Proposed Turnkey work for Hybrid DSA machine at Ground Floor Main Building - Civil and Electrical

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) Note - Work shall be carried out in two phases in order to provide uninterrupted kitchen services for the existing Hospital. Vendor has to provide & install necessary temporary partition made up with Plywood & Aluminum framework wherever required, without any cost to TMC

NUMBER #

Removing existing false ceiling of any material and any size with all necessary allied works, removing out debris out of TMH premises as directed by Engg-in-charge

PLASTER BREAKING :Labour charges only for removing existing damaged / cracked / loosened cement / neeru / rough casts and faced plaster or tile work with back coat at all floors and levels including cleaning the surfaces clear of all loose concrete/ mortar foreign materials, carting away the debris out of hospital premises including scaffolding raking out joints of brick / stone masonry haking concrete surfaces etc. complete with quantities to be executed as and when required and as directed by the engineer in charge. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; including the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.

All works above plinth and upto floor V level, M 15 grade

All works above plinth and upto floor V level, M 25 grade

CEMENT PLASTERING:Cement plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls or concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site Including scaffolding curing etc. complete all as directed by Engineer in charge ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) 20 mm thick for wall

Providing wood work with 1st class teak wood in frames for doors windows, ventilators, Air-condition frames, clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and tow coats of bitumastic paint to the surface of wood in contact with masonry/concrete etc.complete.

Providing & fixing 2mm thick lead sheet on wall/pannel and inside the door with help of requird screwing ,cutting, pasting , drilling & req hardware work etc complete work as additional sheileding for radiation as per instructions of Engineer Incharge.

d make lock and heavy duty handle set as per requirement including providing and fixing pelmet of 18mm thick commercial ply of kitply/Mysor/Century/Anchor make with approved laminate of 1.5mm thick and teak wood lipping patti and non-laminated surfaces should be polished with approved french polish at required shade and colour. With powder coating ,parly glazed partly panneled

Providing making and supplying computer table made out of 19mm thick approved commercial ply for table top, mounted on the vertical side support of 19mm thick ply and drawer unit cabinet with 12mm thick ply appron as shown in drawing. The drawer cabinet made out of 19mm commercial ply for sides, shelves and shutters and drawers mounting with heavy duty sliding channel with ready mode key board drawer with heavy sliding channels, all edges shall be lipped with 6mm thick T.W. lipping patti or PVC edge beading matching with laminate. All exposed faces should be 1.0mm thick laminate of approved colour and make, non laminated area should be 0.80 mm thick white / off white laminate including necessary hinges, handle, multuporpose lock, ball catch etc. as per drawing and as specified and directed by Engineer-In-Charge. Computer table with all inner surface with 0.8 mm thick approved laminate

Providing and fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides and shelves and 8 mm thick commercial ply approved make for back side.Door shutter made up of 19mm thick commercial ply and All exposed surfaces including shelves for open type cabine should be laminated with 1.0mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges shiuld be 6mm thick lipping patti or PVD lipping patti matching with laminate finish, locking arrangement with Godrej multipurpose lock etc. All inside areas shall be 0.80mm thick approved colour laminate etc.all complete as specified and directed by Engineer-In-Charge.

Open type

With shutter

Providing and Fixing new Gypsum board false ceiling with GI frame work including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per EIC.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main"T" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanisedbutterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed byEngineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and fixing in position suspended false ceiling system using 600x600 mm material fibre reinforced factory applied vinyl painted "ARMSTRONG" ceiling tiles (Armstrong ceiling systems) Tiles having 16/15 mm thick, and approved surface design and edge profile ( TEGULAR or equivalent) place in a suspended grid of size of 600 x 600 mm made of hot- dipped G.I. steel sections having an exposed surface capping of pre-finished bake polyester painted caoil wherein the main tee of size 24mm x 32 mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjustments. The cross tees of size 24x27x1200mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees , cross tees of size 24mm x 24mm including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per EIC. The maint tees to be suspended from the ceiling/soffit with the help of metal dash fastners of 6mm x 50mm ,soffit clits of 25mm x 35 x 1.60mm and 4m dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a disturbuted load of minimum 15kg/sqm (only Armstrong false ceiling area will be measured for the purpose of payment)

ARMSTRONG tile models of 'ELITE-16mm/' Fine Fissured - 16mm/Classic Lite-15mm'or other approval

Providing and fixing laminate finish panelling with aluminum framing 50 x 50 mm fixed to the wall at 600 mm c/c with 12mm plywood and 1 mm thick laminate of approved shade on single side. Rate to include that for all necessary hardware, adhesive, etc.as per Direction of Engineer Incharge

Providing and fixing approved quality machine pressed phenol formal dehy de bonded commercial/marine ply wood of approved size and fixing the same with necessary nails/screws/adhesive in partition cupboard shelves/ktichen/cabinets/flush doors etc. at all floors and locations in quantities as required at site in following thickness including 6 mm thick T.W.lipping patti at all exposed edges with nails/screws/hardwares/adhesive wastage in cutting, transportation etc. complete all as directed by the Engineer-In-Charge.

