PROVN OF SORTING OUT SHED WITH HARDSTANDING, PROVN OF 01 X DENTAL SURGERY ADJACENT TO BLDG NO P-60, REVENUE NO 21, 53 AND 70 AND MINOR NO 26 AND 34 UNDER GE (EAST) MATHURA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying cable etc and getting out in soft/loose soil complete.

M&L for cement concrete M-7.5 grade (Nominal Mix) using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.

Returning, filling in, in-cluding spreading, levelling, watering and well ramming in layers not exc 25 cm. thick complete all as specified and directed by Engr-in-charge.

Removing excavated soil to a distance exc 250 m but n exc 500 m and depositing where directed at a level of n.exc 1.5 m above the starting point all complete all as directed.

M&L for providing 40 mm thick Damp proof course in cement concrete M-15 grade (Nominal Mix) using 12.50mm grade stone agregrete using stone aggregate to horizontal or vertical surfaces including necessary formwork

M&L Use & waste of steel formwork to sides of concrete (fair finish flat)foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for flat rough finished surface complete all as directed.

M&L for RCC M-25 grade (design mix) as in foundation, footings, plinth Beam and similar RCC works all as specified and directed.

M&L Use & waste steel form work to sides of pillars, posts and columns for rough finished flat surface square/rectangular of concrete complete all as directed.

M&L for RCC M-25 grade (design mix) as in Columns, pillars, piers, posts and struts & similar RCC works all as specified and directed.

M&L Use & waste of steel Form work to sides and soffits of floor or roof beams,lintiles cantilever etc for flat rough finished surface complete all as directed.

M&L for RCC M-25 grade (design mix) as in Beams, cantilevers, bressummers, lintels & similar RCC works all as specified and directed.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified.

M&L Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick wall.

M&L TMT bars 10mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., complete.

All as per item No. 14 above but 5mm to 10mm dia as in striups, spacers & binders all as specified.

M&L rendering 15 mm thick (10mm + 5mm) plaster on other than fair face of brick work in CM 1:4 and surface finished even and fair by mixing integral water proofing compound in finishing coat as per manufacturers instructions complete. Note :- WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound.

M&L for rendering 10 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed by Engineer-In-Charge.

M&L for Hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface.

M&L 75mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded stone aggregate as in sub floor all as specified & directed by Engr-in-charge.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for Glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat of cement mortar in 1:3 complete all as specified.

M & L for 50 mm thick plain cement concrete M-10 grade (Nominal mix) using 40 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:1 by weight complete all as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded fixed to wall with a shop coat of red oxide primer complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded fixed to wall with a shop coat of red oxide primer complete all as specified and directed.

S&F 3 mm Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L cement concrete M-10 grade (Nominal mix) useing 20mm graded stone aggregate as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose all as specified.

M&L for preparation of primed steel surfaces exc 10 cm in width or girth and applying two coat of synthetic enamel paint all as specified.

S&F 35mm thick IInd class Hard wood Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

M&L for 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Steel work in trusses fabricated with rectangular / Square hollow section, including special shaped, washers etc including cutting welding, bending in shape etc using tube of YST 310 grade confirming to to IS-4923 complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for preparation of new wooden surfaces any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out soft / loose soil complete.

M&L 100mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded stone aggregate as in sub floor all as specified & directed by Engr-in-charge.

M&L for 25 mm thick sand filling under floors or in foundations including watering and consolidation complete.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade made with grey cement and pigment complete all as specified and directed.

M&L for PCC M-10 grade (Nominal mix) using 20mm graded stone aggregate in plinth course, string course etc complete all as specified and as directed by the Engineer-in-Charge

Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.with or without reinforcement complete.

M&L Use & waste of steel Form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work for flat rough finished surface complete all as directed.

M&L for RCC design mix M-25 grade, using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like & similar RCC works all as specified and directed.

M&L use & waste of Form work to edges of suspended slabs n.exc 20cm such as roof slabs floor slab landing and similar work for flat rough finished surface complete all as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M &L for providing Cement concrete M-10 grade (Nominal mix) using 40 mm graded stone aggregate as in surface channels and drains complete.

M &L for providing Cement concrete M-15 grade (Nominal mix) using 12.5 mm graded stone aggregate as in coping complete.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surface of slab, beam & ceiling surfaces finished even and fair all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coats of oil bound distemper complete all as specified and directed.

