PROVISION OF STOWAGE SPACE FOR POLLUTION RESPONSE EQUIPMENT AT HALDIA

Amount

Schedule "A" Part – I to Schedule "A" Part – XI: NOTE: Schedule "A" Part – I to Part – X are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lump Sum price worked out by the contractor for "BUILDINGS & STRUCTURES WORK", for the lumpsum price of Rs. 2,81,00,000.00 inserted by MES as listed in Schedule 'A' Part - I on Serial Page No. 33 (R)

Price worked out by the contractor for "PILE WORK", against the price of Rs. 91,69,033.75 inserted by MES as listed in Schedule 'A' Part - II on Serial Page No. 34(R)

Price worked out by the contractor for "EARTH WORK AND AREA DEVELOPMENT WORK", against the price of Rs. 1,38,033.6 inserted by MES as listed in Schedule 'A' Part - III on Serial Page No. 35 (R)

Price worked out by the contractor for "INTERNAL WATER SUPPLY WORK", against the price of Rs. 42,491.40 inserted by MES as listed in Schedule 'A' Part - IV on Serial Page No. 37 (R)

Price worked out by the contractor for "INTERNAL ELECTRIC SUPPLY WORK", against the price of Rs. 4,52,119.75 inserted by MES as listed in Schedule 'A' Part - V on Serial Page No. 40 (R)

Price worked out by the contractor for "EXTERNAL WATER SUPPLY WORK", against the price of Rs. 1,06,299.82 inserted by MES as listed in Schedule 'A' Part - VI on Serial Page No. 41 (R)

Price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY WORK", against the price of Rs. 3,65,389.52 inserted by MES as listed in Schedule 'A' Part - VII on Serial Page No. 42 (R)

Price worked out by the contractor for "AREA DRAINAGE WORK", against the price of Rs. 1,38,432.27 inserted by MES as listed in Schedule 'A' Part - VIII on Serial Page No. 43 (R)

Price worked out by the contractor for "SEWAGE DISPOSAL WORK", against the price of Rs. 1,07,497.12 inserted by MES as listed in Schedule 'A' Part - IX on Serial Page No. 45 (R)

Price worked out by the contractor for "ROAD, PATH, HARDSTANDING AND CULVERT WORK", against the price of Rs. 13,84,665.17 inserted by MES as listed in Schedule 'A' Part - X on Serial Page No. 48 (R)

Schedule "A" Part - XI [Miscellaneous Items]

INTERNAL ELECTRIFICATION

Item No 1 : M&L for point wiring complete with PVC insulated and sheathed cable, FRLS, 1.5 sq mm (nominal area) stranded copper conductor single core conforming to IS : 694 including medium duty concealed PVC conduit conforming to IS : 9537 ( Part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 2 mm thick of reqd. size (factory made) including painting terminal boxes inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer and with top cover 3 mm thick of plastic laminated sheets of required colour,complete with all accessories and all as specified including PVC insulated and unsheathed cable 1.5 sqmm (nominal area) stranded copper conductor single core conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete for the following :-

(a) One light point/security light/ceiling/exhaust/wall mounted fan controlled by one switch

(b) One 3 pin socket outlet , 5 Amps on an independent board controlled by one switch .

(c) One 3 pin socket outlet , 5 Amps on same board controlled by one switch .

(d) One light point controlled by two way switch

Item No 2 : M&L for point wiring for one 3 pin socket outlet 15 amps on independent board complete with PVC insulated and sheathed cable, FRLS, 4 sq mm (nominal area) stranded copper conductor single core conforming to IS : 694 including medium duty concealed PVC conduit conforming to IS : 9537 ( Part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 2 mm thick of reqd. size (factory made) including painting terminal boxes inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer and with top cover 3 mm thick of plastic laminated sheets of required colour,complete with all accessories and all as specified including PVC insulated and sheathed cable 2.5 sqmm (nominal area) stranded copper conductor single core conforming to IS : 694 of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete.

Item No 3 : M & L for 1 X 20 watt LED ceiling/wall mounted lighting fixture with Lamp Lumen not less than 2100 lumen polycarbonate ,enviornmental friendly ,energy efficient fixed to wall/ ceilling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed. CAT Part No : LTTB20 of Crompton or equivalent make as appproved by GE .

Item No 4 : M&L Energy efficient, LED ceiling/wall mounted lighting fixtures 1X10 Watt with lamp , 230 Volt surface mounted polycarbonate body, environmental friendly, fixed to wall/ceiling including connecting up to ceiling roses with twin core twisted flexible 1.5sqmm PVC copper conductor cable with earthing complete all directed. CAT Part No : LTTB10 of Crompton or equivalent make as appproved by GE .