6mm thick ply

Providing & fixing soft board 12 mm thick with approved fabric supported on 6mm ply & wooden framework for display of drawings and documents.

Provid

Fancy SS coat hook single type

Providing and fixing 12mm thick glass shelves of approved make & size with fixing wall brackets or any other arrangements all necessary allied works. The edges of the glass to be polished etc all complete as directed by Engineer-in-charges

Structural Steel works Supplying, fabricating, erecting, fixing in position M. S. structures of required specifications including wire brushing, straightening, cutting, bending, welding, bolting, hoisting, fixing in position, shot blasting to SA 2.5, applying 2 priming coat of mastic epoxy primer and 2 coats of approved color epoxy paint & touch up same epoxy paint after erection, and as per drawing and specifications at all heights. The Structural Steel shall conform to IS codes and shall have ISI mark. All the welds shall be cleaned of rust and treated with 2 coats of mastic epoxy primer and 2 coats of same epoxy paint including required scaffolding. All bracing shall be bolted to the structure using class 8.8 bolts. Entire paint system shall be Berger / asian paints including scafolding as per direction of Engineer Incharge. MS rolled sections and plates conform to IS:2062 – min grade Fy250 Hollow pipe sections shall be min grade YST 240 conforming to IS 1161. Hollow square and rectangular sections shall be min grade YST240 conforming to IS 4923

Mechanical Anchor Fasteners Providing and fixing mechanical anchor fasteners of various diameters HST3 of HILTI / FISCHER make and shall be approved by the Structural Consultant prior to procurement. The anchors shall be for Concrete Surface / Masonry including scafolding as directed by Engineer Incharge.

Providing dia 20 mm bolts, up to 260 long

Providing dia 16 mm bolts, up to 300 long

Providing dia 12 mm bolts, up to 295 long

Providing dia 10 mm bolts, up to 200 long

Chemical Anchor Fasteners Providing and laying anchor fasteners of various diameters HSA of HILTI / FISCHER make and grouting the holes with chemical system of HILTI/FISCHER. The Grout shall be approved by the Structural Consultant prior to procurement. The anchors shall be for Concrete Surface / Masonry including scafolding as d

irected by Engineer Incharge.(With anchor depth min. 100 mm)

Providing dia 20 mm bolts, up to 250 long, safe and recommended shear cap 2.0 tons min.

Providing dia 16 mm bolts, up to 300 long, safe and recommended shear cap 1.5 tons min.

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) Note - Work shall be carried out in two phases in order to provide uninterrupted kitchen services for the existing Hospital. Vendor has to provide & install necessary temporary partition made up with Plywood & Aluminum framework wherever required, without any cost to TMC

NUMBER #

Primary point upto 4 mtrs length

Primary point length 4 mtrs to 7 mtrs

Primary point length 7 mtrs to 10 mtrs

Secondary point Extending from Primary point upto 4 m

Half point on same board with 5A S/W and 5A Socket.

NIT No. : TMC/ENG/Civ&Elect/Turnkey/DSA/25-26/e-NIT/40 dated 18/11/2025

POINT WIRING :- Point wiring for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make with Modular switch of Legrand-Myrius/MK-Blenze & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling and lugs complete.

Concealing of upto 12"X 12" Box with surface finish.

Dismantling and Removing Electrical Material :- Providing qualified Wireman and a helper with tools for dismantling the existing light, fan, bell, independent plug point wiring of all types with accessories and cable /switchgear in an approved manner as per instruction of Engineer Incharge and handing over all the removed material to Engineering Dept. by making list of material.

Refixing of Electrical wiring and Accessories:-Refixing of removed light, fan, bell, independent plug point wiring of all types with accessories and cable /switchgear in an approved manner as per instruction of Engineer Incharge with required fixing material and acceessories saddles clamps etc.