M&L for newly plastered surfaces of wall and applying two coats of oil bound distember over one coat of primer over a coat of wall care putty not less than 1mm thick including preparation complete.

M&L for light shade coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for 20 mm thick Granite slack work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed in cement mortar 1:4 complete.

S&F powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L powder coated (Powder coating shall not be less than 50 micron of approved colour) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, complete all as specified.

S&F powder coated (powder coating shall not be less than 50 micron of approved colour) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position

S&F 5.5 mm Sheet glass, ordinary quality and glazing for fixing in aluminium windows, ventilator & door in squares n exc 0.5 sq. m in each pane.

M&L for prepration of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer all as specified and as directed by Engineer-In-Charge.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and webof 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

M&L for preparation of RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particels.Filling the cracks by crack filler providing PCC 1:3:6 at the places.Wherer slope is not proper of roof surface is uneven to maintain the proper roof slope. Providing 25 mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30% over slab and applying priming coat of epoxy primer with resin and haerdener with water du\ilution as per manufacturer instructions,applying 1st coat if solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 kg/Sqm and applying 2nd coat solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than liquid to 105 with consumption of 0.61 kg/Sqm over dried 1st coat complete all as specified and directed. Make : Asian Paints/Pidilite/STP/Thermax/Sikka

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigments, machine pressed, set, jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Supplying & fixing to wall and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Supplying & fixing to wall and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Taking up or down old GI tubing 15mm dia and connection including cleaning completed all as specified.

S&F in repair 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete. (Minimum weight 20mm-210gms).

S&F for Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm

S&F angle cock/stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed with ends for iron pipe or union and fixed of 15mm dia. Make :- Cat part No ESSCO APR-101053 all as approved by Engr-in-charge.

S&F CP brass bib tap elbow type long body and shank 15 mm bore complete all as specified.

Supply and fix waste pipe 750 mm long fixed to waste coupling and to grating complete all as specified and directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement dia of out let 75 mm including stainless grating fixed complete all as specified and as directed.

S&F in PVC (SWR) pipes type 'A' 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

Supply and fix 1000 litre capacity white colour triple layer ISI Marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)hoisted and fixed in position including making inlet/oulet connection and fitting tank connection complete all as specified and as directed.

S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F Welded steel wire fabric supplied and fixed to angle frame or steel members complete all as specified weight per square metre n exc 4 Kg.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F 100 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work

M&L for 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.

S&F 100 mm size Brass handles, cast type, polished bright complete.

S&F 25 mm size Magnetic catches for cupboards including fixing to frame and and connected plate to shutter complete all as specified and directed.

M&L for providing 25 mm thick cement concrete M-15 grade (Nominal mix) using 20 mm graded stone aggregate complete all as specified and directed.

M&L for Brickwork with old size fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan any radius in half brick thick, built in cement mortar 1:4 complete all as specified.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, laid dry complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 finished even & fair all as specified and directed.

M&L for providing precast cement concrete M-10 grade (nominal mix) using 20mm graded stone aggregate) as in cover slab complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying two coat of black bituminious paint over a coat of red oxide primer complete all as specified.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (Nominal mix) using 20mm graded stone aggregate as required depth of embedded portion of holdfast or lugsmeasured from the face of jamb into the wall - exc. halfbrick but n exc 150sqm complete.

M&L for joint, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e withing 20mm of the length indicated) complete.

M&L for rendering 10 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed.

S&F 18mm thick solid PVC kitchen PVC sheet one side prelam sheet kitchen cabinet shutter of density 600 kg/cum bent at 90 degree and finish all edges at level for making edge lipping/gending or 0.5mm thick PVC sheet lipping at all four edges using bonding lape etc complete all as specified and directed by Engr-in-Charge.

S&F 150 mm size Brass handles, cast type, polished bright complete.

M&L for 75mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Excavating over areas n exc 1.5 m deep and getting out in soft/loose soil complete.

Excavating over areas exc 1.5 m but n.exc 3 m deep and getting out in soft/loose soil complete.

Excavating over areas exc 3m but n.exc 4.5 m deep and getting out in soft/loose soil complete.

M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints laid in trenches.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints,hacking for key, scrubbing down with water, etc.

