Development of New A site Regular Retail Outlet at location On SH8 from Bankura More to Khejurhati Bus Stand Dist Purba Bardhaman under Durgapur Divisional Office of West Bengal State Office

Subject: Development of new A site regular retail outlet at location on SH-8 FROM Bankura More to Khejurhati Bus Stand District Purba Bardhaman under Durgapur Divisional Office of WBSO

Tender Ref. No.: MAC/ERO/37/2025-26/LT-247

e-Tender ID: 2026_ERO_189184_1

Bidder/Firm/Company Name:

Type of Firm (Please Select)

Name of DSC User (Authorized Signatory) for the subject Tender

Father's Name of DSC User for the subject Tender

Select Tender type based on "Value" & "EMD / BSD" Criteria to show / hide relevant Annexure 100 Lakhs & More with BSD

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER 0

We confirm that we have quoted the rates in the tender considering Inter-alia the 1. Tender Document(s) 2. Additional Document(s) (if any) 3. BOQ Document (Price Bid Format) 4. Corrigendum (if any) 5. Pre Bid Meeting Minutes (if any)

We ………………………………………………………………………………………………………………………… (Name of the Tenderer) hereby certify that we have fully read and thoroughly understood the tender requirements and accept all terms and conditions of the tender including all corrigendum/addendum issued, if any. Our offer is in confirmation to all the terms and conditions of the tender including all corrigendum/addendum, if any and minutes of the pre-bid meeting. In the event our offer is found acceptable, and contract is awarded to us, the complete tender document shall be considered for constitution of Contract Agreement.

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION 0

I(a) As on date, I/We am/ are not undergoing insolvency resolution process or liquidation or bankruptcy proceedings, and no application has been filed and is currently pending against me/us for initiation of insolvency resolution process, liquidation or bankruptcy proceedings whether under IBC or under any other applicable law (where IBC is not applicable).

I(b) As on date, I/We am/ are undergoing corporate insolvency resolution process (CIRP) / liquidation / bankruptcy proceedings, the details of which are attached, including copy of the relevant petition.

I(c) As on date, application for initiation of CIRP/ liquidation/ bankruptcy proceedings is currently pending against me/us, under IBC or other applicable law (where IBC is not applicable), the details of which are attached, including copy of the relevant petition.

I/We undertake to notify to IOCL immediately and no later than one (1) working day therefrom, in a written form along with copy of the relevant petition, once a petition for initiation of insolvency process (CIRP)/ liquidation/ bankruptcy proceedings is filed against us/me, and also upon admission or dismissal of such petition by the NCLT or any other competent authority and the appeal proceedings, if any.

II . I undertake to provide an updated declaration on proceedings under IBC before award of contract, as per timelines stipulated by Indian Oil Corporation Limited.

It is understood that if this declaration is found to be false or in case I/we fail to comply with the undertakings given, Indian Oil Corporation Limited shall have the right to reject my/our bid and forfeit the EMD, and if the bid has resulted in a contract, the contract will be liable for termination, without any liability on the part of Indian Oil Corporation Limited, and such termination would be without prejudice to any other right or remedy (including black listing or holiday listing) available to Indian Oil Corporation Limited.

ANNEXURE – C COMPLIANCE CERTIFICATE REGARDING BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA 0

(A) The bidder, ………………………………………………………………………………………………………………………… is not from a country which shares a land border with India;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and are registered with the Competent Authority. Certificate of registration is attached with the bid;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and Government of India has extended lines of credit or is engaged in developmental projects in this country, ………………………………………………………………………………………………………… (Name of the Country) and hence do not require any separate registration for participation in this tender.

(B) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached).

(C) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not sub-contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached].

ANNEXURE – D UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS 0

I/We hereby declare that I/We/M/s.

(A) We hereby confirm that we have not transferred our ownership rights either in whole or in part to another entity or under process of transfer.

I/We have transferred my/our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

I/We are in process of transferring my/ our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

(B) I/We understand that Indian Oil Corporation Limited (IOCL) reserves the right to reject the tender of any entity, which has transferred its ownership rights in whole or in part or which is in process of transfer without assigning any reason for such rejection.

(C) I/ We also understand that refusal or failure to share the information regarding the status of any kind of business transfer process/restructuring etc. in this tender or at any later stage, as applicable, my/our tender is liable to be rejected by IOCL and without prejudice to any other remedy or action available with IOCL, IOCL shall forfeit the Earnest Money Deposit provided by the tenderer, in any form whatsoever.

ANNEXURE – E UNDERTAKING ON NO MULTIPLE BIDDING 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare:

I. have not submitted multiple bids. i.e., more than 1 bid either individually or in any combination of person (individual capacity, proprietor, affiliates, partnership, association of persons, Company, etc.)

II. understand that the submitted bids shall be construed as multiple bids in following scenarios:

a) A person shall be deemed to have submitted multiple bids if he submits more than one bid either individually or in any combination of person. A person shall for this purpose mean an individual, proprietor, any partner, association of persons, affiliate, company, etc.

b) A company shall for this purpose include any artificial person whether constituted under the laws of Indian or of any other country.

c) A person shall be deemed to have bid in a partnership format or in association of persons format if he is a partner of the firm which as submitted the bid or is a member of any association of persons which has submitted a bid.

d) A person shall be deemed to have bid in a Company format if, the person holds more than 10% (ten percent) of the voting share capital of the company which has submitted a bid or is a Director of the Company which has submitted a bid or holds more than 10% (ten percent) of voting share capital and/or is a Director of a holding Company which has submitted the bid.

III. am aware that, in case it is found that bidder has submitted more than one bids, all the bid shall be rejected and the Earnest Money Deposit (if applicable) for all such bids shall be forfeited, not by way of penalty or liquidated damages but by way of reimbursement of all pre-estimated costs likely to be incurred by the owner towards bidding process and in scrutiny and evaluation of bids.

Note: The submitted bids shall be considered as multiple bids as explained in "PART - B" of tender document.

ANNEXURE – F UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII) 0

UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII)

I ………………………………………………………………………………, son/daughter of ………………………………………………………………………………, do solemnly affirm and state as under:

(1). That I am the authorized signatory of M/s ……………………………………………………………………………… and I am duly authorized to furnish this undertaking declaration on behalf of M/s ………………………………………………………………………………

(2). That M/s ……………………………………………………………………………… has submitted its bid against bidding document of above Tender reference.

(3). That the Firm/Company is fully aware of the provisions of Public Procurement (Preference to Make in India) (PP-MII), Order 2017 and its amendments.

(4). We hereby confirm that our offer is achieving the minimum local content of:

Minimum 50% (>=50%)

Deemed Class-II Local Supplier (As per Clause 2A of PP-MII Order Revision Dated 19.07.2024. I confirm that we are manufacturing the tendered item under PLI Scheme and have received incentive from concerned PLI ministry. This declaration is being made within the specific time period only, as notified by concerned PLI Ministry)

(5). Details of location(s) where the local value addition is made

(6). I confirm that I am aware of the implication of the above undertaking and our liability on account of wrong declaration.

