GRAM PANCHAYAT KAMALPUR KHODAN ME STITH GAUSALA ME KHADNJA NIRMAN OR MENTINANCE

Earth work by mechinical/manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 'A tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift All kinds of soil DSR 2023 Ch.No.- 2 Spec. 2.2.1

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers. not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. DSR 2023 Ch.No.- 2 Spec. 2.25.

Brick work with cornmon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1) cement: 4 coarse sand) DSR 2023 Ch.No.- 6 Spec. 6.1.1

12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) DSR 2023 Ch.No.- 13 Spec. 13.1.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 4.1.8

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with sand, with common burnt clay non modular bricks. DSR 2023 Ch.No.- 11 Spec. 11.2

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, plers, abutments, posts and struts etc. above plinth level up to floor five levet, excluding cost of centering, finishing shuttering. reinforcement: 1:15:3 (1 cement 1.5 coarse sand(zone-III)derived from natural sources 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023 Ch.No. 5 Spec. 5.2.2 and

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars DSR 2023 Ch.No.-5 Spec. 5.22

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 Itr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm. DSR 2023 Ch.No.-13 Spec. 13.45.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 2023 Ch.No.- 13 Spec. 13.62.1