Construction of community hall is in Amargol village ward no. 29, (Continued work) Hubballi city of dharwad district.

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

Providing and fixing 12 mm thick frameless toughened Glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic ...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end ...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, ...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

WATER SUPPLY AND SONITORY WORKS GROUND FLOOR

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 25 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 50 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...

Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work s...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing roofing consist of 0.8 mm thick Galvanized steel Deck Sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including ed...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c...

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, ...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing and fixing 12 mm thick frameless toughened Glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic ...

WATER SUPPLY AND SONITORY WORKS FIRST FLOOR

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 25 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 50 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ...

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

Electrical work

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mmthick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woo...

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mmthick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woo...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metalPVC Junction boxes, adhesive paste etc.,...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metalPVC Junction boxes, adhesive paste etc.,...

supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Point wiring using Copperwire without switch.Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) F...

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) ...

Point wiring using Copperwire without switch.Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) F...

Wiring for lightingpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694...

Wiring for lightingpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-6...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-6...

Wiring for lightingpower circuit using one of FRLS PVC Insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-6...

Supplying and flush mounting powder coatedgalvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 3.4.1)1...

Supplying and flush-mounting a powder-coatedgalvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brickstoneR...

Supplying and flush-mounting a powder-coatedgalvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brickstoneR...

Supplying and flush-mounting a powder-coatedgalvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brickstoneR...

Supplying and flush-mounting a powder-coatedgalvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brickstoneR...

Supplying and flush-mounting a powder-coatedgalvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brickstoneR...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.1)6Amps one way. PWD,Elct, SR-2023-24 Page No. 9 Item code 3.6.1

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.1)6Amps Two way. PWD,Elct, SR-2023-24 Page No. 9 Item code 3.6.2

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293.3.6. 10) 616Amps universal socket PWD, Elct, SR-2023-24 Page No. 9 Item c...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.3)6Amps 3way socket PWD,Elct, SR-2023-24 Page No.9 Item code 3.6.3

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.7)16A One Way Switch PWD,Elct, SR-2023-24 Page No.9 Item code 3.6.7

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.4)Stepped Fan Regulator Two Module PWD,Elct, SR-2023-24 Page No.9 Item ...

Supplying And fixingreplacing of 61632A electricalaccessories on existing switch board. 3.14.5)6A Bakelite Ceiling Rose PWD,Elct, SR-2023-24 Page No.10 Item code 3.14.5

Supplying And fixingreplacing of 61632A electricalaccessories on existing switch board.3.14.7)6A Batten Holder PWD,Elct, SR-2023-24 Page No.10 Item code 3.14.7

Supplying of feet - PVC Batten with integrated LED tube ..W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V @ 5060Hz & Power facto...

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V @ 5060Hz & Po...

SupplyofroundsquarerecesssurfacemountedrollingtypeLEDDownlightwith......WGU10LEDLampRibFabricatedfromdiecastaluminiumwithwhitepowdercoatedprewiredtomainsconnector&hasswivellingunitofaluminiumdiecastey...

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 230.0076” twin twisted PVC insulated wires, requir...

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 230.0076” twin twisted PVC insulated wires, requir...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Fixing a ceiling wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 230...

Extra length of GI pipe of class B 19mm dia for down rod PWD,Elct, SR-2023-24 Page No. 57 Item code 13.12

Supplying & fixing of Porcelain fuse channel with cut out on existing woodenpanel using necessary nuts, bolts and washers. 5.7.3)63Amps PWD,Elct, SR-2023-24 Page No. 14 Item code 5.7.3

Supplying and fixing miniature circuit breakers (MCBs) on existing MCB distribution boards, including all necessary fixing materials, C-type curve, ONOFF indicator, energy cross, with a short-circuit ...

Supplying and fixing miniature circuit breakers (MCBs) on existing MCB distribution boards, including all necessary fixing materials, C-type curve, ONOFF indicator, energy cross, with a short-circuit ...

Supplying and fixing miniature circuit breakers (MCBs) on existing MCB distribution boards, including all necessary fixing materials, C-type curve, ONOFF indicator, energy cross, with a short-circuit ...

Supplying and fixing miniature circuit breakers (MCBs) on existing MCB distribution boards, including all necessary fixing materials, C-type curve, ONOFF indicator, energy cross, with a short-circuit ...

Supplying and fixing regular MCB distribution boards on wallwoodboard flush mounting using required clamps, bolts, nuts etc., withprovision for fixing suitable type capacity MCB's single phase3phases...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

MS Box Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided ...

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolicFRPDMC insulator w...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 5.11.2) 100APWD,Elct, SR-2023-24 Page No.15 Item code 5.11.2

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. 5.38) PWD,Elct, SR-2023-24 Page No.19 Item code 5.38

Supplying, fixing and wiring 505 to 4005Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.5.34 PWD,Elct, SR-2023-24 Page No.19 Item code 5.34

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.5.8.1)63 A PWD,Elct,SR-2023-24 Page No.15 Item code 5.8.1

Supplying and fixing HRC fuse units base on existing switch

panel board.5.9.2)32 to 63 A PWD,Elct,SR-2023-24 Page No.15 Item code 5.9.2

Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703.5.10.1)upto 63 A PWD,Elct,SR-2023-24 Page No.15 Item code 5.10.1

LED Street light.Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffu...

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or ra...

Supplying and fixing of retrofit type LED bulb of W with opal acrylic diffuser, comprising LED source with CCT 6500 K and CRI 70%. The efficacy shall be 80 lumens per watt, with a life of 25,000 bu...

Supplying, fixing, and wiring earth electrode for grounding of lifts, transformers,DG sets, etcusing a 40 mm diameter, 2.9 mm thick, 2.5 m long GI pipe, complete with GI funnel, wire mesh, and suitabl...

GICopper strips for grounding connections, using necessary fixing materials as required. GICopper strips 25 x 3 mm GI strip Page No.54 Item code 12.58.2

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 32.11)...

HDPEPLB Pipe 4033 mm ESCOMS SR2023-24 Page No.30 Item code 66.05

50 Sqmm Copper Terminal, Apprx Wt: 26 Gm ESCOMS SR-2023-24 Page No.26 Item code 59.03

Brass Cable Gland 45 mm ESCOMS SR-2023-24 Page No.28 Item code 63.04

Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...

LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSMGPRS Modem (as per technical specification) upto 100 kVA D...

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting,finishing with necessary cement plastering complete...

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm ESCOMSSR2023-24 Page No.52 Item code 21.06

Earth work excavation for pipelinescables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable35.01)Up to 4C x 50 Sqmm ESCOMSSR2023-24 Page No.15 Item code 35.01