Note: 1. This undertaking shall be certified by the authorized signatory of the bidder. Authorised signatory shall mean a) The Proprietor in case of a proprietorship firm. b) Any one of the partners having POA in case of a partnership firm. c) Power of Attorney holder in case of a company.

2. Preference is applicable only for suppliers claiming minimum 50 % Local Content.

ANNEXURE – G BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare that in the event:

I / We withdraw / modify our bid during the period of bid validity

I / We commit any other breach of tender conditions / contract which would have otherwise attracted forfeiture of EMD

I / We fail to / refuse to initiate the execution of the awarded Contract as per the terms of the Contract

then I / We could be debarred from being eligible for bidding / award of all future tender(s) of Indian Oil Corporation Limited for a period of SIX months from the date of communication of such debarment.

I/We agree that the above shall be without prejudice to the any other rights /remedies available to Indian Oil Corporation Limited under the Tender and/or law.

Annexure Name Description Submission Status

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER NOT Submitted 0

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION NOT Submitted 0

ANNEXURE – C CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA NOT Submitted 0

ANNEXURE – D UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS NOT Submitted 0

ANNEXURE – E UNDERTAKING ON NO MULTIPLE BIDDING NOT Submitted 0

ANNEXURE – F UNDERTAKING ON PUBLIC PROCUREMENT (PREFERENCE TO MAKE IN INDIA (PP-MII) NOT Submitted 0

ANNEXURE – G BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD NOT Submitted 0

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par Less (-)

Tender Inviting Authority: General Manager (Contract Cell), Eastern Region Office (Marketing Division)

Name of Work: Development of New A site Regular Retail Outlet at location-“On SH-8 from Bankura More to Khejurhati Bus Stand”, Dist-Purba Bardhaman under Durgapur Divisional Office of West Bengal State Office

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 DEVELOPMENT OF NRO Khejurhati P&M item code 1

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in widt h as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place a nd lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item code 2

3 EXC. OVER AREAS IN ALL KINDS OF SOIL item code 3 50 M3 129.86 Excess(+) Full Conversion INR

4 EXC. OVER AREAS IN ORDINARY ROCK item code 4 7 M3 251.68 Excess(+) Full Conversion INR

5 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1. 5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excav ated soil & disposal of surplus excavated soil as directed, within or outside the site at an unobjectionable place. item code 5

6 EXC. IN ALL KINDS OF SOIL item code 6 39 M3 180.17 Excess(+) Full Conversion INR

7 EXC. IN ORDINARY ROCK item code 7 1 M3 320.02 Excess(+) Full Conversion INR

8 EXC.EXTRA LIFT EVERY 1.5M ALL KIND SOIL item code 8 12 M3 64.55 Excess(+) Full Conversion INR

9 EXC. - EXTRA LIFT EVERY 1.5M HARD ROCK item code 9 1 M3 115.75 Excess(+) Full Conversion INR

10 FILLING AVAILABLE EARTH item code 10 32 M3 156.85 Excess(+) Full Conversion INR

11 SUPPLY AND FILLING IMPORTED EARTH item code 11 5 M3 502.39 Excess(+) Full Conversion INR

12 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of a ttached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming inc luding watering, consolidating and dressing complete. item code 12

13 SUPPLY FILLING LOCAL SAND ZONE IV item code 13 13 M3 1084.13 Excess(+) Full Conversion INR

14 1 CEMENT:2 COARSE SAND:4 AGG. 20MM item code 14 4 M3 4847.66 Excess(+) Full Conversion INR

15 1 CEMENT:3 COARSE SAND:6 AGG. 20MM item code 15 11 M3 4469.55 Excess(+) Full Conversion INR

16 Centering and shuttering including strutting, propping etc. and removal of form work for: item code 16

17 CENT.& SHUT.FOR PCC-FOUND,FOOTING ETC item code 17 33 M2 203.41 Excess(+) Full Conversion INR

18 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 18

19 RCC 1:1½:3 UP TO PLINTH LEVEL W/O C&S item code 19 12.5 M3 5511.51 Excess(+) Full Conversion INR

20 Centering and shuttering including strutting, propping etc. and removal of form for : item code 20

21 CENT.& SHUTT. FOR RCC FOUNDN,FOOTING item code 21 6 M2 203.41 Excess(+) Full Conversion INR

22 CENT.& SHUTT. FOR RCC COLUMNS item code 22 44 M2 523.93 Excess(+) Full Conversion INR

23 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 23

24 TMT BARS FE- 500 GRADE item code 24 670 KG 59.62 Excess(+) Full Conversion INR

25 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 25

26 BRICK WORK IN CM 1:6 IN FOUNDN & PLINTH item code 26 20 M3 4396.97 Excess(+) Full Conversion INR

27 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item code 27

28 POLISHED GRANITE - KITCH.CUNTR<0.50SM item code 28 18 M2 3011.57 Excess(+) Full Conversion INR

29 POLISHED GRANITE - KITCH.CUNTR>0.50SM item code 29 21 M2 2861.82 Excess(+) Full Conversion INR

30 Extra for providing edge moulding to 18mm Granite/ marble stone counters,Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge. item code 30

31 EXTRA FOR EDGE MOULDING TO GRANITE WORK item code 31 49 MTR 268.67 Excess(+) Full Conversion INR

32 EXTRA FOR OPENING FOR WASH BASIN ETC. item code 32 1 EA 524.53 Excess(+) Full Conversion INR

33 STRUCTURAL STEEL WORK IN SINGLE SECTION item code 33 300 KG 61.45 Excess(+) Full Conversion INR

34 STR.STEEL IN BUILT UP SECTION item code 34 900 KG 72.66 Excess(+) Full Conversion INR

35 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in posi tion and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item code 35

36 HOT FINISHED WELDED TYPE TUBULAR TRUSS item code 36 200 KG 102.43 Excess(+) Full Conversion INR

37 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 37

38 12MM CEMENT PLASTER,1:4 WITH FINE SAND item code 38 80 M2 190.55 Excess(+) Full Conversion INR

39 ACRYLIC SMOOTH EXTERIOR PAINT item code 39 60 M2 117.61 Excess(+) Full Conversion INR

40 DELUXE MULTISURFACE PAINT-STEEL SURFACE item code 40 80 M2 89.83 Excess(+) Full Conversion INR

41 Providing and fixing B class G.I. pipes complete with G.I. fittings including trenching and refilling etc for WATER and AIR, Externa l work item code 41

42 15 MM DIA. NOMINAL BORE item code 42 5 MTR 174.34 Excess(+) Full Conversion INR

43 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : item code 43

44 15MM BRASS BALL VALVES-PLASTIC FLOAT item code 44 1 EA 241.86 Excess(+) Full Conversion INR

45 S/L OF 50 MM DIA SINGLE WALL FLEXIBLE PI item code 45 100 MTR 2378.81 Excess(+) Full Conversion INR

46 S/L OF 80 MM DIA SINGLE WALL FLEXIBLE PI item code 46 28 MTR 3307.5 Excess(+) Full Conversion INR

47 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Sta ndards and as approved by Engineer-in-charge : item code 47

