PROVISION OF JAFFERY WALL FROM T-209 TO P-64, PROVISION OF CERTAIN E/M WORKS AT JK SETH HALL AND CERTAIN MINOR REVENUE WORKS AT HQTC BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Screed bed or bedding layer of mortar 15mm thick for laying floor tiles (CM 1:4) complete.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10mm th 1:3.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6.

Soap dish holder, fixed in repairs. Make-Jaguar Code No- ACN-CHR-1131N or equailent.

Towel rail of 600 mm long, fixed as in repairs. Make-Jaguar Cat no-CAN-1111SM or equailent. or equailent.

Hyegenic health fauset including 1.0 mtr long CP flexible tube with hook, fixed as in repairs. Make Jaquar Cat part No-ALD 573 or equailent.

Vitreous China squatting pan, ‘Orissa' pattern, size 580 x 440 mm white, with integral foot rest(excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete , fixed as in repairs.

10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed as in repairs.

Clove counter top basin of size515x380x120mm of whitecolour, fixed as in repairs

Two way bib tap with wall flange standard of brass any colour screwed for iron pipe 15 mm bore, fixed as in repairs. Make- Jaguar Cat no-FLR-5041N.

15 mm bore, stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) including flench, fixed as in repairs.

PVC connection, 15 mm size with PTMT nuts of length 450mm.

15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, fixed as in repairs.

Brass chromium plated shower rose with arm fancy type,125mm size, with or without swivel joints, fixed as in repairs.

Taking up or down 15mm bore water tubing and connection above four storey to eight storey building , cleaning for refixing.

Taking up or down 20 mm bore water tubing and connection above four storey to eight storey building , cleaning for refixing.

Cutting chases in stone masonry walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth etc.

15 mm dia GI pipe medium grade with all fittings and fixed to wall /laid in floor.

All as per item No 22 here in before but for but 20 mm dia

Concealed type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipes or for unions, fixed as in repairs. Make-jaguar Cat part no- ALD-087FTor equailent.

15 mm bore, stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) including flench, fixed as in repairs.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps, fixed as in repairs.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps, fixed as in repairs.

PVC bends of 110 mm dia, fixed as in repairs.

PVC bends of 75 mm dia, fixed as in repairs.

Taking down cement plaster on brick work or stone walls etc including racking out joints hacking for key, scrubbing down with water etc.

Rendering 15 mm thick in cm 1:4 of brick work or concrete surfaces finished even and smooth without using extra cement.

Applying 3mm thick JK/Birla white putty on wall and prepare the surfaces to achieve flawless smoothness.

Preparation of putty finished new plastered/old surfaces of wall and applying two coats of distempering walls with distemper oil-emulsion white or tinted over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering.

Preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash.

Designer UPVC door including frame work as colour approved by GE incl all fitting complete all as specified in SSR Part-I.

16mm thick Fine Fissured RH-99/ OPTRA RH 95 Bevelld tegular false ceilling of Make Armstrong and accoustic purposes of size 600mmx600mmx16/15mm thick fixed with Armstrong SL2/K2C2 frame and suspension ssystem (CAt Paart NO - PRELUDE 24 for 15.34 Kg wt) in GI grid powder coated snap gird ceiling frame with suspendor of required length , fixed with dash through fastener bolt of approved quality 04 NOs per sqm including necessary cutting securign and making good to disturbed surface. Note-Cost included for ceilling board and frame work complete.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exceeding 25 cm,

Cement concrete type C2 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete.

PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) foundation fillings and mass concrete.

Plain cement concrete (1:5:10 ypeE-2 using 40mm graded stone aggregate as in foundation filling and mass concrete

Steel work in tubular trusses including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel').

Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long

Two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described.

Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws.

Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws.

One piece wash down water close with hydraulic sheet cover and connecting to 'P' or 'S' rimless, fixed as in repairs. Make; Somani Cat part Maxico white with ezee close seat cover or equailent. Color as approved by GE.

Glaze finished urinal of size 630x375x380mm, fixed as in repairs. Make-Somani(Nova top inlet), Color as approved by GE.

