REPAIR TO STP / SURVIVAL POOL AT VARIOUS LOCATION AT UNDER GE (AF) MARATHAHLLI

Amount

Removing of dewatered Semi dry Sludge cake from drying bed 8x4x1.2m and depositing at a distance not more than 50 mtrs etc at STP Vishwa Vihar Complete all as specified and directed.

Cleaning the following tanks of sizes as mentioned at STP Vishwa Vihar with bleaching powder and sodium hydro chloride and taking out the stagnated slurry away from site all as specified and directed by Engr-in-charge:- (a) Collection tank of size 10x5x2.5 mtrs (02 Nos) (b) Manhole chambers of size 2x2x1.5 m (05 Nos) (c) Equalisation tank 3x2x4 mtrs (01 No) (d) Aeration tank of size 5x4x3.5 mtrs (02 Nos). (e) Clarifier dia 3.5 mtrs depth 3 mtrs (01 No) (f) Clear water tank 6x5x3.5 mtrs (02 Nos) (g) Under ground treated water tank 4x4x4 mtrs (01No)

Supply and Filling Anti Foul PVC Fill media inside Bio tower for STP Vishwa Vihar Complete as per Manufacturers Specifications including removing of existing Old as directed.

Dismantling the Self priming Centrifugal aeration pump set of Capacity 3 HP by disconnecting the electrical connections and GI tubing etc for repairs and re-fixing/ connecting the same after rewinding done alongwith following repairs including all Material and labour:- (a) Removing/replacement of worn out ball bearing of the pump set by providing new ball bearing, greasing etc complete. (b) Replacement of MS pump coupling complete. (c) Replacement of rubber star coupling complete. (d) Replacement of Motor terminal box complete.

Re-winding of burnt out electric motor by removing the existing burnt out copper wire complete and cleaning of the winding slot and rewind the motor by using proper gauge copper conductor (winding wire) matching to the existing winding wire including varnishing, heating etc complete all as specified for Electric Motor 1.5 / 2 HP Capacity Complete all as specified and directed.

Re-winding of burnt out electric motor by removing the existing burnt out copper wire complete and cleaning of the winding slot and rewind the motor by using proper gauge copper conductor (winding wire) matching to the existing winding wire including varnishing, heating etc complete all as specified for Electric Motor 3 HP Capacity Complete all as specified and directed.

Supply and Filling Compressor Oil as required in compressors of suitable grade complete all as specified and directed.

Supplying and Fixing in repairs neoprine bottom scrapper alongwith angle iron frame Complete all as specified and as directed.

Dismantling the waste lifting pump (submersible pump) of capacity 3/5 HP (01 No) by disconnecting the electrical connections and GI tubing etc for repairs and re-fixing/connecting the same after the rewinding alongwith following repairs :- (a) Removing/replacement of worn out ball bearing of the pump set by providing new ball bearing, greasing etc complete-02 Nos. (b) Replacement of MS pump coupling complete. (c) Replacement of rubber star coupling complete. (d) Replacement of Motor terminal box complete.

Disconnecting the electric connections, taking down from position electric air blower pump set capacity 200 cum/hrs, transporting to workshop for taking out burnt copper winding from the slots, cleaning the slots and rewinding with super enamelled copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional and checking the winding leak proof, refixing the motor with proper alignment with pump set, connecting up the electric connections testing & commissioning including replacing SS sleeves- 02 Nos and ball bearing - 02 Nos complete.

Replacement of the unserviceable Coarse / fine bubble membrane diffusers 600mm long all as specified and directed.

Testing of treated effluent for BOD from the authorised laboratory all as specified and directed

Taking down unserviceable pressure guage from position and Material and labour for pressure guage 4" dia, 0-21 Kg/cm2 rating complete all as specified and directed

Supplying and Fixing in repairs Butter fly valve 50mm dia Complete with all accessories .

Supplying and Fixing in repairs Butter fly valve 80mm dia Complete with all accessories .

Dismantling GI pipe 50 mm dia with all joints as in sludge pipe line from bottom of clarifier to sludge bed tank and refxing in existing position after cleaning and removing sludge blockage all as specified and directed. (Note:- Rate deemed to be inclusive for necessary excavation and refilling of soil for refixing the GI pipe line)

Cleaning the Surroundings of STP / SPH area by cutting/lifting the bushes, cutting and uprooting grass, vegetation shrubs, bushwood undergrowth, roots and trees not exceeding 30 cm girth (upto 01 metre height above ground level) and removing rubbish to a distance upto 50 metres outside the periphery of the area, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing PVC insulated & PVC sheathed industrial copper conductor cable for submersible pump motors, flat three core of nominal area of conductor 4 sqmm, 1100 Volts, conforming to IS: 694 including taking down old U/S cable complete all as specified and directed. Make: Havells or equivalent.