48 FOUND.BOLT 16MMDIAX400MM L,75X5MM PLATE item code 48 40 EA 74.9 Excess(+) Full Conversion INR

49 FOUND.BOLT 25MMDIAX1.0M L,100X8MM PLATE item code 49 12 EA 414.87 Excess(+) Full Conversion INR

50 Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gaske t for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever menti oned shall be of grade M20 item code 50

51 20KL TANK IN EARTHPIT WITH RCC STRIPRAFT item code 51 3 LS 111603.02 Excess(+) Full Conversion INR

52 S/L U/G MS THREADED 40 MM DIA PIPE item code 52 28 MTR 485.84 Excess(+) Full Conversion INR

53 S/L A/G MS THREADED 40 MM DIA PIPE item code 53 50 MTR 253.98 Excess(+) Full Conversion INR

54 S/L U/G MS WELDED 80 MM DIA PIPE item code 54 4 MTR 1000.54 Excess(+) Full Conversion INR

55 S/L U/G MS WELDED 50 MM DIA PIPE item code 55 5 MTR 648.6 Excess(+) Full Conversion INR

56 Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld ins ide the flanges as per specifications and standard Drg.enclosed herein item code 56

57 S/W SLIPON FLANGES OF 80 MM DIA. item code 57 4 EA 698.98 Excess(+) Full Conversion INR

58 S/W SLIPON FLANGES OF 50 MM DIA. item code 58 4 EA 532.04 Excess(+) Full Conversion INR

59 Making flanged joints between flanges slip on, blind and flange etc. including providing/supplying 3 mm thick permanite oil gasket, nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications. item code 59

60 MAKING SLIPON / BLIND FLANGE JOINT 80MM item code 60 4 EA 427.94 Excess(+) Full Conversion INR

61 MAKING SLIPON / BLIND FLANGE JOINT 50MM item code 61 4 EA 344.74 Excess(+) Full Conversion INR

62 Supplying and installation of the following threaded item code 62

63 80 MM DIA AL. CAMLOCK COUPLING - MALE item code 63 3 EA 682.14 Excess(+) Full Conversion INR

64 Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wi re mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends. item code 64

65 S/I U TYPE 40MM CS BEND ON VENT PIPES item code 65 3 EA 516.98 Excess(+) Full Conversion INR

66 Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve item code 66

67 S/I SCREWED GM BALL VALVE 50MM DIA item code 67 2 EA 2668.66 Excess(+) Full Conversion INR

68 INSTALLATION OF SD/HD DISPENSING PUMPS (MONO /DUAL) Installation of supplied standard duty/heavy duty dispensing pump on existing pu mp island as per IOCL's drawings and instructions including supplying /filling required quantity of dry sand in the pit(s) below th e pump item code 68

69 INST.OF DU WITH ANCHOR BOLT & CC FOUND. item code 69 2 EA 3871.46 Excess(+) Full Conversion INR

70 Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, includi ng supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pit(s) below the pump item code 70

71 2 PRODUCT - 4 NOZZLE MPP/MPD item code 71 2 EA 9283.54 Excess(+) Full Conversion INR

72 Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pre ssure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard a ccessories, including civil works: item code 72

73 S/I OF 5 HP (160-220 LITRES) COMPRESSOR item code 73 1 EA 42942.07 Excess(+) Full Conversion INR

74 S/I DIGITAL TYRE INFLATOR item code 74 1 EA 41801.26 Excess(+) Full Conversion INR

75 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a s uitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item code 75

76 TRANSPTN OF 15/20 KL TANK : 0 - 30 KM item code 76 3 LS 6148.64 Excess(+) Full Conversion INR

77 TPT/KM OF 15/20KL TANK: EXTRA > 30KM item code 77 300 KM 47.3 Excess(+) Full Conversion INR

78 T-MONO/DUO/AIRCOMP/STP/PUMPS:3-6, <30KM item code 78 2 LS 5312.42 Excess(+) Full Conversion INR

79 T/KM-MONO/DUO/AIRCOMP/STP/PUMPS:3-6, >30 item code 79 50 KM 33.11 Excess(+) Full Conversion INR

80 TPT - MPD/MPP:1-2, <30KM item code 80 2 LS 3602.15 Excess(+) Full Conversion INR

81 TPT/KM - MPD/MPP:1-2, >30KM item code 81 200 KM 18.92 Excess(+) Full Conversion INR

82 S & F FRESH WATER IN U/G TANK item code 82 60 KL 487.93 Excess(+) Full Conversion INR

83 REMOVING WATER FROM U/G TANK item code 83 3 LS 916.15 Excess(+) Full Conversion INR

84 Re-installing the dispensing pump on existing foundation including connecting pipelines, electrical connections, tightening nuts of the foundation bolts etc. complete. item code 84

85 RE-INSTALLING MPD / MPP UNIT item code 85 2 EA 3566.21 Excess(+) Full Conversion INR

86 S/F 2" PV VALVES item code 86 2 EA 4871.14 Excess(+) Full Conversion INR

87 ALTERATION TO MANHOLE COVER FOR STP item code 87 1 EA 8715.55 Excess(+) Full Conversion INR

88 INSTALLATION OF STP item code 88 4 EA 1238.2 Excess(+) Full Conversion INR

89 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipe s, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 89

90 S&L 3X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 90 470 MTR 108.91 Excess(+) Full Conversion INR

91 S&L 4X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 91 160 MTR 126.46 Excess(+) Full Conversion INR

92 SUPPLY AND LAYING OF FLAT CABLES item code 92

93 S&L 3X4SQMM CU FLAT CABLE -SUBM PUMP item code 93 5 MTR 138.56 Excess(+) Full Conversion INR

94 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade ar moured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 94

95 CABLE TERM,NON FLP DC GLAND 3X2.5SQMM item code 95 38 EA 257.41 Excess(+) Full Conversion INR

96 CABLE TERM,NON FLP DC GLAND 4X2.5SQMM item code 96 11 EA 257.41 Excess(+) Full Conversion INR

97 CABLE JOINTING Cable Jointing : Providing straight through joint of following 1.1 KV grade XLPE insulated armoured cable with M-Seal make jointing kit, and other jointing material, etc. all complete including supply of all materials as per specification & directio n of Engineer In-charge. item code 97

98 CABLE JOINTING KIT FOR 3X2.5SQMM item code 98 2 EA 1151.22 Excess(+) Full Conversion INR

99 CABLE JOINTING KIT FOR 4X2.5SQMM item code 99 2 EA 1310.59 Excess(+) Full Conversion INR

100 CABLE ROUTE MARKER WITH 100X100X5MM item code 100 10 EA 284.91 Excess(+) Full Conversion INR

101 S&F OF FLP JUNC. BOX (4 WAY ENTRY) item code 101 1 EA 1093.76 Excess(+) Full Conversion INR

102 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and light ning protection under or aboveground complete as per specification for the following : item code 102