8 mm th curved shape urinal partition with frosted glass chrome finish of size-900mmx450mm, fixed as in repairs. Make-Jaguar Code No- JSE-CHR-110UC450X or equailent.

Designer UPVC door including frame work as colour approved by GE. complete all as specified in SSR Part-I, fixed as in repairs.

Cutting opening through brick wall/stone wall masonary for door,window,gate and other opening incl trimming surface to receive rendering etc.

Forming jambs, etc. to openings (to foregoingitem), including cutting,toothing and properly bonding into old work,also facing, jointing and pointing to match existing work.

Rendering 15mm thick cement plaster in cement morter 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement.

Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. confirming Fe410-W (Gde E-250) quality A, complete,

M&L for Mild steel, plain, black sheet of 1.6 mm th in wall cladding,steel gates and similarwork, cut to size, holespunched; includinground headed screws,clout nails or rivetsand fixed to wood orsteel framing withplain 40mm lap jointswith riveted or weldedseams, includingbendingorturning up, mitredangles, etc. as required®

Surface dressing n exc 15 cm deep in soft/ loose soil on uneven surface of natural ground filled up area, removing vegetation, scrapping high patches and filling in low patches with the scrapped soil to give and even & neat look as in road side berms.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foudation etc, or for shafts, wells cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil.

Removing excavated material exe 250m but n.exe 500m and upto total distance of 1.5 km depositing where directed.

Removing excavated material n.exc 50 m and depositing where directed at al level n.exc 1.5 m above te starting point.

MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending and binding with MS wire annealed not less than 0.9 mm dia.

All as per item No 64 here in before but 6 to 8mm dia as in stirups

Form work to sides of concrete foundations footings bases of columns and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter.

Reinforced cement concrete type B1-1:2:4 (20mm graded aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete.

Reinforced cement concrete type B1-1:2:4 (20mm graded aggregate) as in columns, pillars, piers, posts and struts

Form work to sides and suffits of floor or roof beam, beam haunchings, girders, bressumers, lintels, cantilevers, shelves, including supports overhangs, etc finished rough in flat surface.

Reinforced cement concrete type B1-1:2:4 (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span

Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6.

Providing precast cement concrete louvres and jallies, type B0 1:2:4 (12.5mm graded aggregate), not less than 25mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4. Shape and design as approved by GE.

Rendering 15mm thick cement plaster in cement morter 1:4 with water proofing compound @ 2% by wt. of cement, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement.

Pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks 10cm thick (with plain or intrelocking joints as directed)and set in cement mortar 1:4.

18 to 20 mm thick granite slab, premium quality, black colour, table rubbed and polished, as in cooking platforms including rounding the projecting edges, bedded on 20mm thick CM 1:4 including pointing in white cement 1:2 using marble dust with admixture.

Designer tiles of size 300mmx600mmx9mm thick on vertical surfaces such as dado, skirting,pillasters and risers of steps set and jointed in neat cement slurry and pointed in white or coloured cement to match.

22-25mm thick precast chequered PCC tiles,of size 300mmx300mm endura tiles coloured, pre-polished, set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles, as in floor, laid over and including 20mm thick screed bed in cement mortar 1:6.

40mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement

25mm thk PCC 1:2:4 type B-1 using20mm graded agg as in flooring finished fair and even without using extra cement.

50mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement

Plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate, 75mm thick, as in sub base, plinth protection etc.

Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.

Powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. Note : Glass and Particle Board measured and paid seperately.

Sheet glass, of 4.8mm thick ordinary quality and glazing with oil putty in square in each pane.

12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with necessary screws/ beadings to timber/ aluminium frame work.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) foundation fillings and mass concrete complete all as specified and directed.

Material & labour for coloured Glazed ceramic tiles (Wood/stone/granite finished & designed) in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed

S&F of steel work plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections, Fe-290 (Gde E-165) complete all as specified and directed.

S&F 3mm thick Fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in steel gate etc complete all as specified & directed.