Dismantling Carefully the existing centrifugal pump set of capacity of 5.0 HP from the site and refixing the same on new angle iron base frame of size 1.20 mtr length and 0.50 mtr width made of Angle iron 65x65x6mm including suitable size nuts, bolts and washers in replacement of old corroded base frame and re-alignment properly complete all as specified and directed.

Taking up the Unserviceable UG cable of size 10 sqmm 2 core, Supplying and Laying XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, LT UG cable 1100 Volts with stranded aluminimum conductor of size 10 Sqmm 2 core complete all as specified and directed.

Taking up the Unserviceable UG cable of size 25 sqmm 3.5 core, Supplying and Laying XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, LT UG cable 1100 Volts with stranded aluminimum conductor of size 25 Sqmm 3.5 core complete all as specified and directed.

Material and Labour for G.I. tubing light grade of 50mm bore for cable protection to be laid under roads, crossings/culverts complete all as specified and directed.

Material and Labour for Preparation of old steel surfaces of any description over 10cm in width or girth applying one coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and direted.

Supplying and Fixing in repairs GM gate Valve of size 50 mm bore of ISI marked Complete all as specified and directed.

Material and Labour for G.I. tubing medium grade of size 50mm bore for protection of cables to be laid under roads, crossings / culverts Complete all as specified and as directed.

Material and Labour for G.I. tubing medium grade of size 80mm bore for protection of cables to be laid under roads, crossings / culverts Complete all as specified and as directed.

Material and Labour for Cleaning the Survival pool of capacity 2 lakh gallons once in a week all around and bottom of pool to remove the algae, by means of scrapping/ scrubbing the walls with wire brush, removing the sediments deposited at bottom with the help of suction sweeper complete all as specified and directed.

Material and labour for Cleaning the survival pool of Capacity 2 lakh gallons after draining out the water completely, acid cleaning all sides of pool to remove the algae, and scrubbing the walls with wire brush, removing the sediments deposited at bottom manually. Note: Rate deemed to be inclusive of all necessary chemicals / cleaning agents etc.

Material and Labour for Servicing pressure filter of Capacity 40000 GPH by opening pressure filter and taking down filter media of different sizes carefully, opening the strainer and reset the same after cleaning, washing the filter media with pressure water, refill the filter bed with media and topping up the short fall with new media, servicing the backwash system, replacing the u/s pressure gauge - 01 No of capacity 0-100 Kg/CM², testing & commissioning all as directed.

Material and Labour for Cleaning balancing tank of survival Pool of Capacity 50000 ltrs complete with:- (i) Cleaning the balancing tank with high pressure water jet to remove all masses, algae and dirt (ii) Taking out dirt and sludge with sludge machine and disposing the same to a safe distance. (iii) Scrubbing the internal walls/floor with industrial vacuum cleaner. (iv) Applying anti bacterial sterilization to walls and floor of balancing tank.

Material and labour for servicing of Mono block pump set 10 HP, opening the Pump and re-fixing, machining the pump shaft and shaft key ways, impeller etc and replacing the key, impeller nuts, gland packing, gland nuts and coupling as per existing size including re-fixing the same to the original position incl testing and commissioning complete.

Material and labour for Disconnecting the electric motor of capacity 10 HP from position, strip opening the motor, taking out the burnt copper winding wire from slots, cleaning the slots, rewinding with super enamelled copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional and checking the winding leak proof, refixing the motor with proper alignment with pump set, connecting up the electric connections testing & commissioning complete. Note:- Rate deemed to be inclusive of replacement of worn out sleeves & bearings.

Material and Labour for Servicing of air blower by opening of Air Blower and replacement of minor spares, gear oil, Motor belt, gasket, bearing and pressure gauge, cleaning of air filter and reassembling testing and commissioning all as directed.

Taking Out Unserviceable CI foot valve 100mm bore, Supply and fixing new CI foot valve of 100mm bore all as directed.

Taking Out Unserviceable CI foot valve 80mm bore, Supply and fixing new CI foot valve of 80mm bore all as directed.

Material and Labour for Servicing of Mono block suction pump set 3 HP, Opening the Pump and re-fixing, machining the pump shaft and shaft Key ways, impeller shaft holes etc and replacing the key, impeller nut, gland packing, gland nuts and coupling as per existing size including re-fixing the same to the original position and commissioning testing complete

Supply and fixing in repalcement of PVC hose pipe 40 mm dia

Supply and fixing in repalcement of PVC float valve 25mm dia

Supplying and mixing alum Crystal for survival pool all as specified and directed

Supply and mixing bleaching powder ISI marked for survival pool all as specified and directed.