103 EARTHING WITH 50 X 10MM G.I. STRIP item code 103 220 MTR 290.19 Excess(+) Full Conversion INR

104 EARTHING WITH 32 X 6 MM G.I.STRIP item code 104 80 MTR 110.86 Excess(+) Full Conversion INR

105 EARTHING WITH 50 X 6 MM G.I. STRIP item code 105 10 MTR 164.61 Excess(+) Full Conversion INR

106 EARTHING WITH 25 X 3 MM GI STRIP item code 106 215 MTR 55.16 Excess(+) Full Conversion INR

107 16SQMM CUCABLE INCL.CROCDILCLIPIN LT PNL item code 107 1 EA 1201.77 Excess(+) Full Conversion INR

108 Supply of chemical earthing technology (pipe in pipe) for Electrode Design of specified Current Carrying Capacity in kA for 1 second . Crystaline Conductive mixture which is machine pressed in the pipes should not disintegrade or collapse when the outer pipe corrod es. Resistivity of the Material shall be less than 0.2ohm meter when tested by making a 20cm Cube of the Material & checking the res istance across the opposite faces of the cube. Necessary Test certificate shall be submitted. Concentric Earth Electrode Pipe should be MS of IS:1239 quality & hot Dip galvanised of 150 micron. Electrode Material Selection should be as per Clause 9.3: IS-3043. item code 108

109 CHEM EARTHING - PIPE IN PIPE 15KA item code 109 2 EA 15324.57 Excess(+) Full Conversion INR

110 Supplying & Fixing of following items for electrical safety in switch rooms/DG rooms etc item code 110

111 S&F RUBBER MAT 33KV GRADE (2MX1M SIZE) item code 111 2 M2 2687.03 Excess(+) Full Conversion INR

112 S&F 6MM THICK CHEQUERED PLATE item code 112 2 M2 2680.73 Excess(+) Full Conversion INR

113 S&F SHOCK TREATMENT CHART item code 113 1 EA 184.96 Excess(+) Full Conversion INR

114 S&F 11 KV GRADE HAND GLOVES, ISI MARK item code 114 2 EA 432.06 Excess(+) Full Conversion INR

115 PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor us e having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both in comers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, over load and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equip ment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All t he metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provide d with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neopren e type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos eart h terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be pr epared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032. item code 115

116 PANEL & DISTRIB. BOARDS - MEDIUM RO item code 116 1 EA 171857.32 Excess(+) Full Conversion INR

117 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item code 117

118 S&F MCB+ELCB UPTO 32A DP MCB item code 118 22 EA 413.61 Excess(+) Full Conversion INR

119 Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs item code 119

120 S&F MCB DB WITH 4 WAY (4+12) TPN item code 120 1 EA 2282.27 Excess(+) Full Conversion INR

121 S & I OF FLP ESD PUSH BUTTON item code 121 2 EA 1688.81 Excess(+) Full Conversion INR

122 Supplying and fixing 12 volt Charged LA battery of approved make for Electronic dispensing pumps including giving necessery electric al connection for the following AH ratings. item code 122

123 12V , 7AH CHARGED LA BATTERY WITH STAND item code 123 2 EA 762.06 Excess(+) Full Conversion INR

124 CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transfo rmer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and havi ng automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA r atings. item code 124

125 S/I SINGLE PAHSE AIRCOOLED 500VA CVT item code 125 2 EA 4590.9 Excess(+) Full Conversion INR

126 SINGLE SERVO VOLTAGE STABILISER Supply and fixing of 230V, Single phase, AC Servo voltage stabilizer of approved makes,(Range - 180 - 250 minimum) shall be provided for Individual dispensing pump as per IE Regulation and as per specification item code 126

127 S/I SINGLE PHASE SERVO STABILISER-5 KVA item code 127 2 EA 11059.03 Excess(+) Full Conversion INR

128 THREE PHASE SERVO STABILIZER Supplying and fixing of 3 phase air cooled servo stabilizer for balanced and unbalanced load shall be i ndependent correction of each phase (Range 300 - 460 V minimum) and as per specification item code 128

129 3PHASE,30 KVA AIRCOOLED SERVO STABILISER item code 129 1 EA 54860.97 Excess(+) Full Conversion INR

130 Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete. item code 130

131 S&E ARM " Y BRACKET 38/50MM DIA. ON POLE item code 131 2 EA 1332.35 Excess(+) Full Conversion INR

132 Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole ba se (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-cha rge. item code 132

133 S&D 3CX2.5SQMM PVC CU WIRE IN L POLE item code 133 16 EA 833.47 Excess(+) Full Conversion INR

134 OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) : item code 134

135 S&E 7M HIGH GALVANISED OCTAGONAL POLE item code 135 14 EA 8557.36 Excess(+) Full Conversion INR

136 YARD LIGHTS: 100W WITH IP66 PROTECTION item code 136 16 EA 5624.58 Excess(+) Full Conversion INR

137 PANEL BOARD STICKERING WORK item code 137 1 LS 1233.84 Excess(+) Full Conversion INR

138 PANEL BOARD MARKING item code 138 1 LS 6991.76 Excess(+) Full Conversion INR

139 PREPARATION OF SLD - ELECTRICAL LAYOUT item code 139 1 LS 8636.88 Excess(+) Full Conversion INR

140 PREPARATION OF SLD - EARTHING LAYOUT item code 140 1 LS 8636.88 Excess(+) Full Conversion INR

141 Supply and Installation of 16 SWG MS/GI powder coated weather proof Earthing Box of following size with door and locking arrangement with lock and key. Box to be mounted on ISA 40x40x5 (Painted with black synthetic enamel paint) frame having 2 legs of length 800 m m (500 mm above ground and 300 mm below ground which is to be grouted with PCC 1:2:4). Bottom of box should have opening for incomin g earth GI strips all complete, as per specification and direction of Engineer-in-charge. Note: EARTHING BOX in RED should be boldly written over the box. The box should have a hood at the top extending outwards such that no water should seep through inside the bo x during rainy season to avoid rusting. item code 141

142 i) 450 X 300 X 250 mm item code 142 1 EA 2474.76 Excess(+) Full Conversion INR

143 DEVELOPMENT OF NRO Khejurhati Non-P&M item code 143

144 SURFACE EXCAVATION item code 144 100 M2 66.1 Excess(+) Full Conversion INR

145 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in widt h as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place a nd lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item code 145

146 EXC. OVER AREAS IN ALL KINDS OF SOIL item code 146 505 M3 129.86 Excess(+) Full Conversion INR

147 EXC. OVER AREAS IN ORDINARY ROCK item code 147 6 M3 251.68 Excess(+) Full Conversion INR

148 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1. 5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excav ated soil & disposal of surplus excavated soil as directed, within or outside the site at an unobjectionable place. item code 148

149 EXC. IN ALL KINDS OF SOIL item code 149 145 M3 180.17 Excess(+) Full Conversion INR

150 EXC. IN ORDINARY ROCK item code 150 12 M3 320.02 Excess(+) Full Conversion INR

151 EXC.EXTRA LIFT EVERY 1.5M ALL KIND SOIL item code 151 88 M3 64.55 Excess(+) Full Conversion INR

152 EXC. - EXTRA LIFT EVERY 1.5M HARD ROCK item code 152 13 M3 115.75 Excess(+) Full Conversion INR

153 FILLING AVAILABLE EARTH item code 153 395 M3 156.85 Excess(+) Full Conversion INR

154 SUPPLY AND FILLING IMPORTED EARTH item code 154 5 M3 502.39 Excess(+) Full Conversion INR

155 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of a ttached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming inc luding watering, consolidating and dressing complete. item code 155