Supply & Installation of White Colour Legrand-Myrius Series /MK-Blenze Series Accessories as below

6A Switch 1 way - 1M Cat. No. 6730 00

Switch 16 amps 1M with Indicator Cat. No. 6730 10

Multistandard socket 6/10/13 A -2/3 pin for 250 V AC 15 A for 127 V type - 2 pin 2 M Cat No. 6730 43

Rotary dimmer 400 W - 1M Cat No. 6730 24

Blank plate -1 module

Supply & Installation of White Cover Plates with frames of Legrand-Myrius / MK Wraparound plus

1 Module -

2 Module -

3 Module -

4 Module -

6 Module -

8 Module -

2 x 4 Module -

2 x 6 Module -

Supply & Installation of White Cover Plates with frames of Legrand-Myrius / MK Wraparound plus

1 Module -

2 Module -

3 Module -

4 Module -

2 x 8 Module -

Supply & Installation of Legrand-Myrius MK Plastic Surafce boxes

1/2 Module -

12/16 Module -

2 Module -

3 Module -

4 Module -

2 x 8 Module -

Supply & installation of surface Board Legrand-Myrius/MK-Blenze (inclusive of back box, surface plate & wiring)

6Amp Switch&Socket

6A socket-2 nos+6A switch 2 nos

Supply & Installation of Legrand-Myrius /MK Metal boxes

16Amp Socket + 16A Switch with Indicator

Telephone Outlet with telephone I/O, back box and face plate in all respect (without telephone wire)

Supplying and fixing on wall PVC sun wood /prestplast heavy duty boards of following size

4inch x 4inch

4inch x 7inch

6 inch x 8 inch

8inch x 10inch

1/2 -3 Module

2 x 1.5 sq mm -+ 1.5sqmm Earth wire

2 x 2.5 sq mm -+ 1.5sqmm Earth wire

2 x 4 sq mm -+ 2.5 sqmm Earth wire

Supply and Fixing Rigid PVC conduit Medium Mechanical Stress (MMS) with all fitting & fixing accessories Precision make

Supply and Fixing PVC Flexible Conduits Poly Proplyne (PP) with all fitting & fixing accessories Precision make

Supply and Fixing PVC Casing Caping with all fitting & fixing accessories Precision make

1inch dia 25mm x 12mm

Supply and Fixing of PVC Trunking /covering of following sizes

100 x 50 mm PVC trunking

50 x 50 mm PVC trunking

4 Module

6A socket-3 nos+20A switch Cat. No. 6730 75

SUB MAINS Mains :- Providing Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling/lugs at both ends complete.

3 x 4 sq mm copper

PVC/XLPE Armoured cables :- supplying, laying, testing and commissioning of 1100 V AC grade PVC FRLS insulated ISI mark Poly- cab/RRK/Finolex Copper Conductor cable erected on wall,ceiling,column etc with appropriate size of GI spacers & saddlers screws etc complete in approved manner of following size . .

Cable Glands - Double Compression with Termination:- Supplying and erecting heavy duty flange type brass cable glands for armoured cable with brass washers,rubber rings complete erected with cable ends & leads connected with proper size lugs.Make Comet/Braco/Dowells.

2 to 4 core 2.5/4/ 6 sq mm

3 to 4 core 10 sq mm

3 1/2 x 185 sq mm

2 x 1.5 sq mm copper (Red Color for smoke Detector)

Cable Lugs :- Supplying & erecting crimping type Copper lugs confirming to IS standard suitable for cables upto evenly crimped with high pressure tool and connected to switch gear terminals with brass /cadmium plated nut bolts in an approved manner and other accessories.Make Dowell

4 x 4 sq mm copper

Flexible Cables:- Supplying, fixing of following flexibles copper conductor 1100 V a.c. grade cables Polycab/RRK/Finolex make with proper connection at both the ends as directed by Eng --in -chrg.

3 to 4 core 25-50 sq mm

Earthing :- Supplying,installation of copper strip /bare wire of earthing system on wall /slab/column/beam along with clips etc including end connections with crimping type copper lugs complete in all respected and as directed by Eng-in-charge

3 1/2 C x 185 sq mm

14 SWG copper bare wire

1 x 95 sq.mm

8 SWG copper bare wire

Copper strip of size 25 mm x 3 mm

Earthing Station

Supply & erecting copper plate of 60 cm x 60 cm x 3 mm buried in specifically prepared earth pit by excavation in soil so as to keep top of earth plate 1.5 mtr below ground level with 40 kg each charcoal and salt with altenate layers of charcoal and salt with 19 mm wiremesh for watering and brick masonary block C.I. cover complete as per para of IS 2043 of 1987 with necessary length of flat copper earth strip of 25mm x 6 mm bolted with lug to the plate and covered with G.I pipe complete with Isolation link box & link & duly submision of test report as per directions of EIC and making the site clear by removing debris.