Supply and mixing Copper Sulphate Powder grade I for survival pool all as specified and directed.

Supply and mixing Soda ash for survival pool all as specified and directed.

Supply and Fixing in repairs Ammeter digital type 0-50 Amps alongwith suitable CTs complete all as specified and directed. Make: AE/Havells/BCH/L&T.

Supply and Fixing in repairs Voltmeter digital type 0-500 Volts Complete all as specified and as directed. Make: AE/Havells/BCH/L&T.

Supplying and Fixing in repairs of indicator lamp assembly LED type Complete all as specified and directed by the Engr-in-Charge. Make: AE/Havells/BCH/L&T.

Supply and Fixing MCB SPN 6-32 Amps rating, 'C' series, 10 KA breaking capacity, 240V, 50 Hz AC Complete all as specified and as directed. Make: Indoasian/ Legrand / Havells or equivalent.

Supply and Fixing MCB SP 6 to 32 Amps rating, 'C' series, 10 KA breaking capacity, 240V, 50 Hz AC Complete all as specified and as directed. Make: Indoasian/ Legrand / Havells or equivalent.

Supply and Fixing in repairs MCB DB SPN 4 way, Horizontal, Double door, 240 V, AC, 50 Hz, with sheet metal enclosure for MCB DP as Incomer and SPN MCBs as Out going, IP-43 protection conforming to IS-13032, universal mounting with copper bus bar 200 Amps, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides fixed on surface of walls of concealed Complete all as specified and as directed. Make: Legrand Cat No. 6077 10 or equivalent in standard/ L&T/ Havells

Removing of dewatered Semi dry sludge cake manually without disturbing the bed of sludge pit 02 Nos of size each 8.0m x 5.5m x 0.40m and depositing outside Akash Vihar complete all as directed.

Material and Labour for Cleaning the following RCC chambers by removing the sludge/ sediments from the bottom, Taking out dirt and sludge with sludge machine and disposing the same to a safe distance, scrubbing the internal walls/floor with industrial vaccum cleaner all as directed. (i) Manual bar screen of size 0.9 m length x 2.1 m wide x 3.00 m depth. (ii) Oil grease trap 02 Nos 2 m length x 1.8 m wide x 3 m depth and 2 m length x 1.94 m wide x 3m depth. (iii) Receiving sump 4.1 x 4.2 x 4.5 Mtr. (iv) Fab System 6.0 x 6.0 x 3.5 Mtr. (v) Tube settler 3.3 x 3.3 x 3.5 Mtr. (vi) Chlorine contact tank 1.7 x 3.6 x 2.5 Mtr. (vii) Treated water storage tank 3.5 x 3.5 x 2.5 Mtr.

Supply and Spread clean and fine river sand screened between 1/16" to 1/18" mesh in the sewage drying beds including taking out the existing sand layers and disposing the same out side the area complete all as specified and directed by Engr-In-Charge.

Material and Labour for Servicing of close coupled sewage pump set of Capacity 4.0 HP (sq cage induction dry motor), including lifting from position carefully, opening the pump and re-fixing after carrying out repairs to achieve the desired discharge.

Material and Labour for Servicing of close coupled sewage pump set of Capacity 15 HP (sq cage induction dry motor), including lifting from position carefully, opening the pump and re-fixing after carrying out repairs to achieve the desired discharge.

Material and Labour for Servicing of sewage pump set Centrifugal type of 5HP capacity, opening the pump carefully, machining the pump shaft and shaft Key ways, impeller shaft holes etc and replacing the key, impeller nut, gland packing, gland nuts and coupling as per existing size including re-fixing the same to the original position and testing complete all as directed.

Disconnecting the Centrifugal pump electric motor of Capacity up to 5 HP from position, strip opening the motor, taking out the burnt copper winding wire from slots, cleaning the slots, rewinding with super enamelled copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional and checking the winding leak proof, refixing the motor with proper alignment with pump set connecting up the electric connections testing & commissioning Complete. Note: Rate deemed to be inclusive of replacement of worn out sleeves & bearings.

Material and Labour for dismantling the Air Blower of capacity 395 cum/hr, transporting the same to auth service centre for servicing and replacing the following - Gear oil servo (mesh sp 460-400 ml), grease HP -T150NA -2, oil seal 02 Nos, roller bearing NU-307, angular contact, ball bearing, sleeves all as per existing and cleaning of air filter, reassemble, testing and commissioning complete all as specified and directed. Make of Blower - Kulkarni model SR 044.

Material and Labour for Servicing of bleaching dozing pump including replacement of worn out parts and re-assembling including testing and commissioning complete all as directed.

Supplying and Fixing in repairs Air blower belt as per existing size complete all as specified and directed. .