156 SUPPLY FILLING LOCAL SAND ZONE IV item code 156 35 M3 1084.13 Excess(+) Full Conversion INR

157 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item code 157

158 1 CEMENT:2 COARSE SAND:4 AGG. 20MM item code 158 16 M3 4847.66 Excess(+) Full Conversion INR

159 1 CEMENT:3 COARSE SAND:6 AGG. 20MM item code 159 28.5 M3 4469.55 Excess(+) Full Conversion INR

160 1 CEMENT:4 COARSE SAND:8 AGG. 40MM item code 160 6 M3 4134.3 Excess(+) Full Conversion INR

161 Centering and shuttering including strutting, propping etc. and removal of form work for: item code 161

162 CENT.& SHUT.FOR PCC-FOUND,FOOTING ETC item code 162 115 M2 203.41 Excess(+) Full Conversion INR

163 PRE-CAST CC 1:2:4 KERB STONE,..WITH C&S item code 163 10 M3 5379.84 Excess(+) Full Conversion INR

164 40MM DAMP PROOF COURSE item code 164 16 M2 337.32 Excess(+) Full Conversion INR

165 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 165

166 RCC 1:1½:3 UP TO PLINTH LEVEL W/O C&S item code 166 59 M3 5511.51 Excess(+) Full Conversion INR

167 Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth an d string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excludin g cost of centering, shuttering, finishing and reinforcement : item code 167

168 RCC 1:1½:3 WALLS ..UPTO 5 LVL W/O C&S item code 168 15 M3 6645.31 Excess(+) Full Conversion INR

169 Centering and shuttering including strutting, propping etc. and removal of form for : item code 169

170 CENT.& SHUTT. FOR RCC FOUNDN,FOOTING item code 170 88 M2 203.41 Excess(+) Full Conversion INR

171 CENT.& SHUTT. FOR RCC WALLS ETC. item code 171 360 M2 435.1 Excess(+) Full Conversion INR

172 CENT.& SHUTT. FOR RCC SLABS, ROOFS item code 172 110 M2 494.9 Excess(+) Full Conversion INR

173 CENT.& SHUTT. FOR RCCLINTELS, BEAMS item code 173 60 M2 394.21 Excess(+) Full Conversion INR

174 CENT.& SHUTT. FOR RCC COLUMNS item code 174 40 M2 523.93 Excess(+) Full Conversion INR

175 CENT.& SHUTT. FOR RCC FINS item code 175 45 M2 730.9 Excess(+) Full Conversion INR

176 CENT.& SHUTT. WITH PLY FOR RCC BEAMS item code 176 50 M2 458.16 Excess(+) Full Conversion INR

177 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 177

178 TMT BARS FE- 500 GRADE item code 178 11500 KG 59.62 Excess(+) Full Conversion INR

179 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work using cement content as per ap proved design mix manufactured in fully automatic batching plant & transported to site of work in transit mixer for all leads havin g continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing & reinforcement including co st of admixtures in recommended proportions as per IS:9109 to accelerate/ retard setting of concrete, improve workability without im pairing strength & durability as per direction of Engineer-in-charge (Note :- Cement content considered in this item is @ 330 kg/cum . Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable. item code 179

180 M25 GRADE RMC UPTO PLINTH LEVEL item code 180 119 M3 5997.38 Excess(+) Full Conversion INR

181 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 181

182 BRICK WORK IN CM 1:6 IN FOUNDN & PLINTH item code 182 37 M3 4396.97 Excess(+) Full Conversion INR

183 BRICKWORK IN CM 1:6 IN S/STR UPTO LVL V item code 183 6 M3 5420.26 Excess(+) Full Conversion INR

184 HALFBRICK MAS IN CM1:4 S/STR UPTO LVL V item code 184 30 M2 665.6 Excess(+) Full Conversion INR

185 DRY BRICK ON EDGE FLOOR IN MUD MORTAR item code 185 100 M2 486.19 Excess(+) Full Conversion INR

186 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item code 186

187 POLISHED GRANITE - KITCH.CUNTR<0.50SM item code 187 3 M2 3011.57 Excess(+) Full Conversion INR

188 Extra for providing edge moulding to 18mm Granite/ marble stone counters,Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge. item code 188

189 EXTRA FOR EDGE MOULDING TO GRANITE WORK item code 189 10 MTR 268.67 Excess(+) Full Conversion INR

190 EXTRA FOR OPENING FOR WASH BASIN ETC. item code 190 1 EA 524.53 Excess(+) Full Conversion INR

191 MS GRILLS TO WINDOWS item code 191 50 KG 118.04 Excess(+) Full Conversion INR

192 CHROME PLATED FLOOR DOOR STOPPER item code 192 2 EA 166.02 Excess(+) Full Conversion INR

193 AL. HYDRAULIC DOOR CLOSER item code 193 2 EA 608.12 Excess(+) Full Conversion INR

194 100X72MM CHROME PLATED MORTISE LOCK item code 194 1 EA 575.87 Excess(+) Full Conversion INR

195 FACTORY MADE PVC DOOR FRAME item code 195 20 MTR 340.26 Excess(+) Full Conversion INR

196 Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on t he hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 1 7mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the he lp of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and dir ection of Engineer-in-charge item code 196

197 FACTORY MADE NON DECO. PVC SHUTTERS item code 197 10 M2 2162.87 Excess(+) Full Conversion INR

198 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or w ith fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with w ith required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanical ly wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws includin g fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately) item code 198

199 POWDER COATED AL.SECN,FIXED GLAZING item code 199 5 KG 325.84 Excess(+) Full Conversion INR

200 POWDER COATED AL.SECN, SHUTTERS item code 200 50 KG 390.14 Excess(+) Full Conversion INR

201 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per directions of Engineer in charge item code 201

202 PRE-LAM BOTH SIDE DECO.BOARD IN AL.SEC. item code 202 5 M2 747.58 Excess(+) Full Conversion INR

203 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket e tc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be pa id in basic item): item code 203

204 FLOAT GLASS 6.0MM IN AL.SEC. item code 204 5 M2 925.74 Excess(+) Full Conversion INR

205 FLOAT GLASS 8.0MM IN AL.SEC. item code 205 5 M2 1044.25 Excess(+) Full Conversion INR

206 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in f loors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single pie ce M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. item code 206

207 DBL ACTION FL.SPRING- BRASS COVER PLATE item code 207 2 EA 1837.38 Excess(+) Full Conversion INR

208 FILLING GAP BY SILICON SEALANT item code 208 100 MTR 56.73 Excess(+) Full Conversion INR

209 100MM BRASS LOCKS OF APPD.MAKE item code 209 2 EA 327.45 Excess(+) Full Conversion INR

210 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in- c harge item code 210

