REPAIRS TO GALVALUME SHEET ROOFING, MANGALORE TILE ROOFING, BOARDING, FALSE CEILING, PLASTERING AND CONNECTED WORKS AT CERTAIN MD AND OTM ACCN OF AGE B/R (WEST) AT COLABA, MUMBAI

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including use of scafoldings for any height complete all as specified and directed.

Dismantling of framed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling of framed work timber in fillets, rails, posts, rafters purlins, etc. under 40 sq.cm in section, in any position complete all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm & 1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as per manufacturers instructions on wooden/steel members including use of scafoldings for any height complete all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including use of scafoldings for any height complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F for joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas complete all as specified and directed.

S & F of structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including use of scafoldings for any height complete all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including use of scafoldings for any height complete all as specified and directed.

Material and labour in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood wheather boarding , clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including use of scafoldings for any height complete all as specified and directed.

Dismantling Mangalore pattern or similar tiles in roofing including portions bedded in cement mortar at any height including use of scafolding complete all as specified and directed.

Material and labour for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including use of scafoldings for any height complete all as specified and directed.

Fixing only roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including use of scafoldings for any height complete all as specified and directed.

Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 including use of scafoldings for any height complete all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 including use of scafoldings for any height complete all as specified and directed.

Dismantling of roof battens for tiles, shingles etc, of any size including tilting fillets spaced n exc 15 cm of any description in any position including use of scafoldings for any height complete all as specified and directed.

Material and labour second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including use of scafoldings for any height complete all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including use of scafoldings for any height complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description, not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including use of scafoldings for any height complete all as specified and directed.

Material and labour for preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including use of scafoldings for any height complete all as specified and directed.

Material and labour in repair to replace old decayed timber (including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including use of scafoldings for any height complete all as specified and directed.

Material and labour for preparing surfaces of wooden battens (new or old), any size and spacing, and treated all over with creosote (measured overall on one side only, spaces not deducted) including use of scafoldings for any height complete all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.

M & L for powder coated aluminium snap grid false ceiling having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running metre complete all as specified and directed.

S & F 9mm thick PVC laminated gypsum ceiling tiles of size 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil complete all as specified and directed.

Providing and fixing 12 mm thick gypsum board false ceiling at various levels inclusive of GI perimeter channels of size 0.55 mm thick having one flange of 20mm and another flange of 30 mm and web of 27 mm along with perimeter of ceiling, suspending GI intermediate channels of size 45mm, 0.90 mm thick with two flanges of 15 mm each, GI cleat and steel expansion fastener at every 610 mm center to center ceiling section of 0.50 mm thick fixed to intermediate channels with help of connecting clip and the board should be jointed and finished so as to have flush look which includes finishing the tapered and square edges of boards including cutting of false ceiling for AC machines, spot lights fixtures, fire / security system etc complete all as specifed and directed.

Taking down cement plaster of any description from brick wall surfaces, ceiling etc including racking out joints and hacking for key, scrubbing down with water etc including use of scaffolding for any height and removing debries out side MD land complete all as specified and directed.

M & L for cement mortar (general purpose, factory made, for outdoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg percubic metre, dry density after setting 1800 kg per cubic metre, pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder, and chemical additives) for external rendering 12mm thick on brick wall or concrete surfaces, with using liquid water proofing compound as per manufacturers instructions including making groove of appropriate size and finishing sand faced finish using sponge complete all as specified and directed. Note: Liquid WPC will be measured and paid seperately as supply only. Name of Manufacturer: M/s Premier Floor to Roof Materials Pvt Ltd. / M/s Walplast Products Pvt Ltd. / M/s Ultratech Cement Ltd. / M/s Sound Buildcare Pvt Ltd. as approved by GE.

M & L for cement mortar (general purpose, factory made, for Indoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg percubic metre, dry density after setting 1800 kg per cubic metre, pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder, and chemical additives) for internal rendering 10mm thick on brick wall or concrete surfaces including making groove of appropriate size and finishing the surface even and smooth without using extra cement complete all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials Pvt Ltd. / M/s Walplast Products Pvt Ltd. / M/s Ultratech Cement Ltd. / M/s Sound Buildcare Pvt Ltd. as approved by GE.

M & L for preparing New surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer through authorised applicator of paint manufacturers including use of scaffolding where required at any height for external painting complete all as specified and directed.

Supply only liquid water proofing compound.

M & L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) wall putty complete all as specified and directed.

M & L for 5 mm thick plaster in CM (1:3) on ceiling surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new or previously untreated steel and iron surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Frends Enterprises

Mayur Enterprises

Bright Construction Co

SHREE JAGDISH FURNITURE CO.

AGRAWAL ASSOCIATES

Anil Industrial Corporation

M/s Qureshi Construction Co

Bidder Name

AGRAWAL ASSOCIATES

Frends Enterprises

Anil Industrial Corporation

Mayur Enterprises

Vandan Enterprises

M/s Qureshi Construction Co

Bright Construction Co

SHREE JAGDISH FURNITURE CO.