Repair and Renovation works of Type-III (P), Type-III (T), Type-IV (P) and Type-IV (T) quarters at Rangit Power Station

Dismantling doors, windows and clerestory windows (Steel or wood) shutter incl. chowkhats, architrave, holdfasts etc. complete and stacking within 50 mtrs lead of area 3 Sqm and below

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm and under, incl. cutting the patch in proper shape, racking out joints and prepairing and plastering in the surface of the walls complete incl. disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge with cement mortar 1:4 (1 Cement : 4 Fine Sand)

Providing and fixing anodized aluminum works for doors,windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer ‐ in ‐ Charge.

Providing and fixing glazing in Al. doors and windows ventilaor shutters and partitions etc. with PVC / neosprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer ‐ in‐ Charge.

Providing and Laying flooring with granite marble stone slab 20mmthickgranitestoneslabsflooringofsizenotlessthan1.0 sqm of 20mm thick laid over 20mm (average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, asper the direction of Engineer in Charge and carriage of material up to work site, all complete.

Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size).

Providing and laying first class brick workin half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1cementand4coursesand) including carriage of bricks upto work site, curing etc all complete.

Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete. 1:4 Mix.

Providing & Laying white or colored glazed vitrified tiles of Orient / Somani or equivalent colour in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.