Item No 5 : M&L Energy efficient, LED ceiling/wall mounted lighting fixtures 1X35 Watt with lamp , 230 Volt surface mounted polycarbonate body, environmental friendly, fixed to wall/ceiling including connecting up to ceiling roses with twin core twisted flexible 1.5sqmm PVC copper conductor cable with earthing complete all directed. CAT Part No : LTTB35 of Crompton or equivalent make as appproved by GE .

Item No 6 : S&F LED Security light fitting with driver of 1X35W, with HF electronic driver pre wired with 1.5 Sqmm copper conductor cable upto connector suitable for 40mm dia pole of GI tubing Med grade bend to shape fixing on wall with suitable MS brackets and clamps complete all as specified and as directed. Make: CAT Part No : LSTP-35-CDL of Crompton or equivalent make as appproved by GE

Item No 7 : MCB single pole (SP), 06-32 amps, 240 volts, 10 KA, 'B' series with all incoming / outgoing connections with proper size of copper lugs complete all as specified as directed. Note:(i) Cost of copper lugs shall be included in the unit rate.

Item No 8 : MCB single pole and neutral (SPN), 32-40 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of copper lugs complete all as specified as directed. Note:(i) Cost of copper lugs shall be included in the unit rate.

Item No 9 : Sub main wiring with 02 runs of 10 sqmm and 01 run of 10 sqmm , FR, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, ISI Marked, drawing through and including concealed PVC rigid conduit not less than 20mm dia. complete with necessary fittings such as junction boxes couplings, unions bends reducers, inspection elbows, plugs, sealing conduits etc complete all as specified and directed . ( Note: 3 runs of 10 Sqmm cable and one run of conduit will be measured as one unit i.e RM).

Item No 10 : S&F LED bulb 9 Watt pin type system lumen not less than 770 Lumen complete all as specified and directed.

Item No 11 : Cast iron/pressed steel terminal boxes 60mm deep with 3mm thickplastic laminated sheet cover of size 100mmx100mm S complete all as specified and directed.

Item No 12 : Telephone jack RJ11 single with shutter for telephone and intercom connection complete all as specified and directed.

Item No 13 : Telephone cables with high density polyethylene insulated, solid annealed high conductivity bare copper with dia 0.5 mm, paired polyester taped and sheathed with high oxygen index fire retardant PVC compound, conforming to ITDG/WIR-06/02 May 94 of 1 pair drawn through PVC conduit and connecting, testing complete all as specified and directed . Note: PVC conduit and accessories shall be measured and paid seperately under resspective item.

Item No 13A : Highbay LED light 80 watt with IP65 protection and fixing accessories etc complete all as specified and directed. Make: Crompton Mdel surround neo CAT Part No : LHB11-80-CDL/60-M or equivalent make as appproved by GE in Havells/Philips/Bajaj.

Item No 13B : Sub main wiring with 02 runs of 1.5 sqmm (nominal area) single core PVC insulated ,stranded , unsheathed FRLS copper conductor cable upto and incl rigid PVC non metallic surface conduit medium duty with conduit accessories such as junction boxes couplings, unions bends reducers, inspection elbows, plugs, sealing conduits etc including 01 run of 1.5 sqmm (nominal area) , single core PVC insulated ,stranded , unsheathed FRLS copper conductor cable as earth wire and duly connected to common earth point complete with necessary fittings complete all as specified and directed . ( Note: 3 runs of 1.50 Sqmm cable and one run of conduit will be measured as one unit i.e RM).

EXTERNAL WATER SUPPLY

Item No 14 : Cutting existing GI pipe 80mm dia/bore and inserting flanged Tee for new connection of size 40mm dia complete all as directed by Engr-in-Charge.

EARTHINGS

Item No 15 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

PILE FOUNDATION

Item No 16 : Boring for bored cast in situ piles 600mm dia in any type of soil/clay/soft rock except hard rock/fractured rock and getting out and disposal of spoil to a distance not exceeding 50 M using hydraulic rig method complete all as specified and directed.

Item No 17 : Boring for bored cast in situ piles 600mm dia in hard rock/fractured rock and getting out and disposal of spoil to a distance not exceeding 50 M using hydraulic rig method complete all as specified and directed.

Item No 18 : Boring for bored cast in situ piles 500mm dia in any type of soil/clay/soft rock except hard rock/fractured rock and getting out and disposal of spoil to a distance not exceeding 50 M using hydraulic rig method complete all as specified and directed.