211 POWDER COATED AL.ROUND SHAPE HANDLE item code 211 4 EA 59.7 Excess(+) Full Conversion INR

212 P/FIXING 12MM FRAMELESS TOUGHENED GLASS item code 212 25 M2 3176.2 Excess(+) Full Conversion INR

213 STRUCTURAL STEEL WORK IN SINGLE SECTION item code 213 100 KG 61.45 Excess(+) Full Conversion INR

214 STR.STEEL IN BUILT UP SECTION item code 214 9350 KG 72.66 Excess(+) Full Conversion INR

215 ROLLING SHUTTERS item code 215 15 M2 2102.35 Excess(+) Full Conversion INR

216 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in posi tion and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item code 216

217 HOT FINISHED WELDED TYPE TUBULAR TRUSS item code 217 2400 KG 102.43 Excess(+) Full Conversion INR

218 MS 16MM DIA FAN CLAMPS item code 218 3 EA 122.22 Excess(+) Full Conversion INR

219 MS GRATINGS,FRAMES,LADDER ETC. item code 219 2000 KG 93.55 Excess(+) Full Conversion INR

220 CHEQUERRED PRECAST CC TILES IN FOOTPATH item code 220 5 M2 662.67 Excess(+) Full Conversion INR

221 25MM KOTA STONE FLOORING item code 221 10 M2 1093.87 Excess(+) Full Conversion INR

222 25MM KOTA STONE IN STEPS item code 222 2 M2 1292.54 Excess(+) Full Conversion INR

223 CERAMIC GLAZED TILES FOR WALLS item code 223 35 M2 735.72 Excess(+) Full Conversion INR

224 CERAMIC GLAZED TILES FOR FLOORING item code 224 15 M2 661.89 Excess(+) Full Conversion INR

225 Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% a nd conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sa nd jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified item code 225

226 60X60 CM VITRIFIED FLOOR TILES item code 226 60 M2 1071.53 Excess(+) Full Conversion INR

227 60X60 CM VITRIFIED TILES FOR SKIRTING item code 227 5 M2 1103.87 Excess(+) Full Conversion INR

228 Providing and fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge ) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) /Super Durable Polyester (SDP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Micr ons (i.e. 15-18 microns SMP /SDP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP/SDP paint over epoxy primer. To tal Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scra tches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge. item code 228

229 KLIPPON GALVALUME PLAIN SHEET RIDGES item code 229 60 MTR 297.27 Excess(+) Full Conversion INR

230 KLIPPON GALVALUME PLAIN SHEET FLASHING item code 230 60 MTR 263.21 Excess(+) Full Conversion INR

231 KLIPPON GALVALUME SHEET GUTTER item code 231 20 MTR 743.9 Excess(+) Full Conversion INR

232 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with sea l ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item code 232

233 110MM PVC RAIN WATER PIPE item code 233 30 MTR 217.83 Excess(+) Full Conversion INR

234 160MM PVC RAIN WATER PIPE item code 234 40 MTR 577.28 Excess(+) Full Conversion INR

235 Providing & fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes confo rming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. item code 235

236 110MM UPVC COUPLER item code 236 5 EA 84.12 Excess(+) Full Conversion INR

237 110MM UPVC SINGLE PUSHFIT COUPLER item code 237 5 EA 77.45 Excess(+) Full Conversion INR

238 UPVC SINGLE T WITH DOOR 110X110X110MM item code 238 5 EA 145.18 Excess(+) Full Conversion INR

239 UPVC SINGLE T WITHOUT DOOR - 110MM.. item code 239 5 EA 134.65 Excess(+) Full Conversion INR

240 UPVC 87.5 DEGREE BEND OF 110MM item code 240 5 EA 92.73 Excess(+) Full Conversion INR

241 UPVC PLAIN SHOE OF 110MM item code 241 5 EA 81.26 Excess(+) Full Conversion INR

242 Providing & fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm h ard wood plugs, screwed with M.S. screws of required length including cutting brick work & fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. item code 242

243 110 MM UPVC PIPE CLIPS item code 243 5 EA 206.23 Excess(+) Full Conversion INR

244 150F/200F FALSE CEILING item code 244 176 M2 1071.58 Excess(+) Full Conversion INR

245 PROVIDING & FIXING BARE KLIPPON GALVALUM item code 245 176 M2 738.71 Excess(+) Full Conversion INR

246 S & F 18 GAUGE GI PLAIN SHEET item code 246 56 M2 2739.63 Excess(+) Full Conversion INR

247 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 247

248 12MM CEMENT PLASTER,1:6 WITH FINE SAND item code 248 425 M2 181.55 Excess(+) Full Conversion INR

249 20MM CEMENT PLASTER,1:6 WITH FINE SAND item code 249 104 M2 246.82 Excess(+) Full Conversion INR

250 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item code 250

251 6MM CEMENT PLASTER WITH FINE SAND item code 251 125 M2 162.35 Excess(+) Full Conversion INR

252 NEAT CEMENT PUNNING item code 252 74 M2 44.82 Excess(+) Full Conversion INR

253 2MM THK POP PUNNING OVER PLASTER item code 253 430 M2 140.46 Excess(+) Full Conversion INR

254 ACRYLIC SMOOTH EXTERIOR PAINT item code 254 160 M2 117.61 Excess(+) Full Conversion INR

255 DELUXE MULTI SURFACE PAINT SYSTEM item code 255 250 M2 101.54 Excess(+) Full Conversion INR

256 DELUXE MULTI SURFACE PAINT -WOOD WORK item code 256 20 M2 93.01 Excess(+) Full Conversion INR

257 DELUXE MULTISURFACE PAINT-STEEL SURFACE item code 257 485 M2 89.83 Excess(+) Full Conversion INR

258 SYNTHETIC ENAMEL PAINT item code 258 60 M2 126.5 Excess(+) Full Conversion INR

259 Demolishing cement concrete manually/ by mechanical means including disposal of material outside premises at an unobjectionable pla ce as per direction of Engineer-in-charge. item code 259

260 DEMOLISHING CC 1:3:6 item code 260 10 M3 1240.69 Excess(+) Full Conversion INR

261 DEMOLISHING BRICK WORK item code 261 5 M3 1049.63 Excess(+) Full Conversion INR

262 DEMOLISHING STONE MASONRY item code 262 5 M3 1252.73 Excess(+) Full Conversion INR

263 DISMANTLNG STEELWORK IN BUILTUP SECTION item code 263 50 KG 2.96 Excess(+) Full Conversion INR

264 Dismantling manually/by mechanical means including stacking of serviceable material & disposal of unserviceable material outside si te at unobjectionable place as per direction of Engineer-in-charge : item code 264

265 DISMANTLING WBM ROAD item code 265 10 M2 111.4 Excess(+) Full Conversion INR

266 DISMANTLING BITUMENOUS ROAD item code 266 10 M2 218.98 Excess(+) Full Conversion INR

267 DEMOL.CC/RCC WORK LEAD OF 1000M item code 267 5 M3 1521.02 Excess(+) Full Conversion INR

268 Carriage charge for disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, stacking, unloading to approved municipal dumping ground/unobjectionable place as/direction of Eng g- in-Charge beyond IOCL Premises for all leads and including all lifts item code 268

