor unit, foundation, power contactor etc. including top up of suitable gas complete all as specified and directed by Engineer in charge. Note: Replacement of any spares will be measured and paid separately.

Material and labour for checking the leakage of Split type 1.5/2.0 Ton AC with the help of N2 Gas and after defecting and repairing the leakage, charge the suitable refrigerant up to required level as specified on the unit complete all as specified and directed by Engineer in charge. Note: Replacement of capillary tube will be paid and measured separately.

Material and labour for checking the leakage of cassette 3.0/4.0Ton AC with the help of N2 Gas and after defecting and repairing the leakage, charge the suitable refrigerant up to required level as specified on the unit complete all as specified and directed by Engineer in charge. Note: Replacement of capillary tube will be paid and measured separately.

Supply and fixing in replacement of 1/2-inch copper pipe along with insulation material for Split AC 1.5/2 Ton of suitable make as per sample complete all as specified & directed by Engineer in Charge.

Ditto all as per Serial item No 5, but for 1/4-inch copper pipe along with insulation material

Ditto all as per Serial item No 5, but for 5/8-inch copper pipe along with insulation material

Ditto all as per Serial item No 5, but for Capacitor 45+/- 2 MFD.

Ditto all as per Serial item No 5, but for Capacitor 60+/- 6 MFD.

Ditto all as per Serial item No 5, but for Capacitor 4 MFD.

Ditto all as per Serial item No 5, but for Capacitor 6 MFD.

Ditto all as per Serial item No 5, but for Fan motor.

Ditto all as per Serial item No 5, but for Condenser coil unit complete.

Ditto all as per Serial item No 5, but for valve of 1/2 or 1/4 or 5/8.

Ditto all as per Serial item No 5, but for Flare nut 1/4, 3/8, 5/8 and 1/2.

Ditto all as per Serial item No 5, but for Evaporator Coil.

Ditto all as per Serial item No 5, but for Indoor motor.

Ditto all as per Serial item No 5, but for Swing motor complete of suitable size as per sample.

Ditto all as per Serial item No 5, but for Room sensor.

Ditto all as per Serial item No 5, but for coil sensor.

Ditto all as per Serial item No 5, but for Dead plug of Brass Type.

Ditto all as per Serial item No 5, but for Complete Rewiring of Outdoor Split AC.

Ditto all as per Serial item No 5, but for Universal Remote.

Ditto all as per Serial item No 5, but for Replacement of Indoor Unit capacity 2 Ton complete set as per Sample and Existing Make.

Ditto all as per Serial item No 5, but for Replacement of Outdoor Unit capacity 2 Ton complete set as per sample and Existing Make.

Ditto all as per Serial item No 5, but for Contactor for Inverter type AC.

Ditto all as per Serial item No 5, but for PCB Board for indoor unit of Inverter type AC.

Ditto all as per Serial item No 5, but for PCB Board for outdoor unit of Inverter type AC.

Ditto all as per Serial item No 5, but for Air Sensor of Inverter type AC.

Ditto all as per Serial item No 5, but for Coil Sensor of Inverter type AC.

Ditto all as per Serial item No 5, but for Heavy duty compressor terminal pin.

Ditto all as per Serial item No 5, but for Inlet water PVC pipe 20mm Dia along with clamps.

Ditto all as per Serial item No 5, but for Flexible PVC pipe of 20mm Dia as per sample.

Supply and Fix in replacement of Outdoor unit Stand for fixing in wall complete all as specified and directed by Engineer in Charge

Disconnecting the Electrical connection, removing the copper line, discharge line of Split AC 1.5/2.0 Ton capacity including indoor and outdoor units and all accessories and shifting/re-installing and testing the whole unit of Split AC in new location and checking the leakage of Split type 1.5/2.0 Ton AC with the help of N2 Gas and after defecting and repairing the leakage, charge the suitable refrigerant up to required level as specified in suitable size and length of copper pipe and making the holes in wall complete all as specified and directed by Engineer in Charge.

Supply and Fix in replacement of Factory made hermetically sealed compressor for Split Type AC 1.5 Ton capacity including rubber bushes sleeves, washers, nuts and bolts, terminal covers, clips etc. complete all as specified for the following items with capacities of any make including necessary transport from units to work shop and back to units after repairs complete all as specified and directed by Engineer in Charge. Notes:- 1. Rates deemed to be included for servicing, repairs and replacement of all connected parts, transportation of cooling appliances to work shop and back. 2. Rates deemed to be included for the gas required for charging.