Item No 19 : Boring for bored cast in situ piles 500mm dia in hard rock/fractured rock and getting out and disposal of spoil to a distance not exceeding 50 M using hydraulic rig method complete all as specified and directed.

Item No 20 : Chipping out pile upto cut off level including initial load disposal upto a distance of 50M all as specified and directed.

Item No 21 : Carrying out following routine load testing on 600mm dia piles complete all as per IS and as directed including necessary anchoring and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 22 : Carrying out Pile Integrity Test on 600mm dia piles all as per IS and as directed.

Item No 23 : Carrying out following initial load testing on 500mm dia piles complete all as per IS and as directed including necessary anchoring and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 24 : Carrying out following routine load testing on 500mm dia piles complete all as per IS and as directed including necessary anchoring and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Lateral test

Item No 25 : Carrying out Pile Integrity Test on 500mm dia piles all as per IS and as directed.

AIR CONDITIONING

Item No 26 : Supply, installation, commissioning of air cooled split unit air conditioner, electric driven, single phase capacity of 2TR, BEE 5 star rate, inverter type with green gases complete as directed by Engr-in-Charge.

Item No 27 : Supply, installation, commissioning of air cooled split unit air conditioner, electric driven, single phase capacity of 1.5 TR, BEE 5 star rate, inverter type with green gases complete as directed by Engr-in-Charge.

Item No 28 : Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 160 V to 240 V with output voltage stabilized at 230 V with accuracy of +2.5% and of capacity 3.0 KVA complete.

INTERNAL WATER SUPPLY

Item No 29 : Angle cocks 15mm dia, fancy type, cast copper alloy, chromium plated with cup, screwed down, high presure, screwed both ends for iron pipe or for unions and fixed complete all as specified as directed.

EXTERNAL ELECTRIC SUPPLY

Item No 30 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 50 sqmm cross-sectional area, complete all as specified and as directed.

Item No 31 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 3.5 core, 35 sqmm cross-sectional area, complete all as specified and as directed.

Item No 32 : Supplying & laying XLPE insulated screened PVC embedded, galvanized steel strap or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, 2 core, 10 sqmm cross-sectional area, complete all as specified and as directed.

Item No 33 : S&F LED Street light luminaire with driver of 1X70W pressure die-cast aluminium housing with IP 66, with HF electronic driver pre wired with 1.5 Sqmm copper conductor cable upto connector suitable for 40mm dia pile of GI tubing Med grade bend to shape fixing on pole/wall with suitable MS brackets and clamps complete all as specified and as directed. Make: CAT Part No : ENDURACITYLINERNEOSL70WLED757PASYBOTG of Havells or equivalent make as appproved by GE.

Item No 34 : Connection of street light with twin core PVC insulated unsheathed, 1100 Volts grade, (FR-LSH) copper cable 2.5 sqmm stranded conductor and drawing through and including rigid PVC non metallic surface conduit medium duty (ISI marked) with conduit accessories such as junction boxes, bends, tees etc including continuous earth wire PVC insulated unsheathed 1100 Volts grade, cable 1.5 sqmm copper conductor and connected to common earth dolly complete as directed. Note: 2 runs of 2.50 Sqmm cable and 1 run of 1.50 Sqmm cable and 1 run of PVC conduit including fittings shall be measured as one unit i.e RM).

Item No 35 : S&F PVC cable end terminal boxs outdoor type , outside 170x170x105 and inside 140x140x95, with PVC door provision of incoming and outgoing cables from bottom, comprising of two MCBs SP 6-32 Amps,cable glands and one porcelain connector , four way complete fixed on wall/poles with necessary clamps, screws etc duly painted complete all as specified and as directed. Make: CAT Part No : GSJB 1414 of Sintex or equivalent make as appproved by GE .

EARTHINGS

Item No 37 : Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

EARTH WORK

Item No 38 : Supply only approved earth from outside the MOD land and bringing to the site and compacted in layers not exceeding 25cm thick including spreading, levelling, watering and well ramming , of excavated soil of any type complete all as specified. Note:- (i) A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. (ii) Earth required in the item shall be from outside the MOD land and bringing to the site under their own arrangement. (iii) All cost of procurement of earth such as cost of transportation, royalties, taxes etc shall be deemed to be included in the unit rates quoted by the bidder. (iv) The earth supplied shall be used for filling. Finished embankment/traverse of filled earth consolidated/compacted shall be considered for measurement purpose and volume shall be calculated based on these measurements.

UNIVERSAL TRADING

M/S N C BANERJEE AND SON

JANARDAN NIRMAN PRIVATE LIMITED