269 MALBA & WASTE CARRIAGE > 1 km < 3 km item code 269 1 M3 110.22 Excess(+) Full Conversion INR

270 MALBA & WASTE CARRIAGE > 3 km < 5 km item code 270 1 M3 132.81 Excess(+) Full Conversion INR

271 PREPARATION OF SUB GRADE item code 271 50 M2 111.94 Excess(+) Full Conversion INR

272 Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plan t at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform laye rs of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve the desired dens ity, complete as per specification & direction of Engineer-in-charge. item code 272

273 GRANULAR SUB BASE -75MM TO 0.75MM item code 273 380 M3 1797.86 Excess(+) Full Conversion INR

274 WET MIX MACADAM item code 274 290 M3 1886.19 Excess(+) Full Conversion INR

275 Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufactur ers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658 , maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thorough ly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joi nts at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) item code 275

276 P/L REFLECTIVE LAQUERED M40 80MM THK PAV item code 276 1200 M2 851.22 Excess(+) Full Conversion INR

277 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x41 0x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : item code 277

278 1 URINAL - 5 L WHITE PVC AUTO-CISTERN item code 278 2 EA 3557.77 Excess(+) Full Conversion INR

279 100MM SCI GULLY TRAP item code 279 2 EA 31.85 Excess(+) Full Conversion INR

280 600X450 BEVELLED EDGE MIRROR item code 280 2 EA 916.21 Excess(+) Full Conversion INR

281 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including a ll CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & f ittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Expo sed on wall item code 281

282 CPVC PIPES 40MM INTRNAL EXPOSED ON WALL item code 282 20 MTR 463.16 Excess(+) Full Conversion INR

283 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including al l CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. item code 283

284 CPVC PIPES 15MM CONCEALED item code 284 20 MTR 292.53 Excess(+) Full Conversion INR

285 CPVC PIPES 20MM CONCEALED item code 285 20 MTR 341.45 Excess(+) Full Conversion INR

286 CPVC PIPES 25MM CONCEALED item code 286 20 MTR 401.29 Excess(+) Full Conversion INR

287 CPVC PIPES 32MM CONCEALED item code 287 5 MTR 484.98 Excess(+) Full Conversion INR

288 Providing and fixing brass bib cock of approved quality : item code 288

289 15MM BRASS BIB COCK item code 289 6 EA 216.05 Excess(+) Full Conversion INR

290 20MM BRASS BIB COCK item code 290 2 EA 233.11 Excess(+) Full Conversion INR

291 Providing and fixing brass stop cock of approved quality : item code 291

292 15MM BRASS STOP COCK item code 292 8 EA 216.05 Excess(+) Full Conversion INR

293 20MM BRASS STOP COCK item code 293 2 EA 233.11 Excess(+) Full Conversion INR

294 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : item code 294

295 25MM GUN METAL VALVE WITH CI WHEEL item code 295 2 EA 355.01 Excess(+) Full Conversion INR

296 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : item code 296

297 150MM DIA CP BRASS SHOWER ROSE item code 297 2 EA 134.82 Excess(+) Full Conversion INR

298 PROVIDING POLYETHYLENE TANK ON TERRACE item code 298 1000 LTR 6.29 Excess(+) Full Conversion INR

299 15MM CP BRASS LONG BODY BIB COCK item code 299 2 EA 394.42 Excess(+) Full Conversion INR

300 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C. I.cover with frame of 300 x300 mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : item code 300

301 100X100MM GULLY TRAP WITH COMMON BRICKS item code 301 1 EA 1647.41 Excess(+) Full Conversion INR

302 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in th e proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty item code 302

303 150MM DIA NP2 CLASS RCC PIPES item code 303 70 MTR 330.34 Excess(+) Full Conversion INR

304 SOAK PIT 2.5M DIA X 3M DEPTH item code 304 1 EA 18051.28 Excess(+) Full Conversion INR

305 ATACTIC PP 5 LAY W.PROF TREAT-GLAS FIB. item code 305 5 M2 366.3 Excess(+) Full Conversion INR

306 WATER PROOFING WITH BRICK BAT COBA item code 306 5 M2 998.66 Excess(+) Full Conversion INR

307 Writing name of Retail Outlet and location/ Indian Oil Corporation monogram, other sign / slogans on building / glass of show windo w etc. of the following heights / diameters with vinyl sticker of approved quality and shade. 150 micron thick Non Reflective Vinyl sticker 3M or Equivalent Brand item code 307

308 LETTER SIZE UPTO 5CM item code 308 5 EA 15.27 Excess(+) Full Conversion INR

309 LETTER SIZE 6-15CM item code 309 5 EA 45.81 Excess(+) Full Conversion INR

310 LETTER SIZE 16-25CM item code 310 20 EA 76.36 Excess(+) Full Conversion INR

311 LETTER SIZE 26-70CM item code 311 20 EA 458.14 Excess(+) Full Conversion INR

312 FOUND.BOLT 25MMDIAX1.0M L,100X8MM PLATE item code 312 48 EA 414.87 Excess(+) Full Conversion INR

313 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipe s, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 313

314 S&L 3X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 314 510 MTR 108.91 Excess(+) Full Conversion INR

315 S&L 4X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 315 100 MTR 126.46 Excess(+) Full Conversion INR

316 S&L 4X16 SQMM,1.1KV ALUMINIUM CABLE FRLS item code 316 10 MTR 128.3 Excess(+) Full Conversion INR

317 S&L3.5X35 SQMM,1.1KV ALUMNM CABLE FRLS item code 317 50 MTR 173.42 Excess(+) Full Conversion INR

318 S&L3.5X50 SQMM,1.1KV ALUMNM CABLE FRLS item code 318 30 MTR 212.92 Excess(+) Full Conversion INR

319 S&L3.5X70 SQMM,1.1KV ALUMNM CABLE FRLS item code 319 10 MTR 271.78 Excess(+) Full Conversion INR

320 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade ar moured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 320

321 CABLE TERM,NON FLP DC GLAND 3X2.5SQMM item code 321 25 EA 257.41 Excess(+) Full Conversion INR

322 CABLE TERM,NON FLP DC GLAND 4X2.5SQMM item code 322 8 EA 257.41 Excess(+) Full Conversion INR

323 CABLE TERM,NON FLP DC GLAND 4X16SQMM item code 323 2 EA 337.62 Excess(+) Full Conversion INR

324 CABLE TERM,NON FLP DC GLAND 3.5X35SQMM item code 324 2 EA 337.62 Excess(+) Full Conversion INR

325 CABLE TERM,NON FLP DC GLAND 3.5X70SQMM item code 325 2 EA 493.04 Excess(+) Full Conversion INR

326 CABLE BRICK DUCT Providing & constructing underground brick duct 650mm below GL for laying of 3 cables of max. diameter 70mm, comple te with supply and laying of sand, bricks & including Excavation and backfilling in all kind of soils item code 326

327 U/G 225MM WIDE BRICK DUCT FOR CABLE item code 327 10 MTR 210.97 Excess(+) Full Conversion INR

328 50MM, CLASS B GI PIPE FOR CABLES item code 328 5 MTR 423.31 Excess(+) Full Conversion INR

329 Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers , tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams o r any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil item code 329