Disconnecting the electric motor of capacity 20 HP from position, strip opening the motor, taking out the burnt copper winding wire from slots, cleaning the slots and rewinding with super enamelled copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional and checking the winding leak proof, refixing the motor with proper alignment with pump set, connecting up the electric connections testing & commissioning complete. Note: Rate deemed to be inclusive of replacement of worn out sleeves & bearing.

Disconnecting the electric motor of capacity 7.5 HP from position, strip opening the motor, taking out the burnt copper winding wire from slots, cleaning the slots and rewinding with super enamelled copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional and checking the winding leak proof, refixing the motor with proper alignment with pump set, connecting up the electric connections testing & commissioning complete. Note: Rate deemed to be inclusive of replacement of worn out sleeves & bearing.

Repairs to Star delta starter of Capacity 2 HP to 5 HP Pump set by replacement of coil, contact kits etc., for making the starter functional complete all as directed

Repairs to Star delta starter of Capacity 7.5 HP to 15 HP Pump set by replacement of coil, contact kits etc., for making the starter functional complete all as directed

Alignment of Blower units connected with air distribution delivery lines complete with flexible joints and servicing of connected non return valves for minimising the vibration and arresting leakages complete all as directed.

Dismantling carefully the existing Centrifugal pump set of Capacity of 7.5 HP from the site and refixing the same on new angle iron base frame of size 1.20 mtr length and 0.50 mtr width made of Angle iron 65x65x6mm including suitable size nuts, bolts and washers in replacement of old corroded baseframe and re-alignment properly complete all as specified and directed.

Taking out the u/s single phase preventer from position, Supply and fix single phase preventer suitable for upto 20 HP motors, 3 phase, 415 Volts including all necessary wirring. Make : Minilac or equivalent

Taking out u/s plastic media, Material and labour for new plastic media in FEB system as per existing media all as directed

Supply of Calcium based granular disinfectant more stable than chlorine gas & stronger than bleaching powder and sodium hypochlorite for treatment of purified water.

Supply and Fixing in repairs Butterfly Valve 100mm dia Cast copper alloy screwed down high pressure with iron wheel screwed both sides for iron pipe confirming to IS 13095 and fixed Complete all as specified.

Material and Labour for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earth strip 32x6 mm by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., Complete all as specified and as directed. Note: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point. (ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber.

Excavating in Trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes, laying of pipe lines etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard / dense soils all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in Soils complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

Supply and Fixing PVC insulated & PVC sheathed industrial copper cable for submersible pump motors, flat three core of nominal area of conductor 6 sqmm,1100 Volts, conforming to IS: 694 in replacement of old detriorated cable complete all as specified and directed. Make : Havells or equivalent.

Supply and Fixing PVC insulated & PVC sheathed industrial copper cable for submersible pump motors, flat three core of nominal area of conductor 4 sqmm,1100 Volts, conforming to IS: 694 in replacement of old detriorated cable complete all as specified and directed. Make : Havells or equivalent.

Cleaning of Sewage Intake Circular Chamber of size 6 metre dia and 4 metre depth by removing the sludge manually/pumping and depositing outside the camp area as directed.

Material and Labour for Servicing of Non Clogging sewage submersible pump sets 6 HP, lifiting from position opening the Pump and re-fixing the same after carrying out repairs including replacing of minor parts to achieve the desired discharge, testing and commissioing Complete all as directed.

Taking out the Unserviceble starter from position and Supply and Fixing Fully automatic Star Delta starter suitable for submersible pump set of capacity 15 HP, AC 3 phase, 415 Volt, 50 Hz with sheet metal enclosure (Conforms to IS:13947-Part IV) incl single phase preventer Complete all as specified and directed.

Material and Labour for Servicing of Non Clogging sewage submersible pump sets 7.5 HP, lifiting from position opening the Pump and re-fixing the same after carrying out repairs including replacing of minor parts to achieve the desired discharge, testing and commissioing Complete all as directed. Make: Havells or equivalent in Legrand / Indoasian.

Material and labour for servicing of Non Clog centrifugal pump set of capacity upto 20HP, by means of opening the sewage pump carefully, machining the pump shaft and shaft Key ways, impeller shaft holes etc and replacing the key, impeller nut, gland packing, gland nuts and coupling as per existing size including re-fixing the same after all required repairs to the original position and testing complete all as directed.

Disconnecting carefully the electric motor of Capacity 15 HP from position, strip opening the motor, taking out the burnt copper winding wire from slots, cleaning the slots, rewinding with super enamelled copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional and checking the winding leak proof, refixing the motor with proper alignment with pump set, connecting up the electric connections testing & commissioning complete.

M/S J S PRAKASAM