Ditto all as per Serial item No 36, but for Split Type AC 2.0 Ton capacity.

Supply and Fix in replacement of Modular Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB SP 230 Volts of 25-32 Amps capacity complete all as specified and as directed.

Supply and Fix in replacement of Plug Tops of 16 Amps complete all as specified and directed.

Material and Labour for repairs to water drain leakage problem detection and refitting the same in entire system including testing and commissioning complete service for Split AC 1.5/2.0 Ton complete all as specified and directed.

Material & Labour for proper packing of white cement for AC indoor unit to outdoor unit hole for connections of copper pipes including of disconnection of indoor unit & making good disturbed area complete all as specified and directed by Engineer in charge.

Supply and charging of refrigerant R-134a/Suitable Refrigerant including cost of welding, leak detection, making good the defects in entire system, testing and commissioning of water coolers of 40/80 & 60/120 litres capacity complete all as specified and as directed.

Supply and Fix in replacement of Factory made hermetically sealed compressor for Water Coolers 40/80 & 60/120 Litres including rubber bushes sleeves, washers, nuts and bolts, terminal covers, clips etc. of any make including necessary transport from units to work shop and back to units after repairs complete all as per Notes specified and as directed. Notes 1. Rates deemed to be included for servicing, repairs and replacement of all connected parts, transportation of cooling appliances to work shop and back. 2. Rates deemed to be included for the gas required for charging.

Supply and fixing in replacement of PCB as per existing for Water coolers of 40/80 & 60/120 Litres capacity of suitable make complete all as specified & directed by Engineer in Charge.

Ditto all as per Serial item No 44, but for Capacitor 10 to 15 MFD.

Supply and fixing of steel water tubing of medium grade duly ISI marked GI tubing of 15mm Dia bore including all fittings such as tees, bends and elbow reducer, unions, clamps including cutting the existing line of 20/25 mm Dia and connecting complete all as specified and as directed.

Supply and charging of refrigerant gas R-134a/Suitable Refrigerant including cost of welding, leak detection, making good the defects in entire system, testing and commissioning of Refrigerator of 180 to 310 litres capacity complete all as specified and as directed.

Supply and Fix in replacement of Factory made hermetically sealed compressor for Refrigerator of 180 to 310 litres capacity including rubber bushes sleeves, washers, nuts and bolts, terminal covers, clips etc. of any make including necessary transport from units to work shop and back to units after repairs complete all as specified and as directed. Notes:- 1. Rates deemed to be included for servicing, repairs and replacement of all connected parts, transportation of cooling appliances to work shop and back. 2. Rates deemed to be included for the gas required for charging.

Supply and fixing in replacement of PCB for Refrigerator of 180 to 310 litres capacity of suitable make as per sample complete all as specified & directed by Engineer in Charge.

Supply and charging of refrigerant R-22 or Suitable Refrigerant including cost of welding, leak detection, making good the defects in entire system, testing and commissioning of Deep freezer of 200 to 320 litres capacity complete all as specified and directed.

Taking down the geyser of 25 litres capacity from its mounting by removing all water and electric connection and disassembling the geyser, Descaling cleaning the inner tank thoroughly and there should not be any bad test of water, Examining the water tightness of storage tank after cleaning, Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability, Inspection of pilot lamps, Reassembling the all the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and hydraulic testing, Re-fixing the Geyser and making electric connection, water inlet and outlet connection and testing and checking of all the functioning of water inlet outlet valves connected with geysers complete all as specified and as directed. Note: Replacement of defective/worn out parts will be measured & paid for separately.

Supply only heating element of the 1.5/2KW rating as required at site including rubber washers of any make and type complete as per sample.

Supply only Steel inner tank of 25 litre capacity geyser tank by made out of steel sheets appropriate thickness complete.

Supply only thermostat for the geysers of the 25 Litres capacities complete.

Supply only Indication lamp of Existing Size/Model (Set of Two) Red & Green complete.

Servicing of Desert cooler, including cleaning of cooling pads, fan blades, cleaning of water tank/cooling tank to prevent algae, repair of all electrical connections & servicing of water pump making good the defects in entire system, testing and commissioning of desert cooler complete all as specified and directed by Engineer in charge. Note: Replacement of any spares will be measured and paid separately

Supply only cooling pads for Desert cooler of suitable make as per sample complete.

Supply only water pump of suitable watt for Desert cooler of suitable make as per sample complete.

Supply only suitable water pipe for Desert cooler of suitable make as per sample complete.