330 PERFTD GI CABLE TRAY 150MM X 50MM X 2MM item code 330 5 MTR 445.34 Excess(+) Full Conversion INR

331 S&F OF FLP JUNC. BOX (4 WAY ENTRY) item code 331 10 EA 1093.76 Excess(+) Full Conversion INR

332 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and light ning protection under or aboveground complete as per specification for the following : item code 332

333 EARTHING WITH 25 X 3 MM GI STRIP item code 333 40 MTR 55.16 Excess(+) Full Conversion INR

334 PROVIDING INTERNAL WIRING item code 334

335 LIGHT/FAN/5A POINT, WIRING, MOD SWITCH item code 335 30 EA 582.47 Excess(+) Full Conversion INR

336 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit eithe r on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the followin g Make of Insulated wires shall be as per approved make item code 336

337 SUBMN WIRE-2X1.5SQMM,EARTHWIRE 1X1.5SQMM item code 337 30 MTR 108.61 Excess(+) Full Conversion INR

338 SUBMN WIRE-2X2.5SQMM,EARTHWIRE1X2.5SQMM item code 338 30 MTR 124.23 Excess(+) Full Conversion INR

339 SUBMN WIRE-2X4SQMM,EARTHWIRE 1X4SQMM item code 339 30 MTR 148.78 Excess(+) Full Conversion INR

340 SUBMN WIRE-2X16SQMM,EARTHWIRE 1X16SQMM item code 340 10 MTR 311.7 Excess(+) Full Conversion INR

341 SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per f ollowing details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's sp ecification and direction of Engineer In-charge. item code 341

342 S&F SWITCH WITH 1 OR 2 MODULE FRAME item code 342 5 EA 180.77 Excess(+) Full Conversion INR

343 S&F SWITCH WITH 3 MODULE FRAME item code 343 2 EA 198.62 Excess(+) Full Conversion INR

344 S&F SWITCH WITH 4 MODULE FRAME item code 344 3 EA 213.5 Excess(+) Full Conversion INR

345 S&F SWITCH WITH 6 MODULE FRAME item code 345 2 EA 247.71 Excess(+) Full Conversion INR

346 S&F SWITCH WITH 8 MODULE FRAME item code 346 2 EA 284.91 Excess(+) Full Conversion INR

347 S&F SWITCH WITH 12 MODULE FRAME item code 347 2 EA 322.86 Excess(+) Full Conversion INR

348 S&F 6A MODULAR SWITCH item code 348 15 EA 207.26 Excess(+) Full Conversion INR

349 S&F 15 A MODULAR SWITCH item code 349 15 EA 240.36 Excess(+) Full Conversion INR

350 S&F 6A, 3 PIN MODULAR SOCKET item code 350 5 EA 237.06 Excess(+) Full Conversion INR

351 S&F 15 A 6 PIN MODULAR SOCKET item code 351 5 EA 271.1 Excess(+) Full Conversion INR

352 S&F FAN REGULATOR OF STEPPED MODULAR item code 352 3 EA 427.42 Excess(+) Full Conversion INR

353 Supply & fixing of 300mA RCCB of approved Make of following ratings: item code 353

354 S&F RCCB - 4 POLES, 63A item code 354 2 EA 2065.8 Excess(+) Full Conversion INR

355 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item code 355

356 S&F MCB+ELCB UPTO 32A SP MCB item code 356 10 EA 148.04 Excess(+) Full Conversion INR

357 S&F MCB+ELCB UPTO 32A DP MCB item code 357 13 EA 413.61 Excess(+) Full Conversion INR

358 Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs item code 358

359 S&F MCB DB WITH 4 WAY (4+12) TPN item code 359 2 EA 2282.27 Excess(+) Full Conversion INR

360 SWITCH FUSE UNIT WITHOUT FUSE Supply & fixing switches/accessories in sheet metal enclosure including providing of required connec tions with supply of necessary cable/conduits as required in case of existing control switch panel/ switch board etc. all complete as per specification and direction of Engineer-In-Charge.( SFUs shall be of approved make and SFUs shall be without fuse) item code 360

361 S&F 100AMP TPN SWITCH FUSE UNIT item code 361 1 EA 4468.18 Excess(+) Full Conversion INR

362 HOARDING LIGHTS:30W WITH IP65 PROTECTION item code 362 10 EA 1986.48 Excess(+) Full Conversion INR

363 LED TUBE LIGHT: 18W WITH IP65 PROTECTION item code 363 10 EA 426.06 Excess(+) Full Conversion INR

364 LED TUBE LIGHT: 8W WITH IP20 PROTECTION item code 364 4 EA 332.78 Excess(+) Full Conversion INR

365 CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: item code 365

366 S&I 1200 MM SWEEP CEILING item code 366 3 EA 1642.95 Excess(+) Full Conversion INR

367 EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). item code 367

368 S&I 9" LIGHT DUTY EXHAUST FAN KHAITAN/EQ item code 368 2 EA 1245.21 Excess(+) Full Conversion INR

369 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make item code 369 2 EA 765.04 Excess(+) Full Conversion INR

370 Providing and fixing H type double tone SS Pull handle of GODREJ (7268) or equivalent make item code 370 1 M2 1936.6 Excess(+) Full Conversion INR

371 Providing and fixing Chrome Finish SS Health faucet with 8mm dia, 1 meter long item code 371 2 EA 1080.48 Excess(+) Full Conversion INR

372 Stainless Steel Handrail:Providing and fixing item code 372 50 EA 340 Excess(+) Full Conversion INR

373 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-c hambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corne rs, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjace nt finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all co mplete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shal l be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be a cceptable. item code 373

374 Two track two panels sliding window made of (small series) frame item code 374 1 KG 6590.24 Excess(+) Full Conversion INR

375 Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded. profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel sect ion made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of app ropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion weld ed including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacen t finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all com plete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid se parately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account account shall be mad e. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. item code 375

376 Casement window single panel with S.S. friction hinges item code 376 1 M2 9015.72 Excess(+) Full Conversion INR

377 WALL HUNG COMMODE item code 377 2 M2 12923.84 Excess(+) Full Conversion INR

378 Providing & fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes confo rming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. item code 378

379 160MM UPVC COUPLER item code 379 5 M2 241.72 Excess(+) Full Conversion INR

380 160MM UPVC SINGLE PUSHFIT COUPLER item code 380 5 M2 213.92 Excess(+) Full Conversion INR

381 UPVC SINGLE T WITH DOOR 160X160X160MM item code 381 5 EA 440.48 Excess(+) Full Conversion INR

382 UPVC SINGLE T WITHOUT DOOR - 160MM item code 382 5 EA 415.88 Excess(+) Full Conversion INR

383 UPVC 87.5 DEGREE BEND OF 160MM item code 383 5 EA 310.2 Excess(+) Full Conversion INR

384 UPVC PLAIN SHOE OF 160MM item code 384 5 EA 133.24 Excess(+) Full Conversion INR

385 S/F UNDER CANOPY RECESS MOUNTED 80W LINEAR LIGHT (2.4 m) item code 385 20 LS 8805.52 Excess(+) Full Conversion INR

386 COUNTER SUNK WASH BASIN item code 386 2 EA 6085.02 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information