Demolition of concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level)

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves,lintels,etc; and cutting chases for concealed water tubing etc, and making, cutting not exc10 cm girth.

S&F 15mm bore bib tap, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repair vitreous china hand wash basin white, flat back, size 550 x 400 mm including brackets and including 15mm pillar taps fancy type, cast copper alloy, with capstan head chromium plated screwed down high pressure complete all as specified and as directed.

S&F in repair vitreous china bowl urinal flat back size 465x355x265mm white (min) wth grating and union for discharge pipe complete all as specified and as directed.

S&F 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.

S&F 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closed seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including 10 ltr capacity valve less syphonic actiom type flusing cistern ISI marked low level with inlet ball valve, float and handle & PVC flush pipe complete all as specified and directed.

S&F two way CP fancy type bib cock of superior quality with wall flange 15mm dia including fixing to pipe complete all as specified and as directed complete.

S&F in repair health faucet of superior quality ABS body with 8mm dia 1.2m long flexible tube and wall hook includingfixing complete all as specified and as directed.

S&F repairs toilet paper roll holder, Make :- Jaquar Cat part No ACN-1151N or equivalent.

S&F 15 mm bore PVC connection with PTMT nuts of length 450 mm.

S&F in repair stainless steel grating square 150mmx150mm size with waste hole complete.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames n.exc 1.5 sqm each complete all as specified.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

S&F factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Panelling plain colour PVC sheet to be fitted in MS frame welded/sealed to the style & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2010 complete all as specified.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodized complete.

S&F Brass Chromium plated Soap dish holder fixed to wall complete all as specified.

M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper over a coat wall care putty not less than 1mm thick over and including one coat of primer complete all as specified.

S&F viterious china squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including setting the trap and pan in concrete and pan in concrete and including 10 litre capacity PVC valve less syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of white wash complete all as specified.

Surface dressing n.exc 15cm deep in soft/loose soil.

S&F wash hand basin under counter wih fixing accessaries set size 480x370x200mm shape rectangular CA No CNS-WHT-701 of Jaquar or equivalent as approved by Engr-in-charge.

S&F CP chromium plated brass pilar cock suitable for counter top WHB Cat No : OPP -15001PM of Jaquar or equivalent make given under list of makes.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement all as specified.

S&F 110mm bore PVC (SWR) bends with acess door any radius all as specified and as directed.

S&F 32mm bore waste fittings, bras, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed

Filling under floors with soil obtained from excavated earth including spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required.

M&L for aluminium frame and grill (sliding, fixed or casement) powder cated (minium thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates inclduing joining cleat for fixing etc complete all as specified and directed.

M&L for 75mm power coated aluminium barrel tower bolts of extrubed section and fixed complete all as specified and directed.

M&L for 150mm power coated aluminium barrel tower bolts of extuded section and fixed complete all as specified and directed.

S&F 4 levers mild steel body mortice lock, vertical type, sixe 100mm fixed to aluminium door complete all as specified.

S&F Door closer aluminium die cast body hydraulically regulated, designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L 4mm thick designer non-asbestos fibre cement building board having fire resistance & mosture resistance properly. Make :- Everest, fixed on aluminium grid with screws complete all as specified and directed.

Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminkum conductor of size 10sqmm 2 core, laid in trenches/duct fixing on walls, poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing including connecting with suitable lugs, glands, nuts and bolts in existing panel from pole main panel box and testing, incl dismantling of old unsv cable of any size & type complete all as specified and directed.

Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminkum conductor of size 16sqmm 2 core, laid in trenches/duct fixing on walls, poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing including connecting with suitable lugs, glands, nuts and bolts in existing panel from pole main panel box and testing, incl dismantling of old unsv cable of any size & type complete all as specified and directed.

Removal of excavated surplus soil to a distance not exc 50mtr and depositing whre directed at a level n.exc 1.5 mtr above the starting point all as specified.

S&F GI pipe light grade complete including fitting for 50mm dia.

Supply and lay PCC cable class LV Type-I, flat size 250mm/15mmx40mm covers of suitable size required for LT cable all as specified and directed.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (phase- Red, Neutral - black, Earth- Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/ fixing accessories after cutting chases for conduits and sunken GI pressed steel terminal boxes covered with 3 mm thick phenolic laminated top sheet cover white for mounting switches sockets, bell push, regulators etc and making good to walls, floors etc complete for the following:-

One light point controlled by one switch 5amp.

