Provn of plinth with overhead roof of galvanized corrugated sheet of 20/25 feet height on iron frame for storage of hay baled and one static water tank with water pump pipeline and nozzle for firefighting at 488 (I) Sup Pl ASC at Mil Stn Gaya

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M & L for 40 mm thick PCC 1:2:4 type B-1 (using 12.5mm graded stone aggregate) as flooring and finishing surfaces even and smooth with using extra cement complete all as specified.

M & L for glass dividing strips, 38 x 3 mm thick and inserted in position, conform to design

M & L for machine cut kota stone slab flooring 20-25mm thick including cement screed bed 15 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete.

M & L for machine cut kota stone slab in riser of steps, skirting, dado and pillar 20-25mm thick incl cement screed bed 10 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete.

M & L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete.

M & L for brick work with sub class 'B' bricks, in half brick thick wall, straight or curved on plan exc 6m mean radius built in CM 1:4 complete.

M & L for 10 mm thick rendering in CM 1:6 on brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement complete.

M & L for 15 mm thick rendering in CM 1:4 over fair faces of brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement with WPC.

Supply Only water proofing compound (Sika latex power)

M & L for RCC M-25 Design Mix (using 20 mm graded aggregate) as in foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete complete.

M & L for RCC M-25 Design Mix (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams and plinth beams; and similar work; vertical or to batter complete.

Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions

M & L for two coats of cement based paint over a coat of primer incl preparation of newly plastered wall surfaces.

M & L for three coats of white washing on wall surfaces including preparation of newly plastered surfaces

S & F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete.

Ditto all aper item no 18 above but 6 to 8 mm dia, as in stirrups and spacers.

M & L formwork to rough finished flat surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, lintels, cantilevers, shelves incl supports, overhangs, etc, also splays between floors and beam etc complete as all spfd and directed.

M & L for RCC Design Mix M-25 (20mm graded aggregate) as in beams, cantilevers, bressummers, lintel etc.

M&L for PCC 1:2:4, type B-0 using 12.50 mm graded stone aggregate as in coping, benching, bed block, lintel band, drains and channels etc and similar work incl form work.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc etc Fe 410 W (Gde E - 250 quality).

Cuttting holes exc 150 sq cm but not exc 400 sq cm into or through brick walls built in CM or cement lime mortar and stone walls built in lime mortar and making good in PCC 1:2:4 type B1 as complete.

M & L for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165

M & L for extra above for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc

M & L for Mild steel screw bolts (machine made) with hexagonal heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal nut, exc 5cm but n exc 10cm long dia of neck is exc 11 mm but n.exc 15 mm complete.

M & L for Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long dia of neck is exc 11 mm but n.exc 20 mm complete.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces

M & L for applying a coat of synthetic enamel paint including preparation of old painted steel surfaces

S & F of ms plain, black sheet 1.25 mm thick in wall cladding, steel gates cut to size and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, incl bending or turning up, mitred angles, etc. as required complete.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in roof covering/Valley/Gutter/Ridges, fixed with self tapping screws complete.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above GL

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc, dressed stone work and precast concrete article

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling of asbestos cement (corrugated or semi corrugated) sheets as in roof coverings complete all as specified and directed.

Taking down chowkhat or frame n.exc 1.5 sqm (without taking off shutter)

Taking down chowkhat or frame exc 1.5 sqm but not exc 4.00 sqm (without taking off shutter) and removing to store complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed FR multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor complete area in same specification as per existing all as specified and directed.

(a) One light/fan/bell point controlled by one switch.

Supply and fix switch piano flush button single pole one way 5 amp.

Supply and fix ceiling rose surface bakelite 65x50mm 2 to 3 terminal

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete..

Supply and fix MCB single pole and neutral, 240 volts, 40 to 60 Amps, all as specified and as directed.

Supply and fix MCB single pole, 240 volts, up to 40 Amps, all as specified and as directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Crompton Greaves Cat part No CCS-100-20-65-HL2-DP-NWH 20W or its equvalent in Philips, Havells.

S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.

M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area10 sqmm 2 core.

M/S ABHAY KUMAR AND BROTHERS

M/s Ray construction