Supply only 12mm thick frosted toughened Sheet glass, premium quality, of any shape and size for fixing with or without partition aluminium frame etc complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Brass barrel tower bolts, 150 mm long with cast or sheet barrel and rolled or cast bolts and fixed

S & F Brass, sliding door bolt 250mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F Butt hinges 100mm long, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11

S & F Extruded brass handles, fabricated type polished

S&F Snow White vitreous China wash down water closet pan, cascade designed P trap 670 x 390 x 760 mm Cat No : S1060102 Cistern Cat No B1510108 Clair Seat Cover Cat No B1810105 Twin Flush Fittings , Soft Close Seat Cover Cat No B1520108, Make : CERA (CLAIR) complete all as specified and directed.

S&F Snow White vitreous China wash basin, size 550 x 400 mm Cat No S2020140 including coupling , Make : CERA (CANCHA) complete all as specified and directed.

S&F Central hole Basin Mixer with 450mm braided connection pipe (without POP-up), Cat No F2007461 , Make : CERA complete all as specified and directed.

S&F Wall mixer (3-in-1) with telephonic shower arrangement, Cat No F2007404 , Make : CERA complete all as specified and directed.

S&F Overhead rain shower square 200 x 200 mm (8" x 8"), Cat No F7010102 , Make : CERA complete all as specified and directed.

S&F Overhead rain shower arm 450mm (18") with wall flange, Cat No F7040106, Make : CERA complete all as specified and directed.

S&F Hand shower 90mm (4") dia with 3 flow and 140 mm (5.5") long arm, Cat No F7030104, Make : CERA complete all as specified and directed.

S&F15 metre flexible stainless steel hose for hand shower, Cat No F8070401, Make : CERA complete all as specified and directed.

S&F Overhead rain shower square 150 x 150 mm (6" x 6"), Cat No F7010506 , Make : CERA complete all as specified and directed.

S&F Overhead rain shower arm 180mm (7") with wall flange, Cat No F7040101, Make : CERA complete all as specified and directed.

S&F Angle cock with wall flange, Cat No F8040204, Make : CERA complete all as specified and directed.

S&F 2-way bib cock with wall flange anf aerator, Cat No F2007161, Make : CERA complete all as specified and directed.

S&F paper holder with flap guard, Cat No F5002110, Make : CERA complete all as specified and directed.

S&F Soap dish, Cat No F5004106, Make : CERA complete all as specified and directed.

S&F Towel rack 600 mm (24"), Cat No F5006101, Make : CERA complete all as specified and directed.

S&F Towel rail 600 mm (24"), Cat No F5004103, Make : CERA complete all as specified and directed.

S&F Corner glass shelf (small) 150 x 150 mm(6" x 6"), Cat No F5005101, Make : CERA complete all as specified and directed.

S&F Corner glass shelf (medium) 225 x 225 mm(9" x 9"), Cat No F5005102, Make : CERA complete all as specified and directed.

S&F Corner glass shelf (large) 300 x 300 mm(12" x 12"), Cat No F5005103, Make : CERA complete all as specified and directed.

S&F Looking mirror premium quality, 6mm thick with etching complete all as specified and directed.

S&F Health faucet brass body with wall hook and 1 metre SS braided rubber hose pipe, Cat No F8030301, Make : CERA complete all as specified and directed.

S&F Concealed stop cock for shower consisting sleeve, lever and flange of exoosed part Cat No F1013351 and conceled part-15 mm Cat No F4050102, Make : CERA complete all as specified and directed.

S&F Glass shelf (large), Cat No F5001114, Make : CERA complete all as specified and directed.

S&F Towel ring, Cat No F5006105, Make : CERA complete all as specified and directed.

