SPECIAL REPAIRS REPLACEMENT OF BALANCE HPSV HPMV MH SECURITY LIGHT INTO LED LIGHTS AT INS CHILKA UNDER GE CHILKA

Amount

Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying of under ground cable in any type of soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for natural river sand as cushioning of cables including spreading and punning down complete all as specified and as directed. Note :- Punned thickness shall be measured for payment purpose

Supply and lay un-reinforced pre-cast concrete cable covers class LV, Type I, flat, size 250mm x 150mm x 40mm, laid in trenches as cable protection all complete as spceified and directed.

M&L for cutting the existing road / PCC / drain for taking out / laying of underground cable including necessary earthwork excavation and making good to match with the exisitng surface complete all as specified and with PCC 1:3:6 type C1 by (using 20 mm graded stone aggregate) 100mm thick complete all as specified and directed.

S & F in reparis for 50 mm dia bore galvanised iron light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

Taking down & Relaying only serviceable cable in same or new location or position i.e. in trenches/on walls/floord/roof/ceiling etc of size 2/4 core 10 to 16 sqmm including necessary cable lugs, gland etc complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable in repairs insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

Supply, laying, jointing and testing XLPE Cable in repairs insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

Supply, laying, jointing and testing XLPE Cable in repairs insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 2 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

S&F in replacement street light bracket fabricated from 40mm dia medium grade GI pipe bent to shape not exceeding 1.5 M long alongwith 2 Nos flat iron clamps of size 25 x 4mm flat iron including nuts, bolts and washers suitable for fixing on poles including applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and as directed. Make of GI pipe :- Tata/Jindal/Prakash Surya

S&F in replacement of clamps suitable for fixing street light on pole fabricated from 32mmx6mm flat iron including nuts, bolts and washers suitable for fixing on poles including applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and as directed.

S&F in replacement of 60 Watts LED Street light made up of pressure die cast housing with toughned glass, IP 66 protection and impact resistance of IK07 with symmetrical light distribution and with all accessories( Flexible copper cable 1.5 sqmm 3 core with PVC conduit suitable length from sintex box to light) as required complete all as specified and as directed. Make-Philips Cat part No. BRP062LED65CW SLAS1PSU or Havells Cat Part No. ENDURAOMINIPLUSSL60WLED757SASYTOPC or Crompton Greaves Cat Part No. LST-60-CDL-M

S&F in replacement of 45 Watts LED,Street light made up of pressure die cast housing with toughned glass, IP66 protection and impact resistance of IK07 with symmetrical light distribution all accessories( Flexible copper cable 1.5 sqmm 3 core with PVC conduit suitable length from sintex box to light) complete all as specified and as directed. Make- -Philips Cat part No. BRP052LED045CWSLMRFGS1PSUGR or Havells Cat Part No. ENDURASUNDOWNSL45WLED765PASYBOPC or Crompton Greaves Cat Part No. LSTS-60-CDL-M

S&F in replacement 150W LED flood light in high mast pole of any length of die-cast aluminium body, IP66 including all accessories ( Flexible copper cable 1.5 sqmm 3 core with PVC conduit suitable length from sintex box to light)as required complete all as specified and as directed . Make- Philips Cat part No. BVP122LED150WHESY20FGXTFCLS4 or Havells Cat Part no.JETASTURDYNEOFLS150WLED757SSYMTOTG or Crompton Greaves Cat Part No. LFLN-150-CDL/60M

S&F in replacement of 250 W LED flood light in high mast pole of any length of die-cast aluminium body, IP66 protection, heat resistant toughened clear glass cover with reflector and all accessories ( Flexible copper cable 1.5 sqmm 3 core with PVC conduit suitable length from sintex box to light) complete with all accessories as required complete all as specified and as directed . Philips Cat part No. BVP410LED260CWHEAK55FGSHXTFCL or Havells Cat Part no.JETAIRISALPHAFL250WLED857PBOLTG or Crompton Greaves Cat Part No. LFLN-250-CDL/60M

S&F in replacement street light terminal boxes made out with SMC material, shock & dust proof of inside size 295x195x100mm as per IS and including 100Amp, TPN busbar fixed on insulators, 01 No 10Amp, SP MCB, earth termination with nuts & bolts and including 02 sets of flat iron 25x6mm clamps of suitable size with nuts, bolts and washers including two coats of aluminium paint over a coat of primer on exposed steel surfaces complete all as specified and as directed. Make:- Sintex/HPL/L&T

H V ELECTRICALS

M/S SOMANATH ENTERPRISES

M/S MECHANICAL ENGINEERING and ELECTRICAL CONTRACTORS