Servicing of solar hot water system 100 - 300LPD capacity which includes cleaning the solar collector with soft cloth to remove the dirt & debris, flushing the system to prevent the mineral build up, prevent any leakage of pipes, tightening the nuts & bolts of support structure, cleaning of PVC water tanks, repair all electrical connections and complete testing working properly complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement of CPVC pipe of 25mm Dia for solar hot water system 100-300 LPD suitable make as per sample complete.

Supply and fixing in replacement of PPR Gate valve of 25 mm for solar hot water system 100-300 LPD suitable make as per sample complete.

Supply and fixing in replacement of Solar vacuum tube for solar hot water system 100-300 LPD suitable make as per sample complete.

Taking down ceiling fans 1200/1400mm sweep or Wall mounted Fan up to 400mm /Exhaust fans up to 300mm, remaining/cleaning of dust properly cleaning, greasing& overhauling of bearings including refixing and connecting up all as directed by Engineer-in-Charge. Note: Replacement of defective/worn out parts will be measured & paid for separately

Supply only 2.00/2.50 MFD condensers/capacitors.

Supply only 3.15/4.00 MFD condensers/capacitors.

Supply only ball bearing/Gun Metal Bush of existing ceiling fans complete.

Supply only Flexible copper three core of size 23/0076” wire/cable complete.

Supply only ‘U’ clamps complete with nut, bolts & split pins Heavy duty, suitable for existing ceiling fan at site

Supply only MS rod for ceiling fans 3 feet long with both end suitable size holes and cut mark complete.

Supply only Nut/bolts washers for fan blades fixing of any make/size/type as per site requirement (6 Nos for each set) suitable for existing ceiling fan at site complete.

Supply only canopy of ceiling fan bottom and upper side of size 1200/1400/1500mm complete.

Rewinding of burnt Ceiling fan/Exhaust fan motor with super enamelled copper wire of suitable size of any make, type, model including transportation (inclusive of material & labour) complete all as specified and as directed by Engineer-in-Charge.

Replacement of BLDC Drive card suitable for existing type/model/make of ceiling fan along with disconnecting of old PCB including transportation (inclusive of material & labour) complete connections and made serviceable fan all as specified and as directed by Engineer-in-Charge.

Painting of ceiling fans 1200/1400mm size complete at site, with super synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

Supply & Fix in replacement of metallic louvers mounted suitable for exhaust fan on wall all as specified and as directed by Engineer-in-charge

Supply & Fix in replacement of plastic body including louvers 200 to 300 mm size fan all as specified and as directed by Engineer-in-charge

Supply & Fix in replacement of motor of plastic body exhaust fan 300mm size all as specified and as directed by Engineer-in-charge

Material & Labour for servicing of voltage stabilizer of 1-5 KVA ratting including cleaning, avoid all electrical loose connections & including any repair parts and refixing at existing place with making good disturbed area complete testing and commissioning all as specified and directed by Engineer in charge.

Supply and Fix in replacement of LED luminaire 600 mm x 600 mm, 35/36-watt, 220 Volt, AC recessed mounted type soft glare free light complete with driver, holders & LED lamp suitable for roof/grid ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and Fix in replacement of LED luminaire 600 mm x 600 mm, 35/36-watt, 220 Volt, AC surface mounted type soft glare free light complete with driver, holders & LED lamp including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and Fix in replacement of LED light fitting with high output diffuser 2 feet, 10-watt 220 Volt, batten type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .

Supply and Fix in replacement of LED light fitting with high output diffuser 4 feet, 20-watt 220 Volt, batten type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and Fix in replacement of LED light fitting with high output diffuser 4 feet, 40-watt 220 Volt, batten type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and Fix in replacement of round/square shape 15-watt 220 volts AC recessed type with soft glare free light complete with drivers, holders, LED lamp suitable for roof/grid ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as specified and directed.

Supply and Fix in replacement of LED building security/street light fitting 35/36-Watt 230 Volt, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix in replacement of Gl pipe bracket 32 mm Dia 0.60 metre length fixed on wall/shed with suitable flat iron clamps and nut bolts complete all as specified & directed.

Supply and Fix in replacement of LED Flood light 120 Watt, 230 Volt, AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed

Supply and Fix in replacement of LED Flood light 200 Watt, 230 Volt, AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed

Ditto all as per Serial item No 89, but for Flood light 300 Watt.

Supply and Fix in replacement of post top lantern LED type 40-watt 230 volts AC outdoor type with decorative post top for 360-degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

M/S SS Tarders (BID ID -3489622)