S&F in repair stainless steel Gratings size 125 mm dia with or without waste hole complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets complete as directed and removing retrieved materials and making good the disturbed surface

Taking down existing light fittings of any description from wall/ ceiling including keeping in safe custody and making good the disturbed surfaces of walls

Point wiring complete with 1100volts grade, single core, PVC insulated FRLS cable multi-stranded copper conductor of size 1.5 sqmm nominal area, drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls/ ceiling with one run neutral and one run of single core cable of same description above but green colour in continous earthing wire connected to common earth dolly including PVC junction / mounting boxes on / in the wall for switch socket combination and GI junction box duly covered with 3mm thick hylam sheet complete for the independent switch to ceiling rose for One light/ fan point controlled by one single pole 5 Amps switch

All as per Srl item No 90 here in before but for one switch socket out let point 5 Amps on independent board

All as per Srl item No 90 here in before but for one switch socket out let point 5 Amps on same board with other switches

Point wiring with 2.5 Sq mm, single core, PVC insulated with multistranded PVC unsheathed copper conductor FR cable in and including PVC casing capping of suitable size ISI marked including earth wire continuity of PVC insulated, unsheathed 2.5 Sq mm copper conductor for 15 Amps socket point

Switch socket combined 6 pin 5/16 Amps flush type

All as per item no 3 here in before but for PVC insulated FRLS copper conductor of size 4.0 sqmm for switch socket multipurpose 15 Amps including provision of 4.0 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

Modular switch , 1 Module single pole one way 6 Amps.

Modular switch , 1 Module single pole one way 16 Amps.

Modular socket , 2 Module 6 Amps 240 volts Ac 2/3 pin combined suitable for inserting 2 pin 5 Amps/ 3 pin 5 Amps plug top

Modular socket , 2 Module 6/16 Amps 240 volts Ac 6 pin combined suitable for inserting 3 pin 6/16 Amps plug top

PVC ceiling rose 65 x 50 mm surface type with 3 terminals

Switch socket piano, flush type single pole, one way 5 Amp

Switch socket combined 5 pin 5 Amps flush type

Wall fans 230 volts single phase Airboll Hi-Speed 450 mm sweep suitable for wall mounting

Ceiling fan with accessories 230 volts, SP, 1200 mm sweep, BEE, 5 star rated of Make Model ES-40 of Havells or equivalent in Crompton/Usha

Exhaust fans body of suitable size 300 mm, AC single Phase 230/240 volts of metallic body with louver and other accessories

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts , 2500 Lumens, efficiency > 110, CCT 6500k , CRI > 80 , Wall / surface mounted , IP 20 aluminium etrusion housing complete with incl connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting

Supply and fix LED recess mounted luminaire suitable for 2x2 ft grid ceiling with system wattage of 30 watts , 3600 lumnes, CCT 6500k , CRI > 80 , IP 20 , complete incl PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting (Make-Philips of Catalogue No. RC420B M LED30S 6500 PSU WH , or equivalent in Wipro/Havells

Supply and fix driver for LED recess mounted down light fittings 30 Watt all as speciifed and as directed. (Make-Havels of Catalogue No. HFR 136 TLD E2 , or equivalent in Wipro/Philips

Flood light(AMAZA LED) 50 W white made in cast aluminium spigot housing with decorative poly carbonate diffuser and IPS protection. Make Bajaj BJFL 50W or equivalent in Wipro/Philips

Post top lanterns (GLOBE) 25 W Neutral white LED made in cast aluminium spigot housing with decorative poly carbonate diffuser and IP65 protection. Make : Bajaj (BLPTSP 25W NW LED) or equivalent in Wipro/Philips

Post top lanterns (LED POST SYRUS) 10W Neutral white LED made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection. Make : CG (LBLSR-10-CDL) or equivalent in Wipro/Philips

Flood light(AMAZA LED) 70 W green LED made in cast aluminium spigot housing with decorative poly carbonate diffuser and IP65 protection. Make Bajaj BJFL 70W or equivalent in Wipro/Philips

PVC insulated and FR PVC round sheathed, copper conductor (flexible) industrial cable 1.5 Sq mm 2 core, 1100 Volts, confirming to IS: 694.

PVC cable loop box, size not less than 145 mm X 145 mm X 95 mm, out door type, duly fitted to poles with suitable clamp, nuts, bolts & washers including one No of 6 Amps single pole MCB, porcelain insulated connectors for incoming and outgoing cables including taking out unserviceable PVC box.