Supplying and erecting following cable / wire with appropriate size casing caping or rigid PVC heavy guage pipe of approved make (Precision) with PVC accessories to make complete piping rigid, install in or wall / ceiling / concrete with PVC spacers, sadd clamps by suitable clips to complete the pipe erected etc as per Instruction of Engineer in charge.

RG 6 Coaxial cable

RG 11 Coaxial Cable

RG 6 Coaxial cable without casing/conduiting

RG 11 Coaxial Cable without casing/conduiting

LIGHT Fixtures Supply,installation,testing and commissioning of fixtures on wall/beam/slab by means of bracket ,anchor fastener suspended from slab/beam by means of 19 mm dia conduit pipe/down road,ball and socket arrangement,flexible twisted wire/ flexible cable connection etc and GI chain for recessed mounting fitting complete in all respect as directed by Engg. in charge and Philiphs make or any other approved make as per instructions of EIC.

Batten 4ft for LED tube Philips/Wipro/Crompton/Osram/Bajaj make.(As Approved by EIC) with Tube

Batten 2ft for LED tube Philips/Wipro/Crompton/Osram/Bajaj make.(As Approved by EIC) with Tube

LED Light fixture full glow 2 ft X 2 ft 6500WH Philips make

Light fixture ultra slim LED panel Square 15W IP20 6500K Philips make

Light fixture ultra slim LED panel Round 15W IP20 6500K Philips make

Light fixture ultra slim plus LED panel Round 22W IP20 6500K Philips make

Light fixture ultra slim plus LED panel Round 7W Philips make

LED Light Fixtures - Supply & Fixing - Surface /Suspended / Recessed Mounted luminaires Philips / Orient / Bajaj Make Suspended-Surface Mounted Luminaires

Smart Bright Surface-SM270C LED 30S 6500 PSU WH

Erection/fixing & commissioning of departmently supplied fluorescent fixtures on

PVC square box and duly connected with necessary hardware & leads and connector etc.

Pair of down rods MS Conduit (inner dia - 16mm, outer dia - 20mm & 2mm thickness) pipe upto 24 inch long with ball socket etc complete

Area Lighting

FAN HOOK

Double anchor fastener heavy duty with GI clamps

Supply fixing down rod of GI class 'B' pipe of (inner dia - 16mm, outer dia - 20mm & 2mm thickness) with threading,boring etc with necessory hardware & accessories for ceiling fans.

Providing GI Chain with GI hook

Only fixing of Fan wall/ceiling/exhaust type - departmently supplied with requried fixing hardware & cable.

Supply installation of Safety Chain for Old Ceiling Fans for providing secondary support

CHAPTER 5 : Distribution Boards Supply, installation, testing & commissioning DBs for mounting MCB/ELCB/Isolator - on wall complete.

SPN 12 way IP 43 with Metal door

TPN 6 way IP 43 with Metal door

TPN 8 way IP 43 with Metal door

TPN VTPN 8 way IP 43 with Metal door

TPN VTPN 12 way IP 43 with Metal door

SITC of Legrand DX3 make AC C Curve MCB of following sizes in provided enclosure and connected with leads on incoming and outgoing side duly completed in approved manner.

6 to 32 A SP MCB 10 KA

40 to 63 A SP MCB 10 KA

6 to 32 A TP MCB 10 KA

40 to 63 A TP MCB 10 KA

TPN VTPN 8 way IP 43 with Metal door

TPN VTPN 12 way IP 43 with Metal door

SITC of Legrand DX3 make AC C Curve MCB of following sizes in provided enclosure and connected with leads on incoming and outgoing side duly completed in approved manner.

6 to 32 A SP MCB 10 KA

Providing ,fixing and commissioning of Legrand DX3 make RCBO

SITC of MCCB TPN 250A ,36 KA

Cable end box for IP 43 DBs

SPN 12WAY DB

SITC of Legrand DX3 make AC D curve MCB of following sizes in provided enclosure and connected with leads on incoming and outgoing side duly completed in approved manner.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

For all VTPN MCB DB

16A/25A/32A DP - 300 mA

ETPN 6WAY DB

lephone Wiring :- Supplying and laying 0.5 mm gauge unarmoured telephone wire D.O.T approved, make Dlink/Finolex/Digilink/Polycab through exisitng conduit/casing caping/cable tray.