Estimate for Supply Erection Commissioning of various electromechanical equipment like VT Pumps of 20 Cs Electric Motors Starter Panel and other allied accessories for flood protection works at RD 47900 BG Drain downstream

Supply Erection & commissioning of 20 cs VT Axial flow vertical turbine pumps of 980 RPM having static lift 6 mtr including standard delivery pipe & MS delivery bends of min. 8 mm thickness with bituminous based paint inside & outside i/c flange welding, HT nut bolts complete in all respect as per site & as per approved technical specifications.

Supply, erection & commissioning of solid shaft 100 HP, 380 V (+,- 10%),50 Hz, 980 RPM, IE2, vertical flange mounted squirrel cage induction motor suitable for 20 cs VT pump with 6 mtr lift type complete in all respect as per technical specifications

Supply, erection and commissioning 100 HP Panel fully Automatic dry type starter with ATS, 400 Amp. MCCB, Contactors 300,200,110 Amp., Micro Controller based protection relay CT’s including suitable capacitor bank having all types of protections i.e.UV/OV/ over current, phase loss/phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, Separate auto ON/OFF switch, separate relay for single Phase protection etc. with all allied accessories with 35 Mtr compatible 3 Phase Submersible Cu cable from motor to panel/starter in all respect suitable for open fields operation of 1 No. motor of capacity 100 HP with a suitable of MS channel with canopy suitable operation height above the kachha open as per site requirement for 20 Cs. VT Pumps as per approved technical specifications.

Supply, erection and commissioning of M.S delivery Pipes 20inch inner dia (equal to or less than 6 mtr length of pipe) and each pipe of 8 mm thickness both end welded with flange made MS Plate as per approved specification & Make. (Including HT Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required).

Supply, erection and commissioning of MS Girder (Conforming to IS808:2021) size ISMB 200 X 100 with primer and Bituminous Based Paint inside & outside will be complete by the agency in all respect. (Including Civil Work as per site requirement).

Supply, erection and commissioning of MS Crib 6'x2'x2' with MS Angle of size 50x50x 6 mm thick & MS Patti of size 50x6 mm alongwith primer and Bituminous Based Paint inside & outside in all respect (As per Sample & as per relevant IS Code). (As per HSR -B0979 MS Plates, angles, Channels etc i/c/ Fabrication)

Supply, erection and commissioning of 3.5 core 185 sqmm Armoured PVC aluminium power Cables, grade as per IS 7098-1985 as per approved makes and other allied material completed in all respect