Supply, fixing and commissioning of UPS 5KVA online double conversion 120V DC for 30 min back up single phase AC input 160 to 260 V single in single out and output 230 + 1% of 12V 26 AH 10 Nos batteries with stand and interlinks installation including testing complete all as specified and directed.

Voltage stabilizer for automatic operation, three phase, naturally Oil cooled, indoor type & designed for input variation between 150 V to 450 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 10 KVA

M&L for submain wiring with 2 runs of 2.5 sqmm and one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable drawn through and including non metalic PVC PVC Casing caping complete

S & F Engagement lights (AMAZE LED) 15W green and Red LED made in cast aluminium spigot housing with decorative poly carbonate diffuser and IP65 protection complete .

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 10.0 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 10.0sqmm PVC insulated unsheathed copper earth continuity conductor. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length, fixed in repairs.

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 6.0sqmm PVC insulated unsheathed copper earth continuity conductor. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length, fixed in repairs.

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 4.0sqmm PVC insulated unsheathed copper earth continuity conductor. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length, fixed in repairs.

Sheet metal enclosure for DB's, double door 12 way when MCBs to be used triple pole and neutral deep drawn with 200 Amps rated bus bar430 volts.

Supply and fixing of Vertical TPN MCB DB 4way double door, suitable for housing 8+12 modules with insulated bus bar assembly with flexible connecting link, all as specified and as directed. Make : LEGRAND/L&T/Siemens)

Supply and fixing of MCB TPN of 63A, 10KA rupturing capacity all as specified and as directed.(Make : LEGRAND/L&T/Siemens)

Supply and fixing of MCB SP of 06 to 32A, 10KA rupturing capacity all as specified and as directed.Make : LEGRAND/L&T/Siemens)

Four pole MCCB 100 Amp, 50 Hz, 415 volts with rupturing capacity 35 KA including connecting

MCB TP, 63 Amp, 415 volts,C- series with breaking capacity of 10 KA.

MCB SP, 6-40 Amps, 240 Amps. B-series with breaking capacity of 10 KA. Make: Indo Asian or equivalent of Hevalls/Legrand/C&S

Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with single pole MCB 20 Amps 240 Volts AC

Hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2of capacity 1.5Ton Make: Hitachi/LG/Blue star

S&F Sheet metal enclosure for DB's double door 8 ways when MCBs to be used Triple pole and neutral,deep drawn with 200 Amps rated copper bus bar 430V, complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door 08 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed.

4. S&F MCB SPN, 40 Amps, 240/415 V, B- series with breaking capacity of 10KA complete all as specified and directed.

Supply,install, testing and commissioning of submercible open well pump set electric driven of capacity 10 HP suitable for having discharge 550 LPM at 12 mt head, operated on 3 phase, 415 volt, 50 hz, AC supply including foot valve complete, necessary anchoring and MS angle iron clamps for fixing on SWT with nylon rope of suitable size ,make Kirloskar all as specified and directed by Eng-In-Chagre.

Supply, install and testing of star delta starter with over load relay ranging17.5 amps suitable for 10 HP pump set, 415 volts,50 Hz, complete all as specified and directed. Make : L&T- or equivallent of Havells.

Supply and fix PVC insulated,submercible, flat flexible copper conductor 2.5 sqmm , 3 core complete in and including PVC medium grage non metallic conduit and conduit accessories fixing on wall and anchoring arragement for running along pipe line all as directed.

Supply and fix gun metal gate valve 80 mm dia with iron wheel head screwed both ends for GI pipe and fixed complete all as directed.

Supply and laying GI tube medium grade, 80 mm dia with all fittings & fixtures laid in Tenches/Wal/Pillars etc.. Complete.

Provision of 150 mm water meter with suitable cutting to existing pipe line and fixing required flanges with nuts, bolts and washers for accuracy reading of supplied water from CJF pump house to HQTC pump house. Note : The rate quoted including the cost for earth work and accessories with febrication work for fixing of water meter.

OM ENTERPRISES

chowdeshwariconstructionco