One fan point controlled by one switch 5amp and one regulator.

One exhaust fan point controlled by one way switch 6amp complete.

One 3 pin 5amp socket point controlled by one switch on same board.

One 3 pin 5amp socket point controlled by one switch on independent board.

One light point controlled by one switch 6amp.

All as per item No. 156 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent complete all as specified and as directed .

Supply and Fixing fancy ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.

Supply and fixing fan regulator electronic step type 120watt, 2 Module complete all as specified.

Supply and fixing Modular socket 2-in-1, 5pin 6amp, combined 2 module complete all as specified.

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make: - Havells, Cat Part No: LUMILINEBS20WLED 865 SPC WH or equivalent to CG/Bajaj/Philips

S&F MCB distribution board, SPN 8 Way, double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

Supply & fixing MCB SP 6 - 32 Amps, 'B' series, bracking cap10KA complete all as specified and directed.

Supply & fix MCB SPN 40 Amps, 'C' series, bracking cap10KA, 240V complete all as specified and directed.

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure dia cast aluminium, top opening and maintenable with heat resistance toughened glass, built-in-short-curcuit protectio, over voltage protection and surge protection, IP-65 proction with luminarie efficienty of greater than 80Lumen/Wattt, Colour rendering (CRI) of 70 and co-related colour temperature (CCT) of 5700K. The luminaire should have 10KV surg protection, PF 0.9 and total harmonic distortion of THD 10%, voltage range of 140-280V including all connections complete all as specified. Make of fitting:- Havells (as per Cat Part No. ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC) or equivalent in Crompton Greaves/Bajaj/Philips/C&S (meeting all the above specifications). Make of LED: CREE/Nichia/Osram/lumiled/ Bridgelux.

M&L for street light bracket made out of 40mm dia medium grade GI pipe of 1.2m length bent to required shape suitable for fixing street light / security light fitting on Steel tubular pole / RCC pole / building wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts (clamp type - as per site requirement ) including two coats of aluminium paint over a coating of red oxide primer and Taking down of existing unserviceable rusted street light brackets with clamps, nuts and bolts etc . ,complete all as directed.

Supply and fix ceiling fan 1200mm sweep, energy saving models, pearl white/white in colour 350RPM 220volt 50Hz complete with canopy, down rod, fan blade, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost complete. Note: GI strip beyond 5.0Mtr length from earth electrode shall be measured and paid separately).

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

M&L for GI pipe 40mm dia, Medium grade, fixed in wall for hanging of ceiling fan complete work with grouting of hole in wall & fixed with PCC and making good disturbed surface all as specified and directed.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (phase- Red, Neutral - black, Earth- Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/ fixing accessories after cutting chases for conduits and sunken GI pressed steel terminal boxes covered with 3 mm thick phenolic laminated top sheet cover white for mounting switches sockets, bell push, regulators etc and making good to walls, floors etc complete

Supply and fixing sheet metal enclosure with socket plug top and socket single pole and neutral with a two pin and earth plug and socket complete with one signle pole MCB ISI marked including connections with copper lugs of suitable size provided in MCB of capacity 20amps all as specified.

Supply and fix voltage stablizer for automatic operation, single phase, naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stablizer at 230V with accuracy of 2.5% and of capacity of 5KVA.

Supply and Fixing Modular switch 16 Amp single pole one way, 1 Module all as specified. Make :- SSK/Anchor/Havells

Supply and Fixing Modular switch 16 Amp single pole one way, 2 Module all as specified. Make :- SSK/Anchor/Havells

Supply and fixing fancy lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified.

Supply and fixing Modular socket 2-in-1, 3 and 5pin 6/16amp, combined 2 Module complete all as specified.

S&F aesthetically designed 2'x2' LED recess mounting extruded aluminum housing Flat panel, soft-light and glare free symmetrical illumination of capacity 45 Watts. Make :- C&S Cat part No CYGNUS/45W/W or equivalent make in Philips, Crompton.

Supply and fix DP enclosure with a two pin and earth plug and socket complete with DP MCB of rating 20 Amps, 240 Volts complete with all conction as directed.

M&L for modular metal flush box, 6 module.

M&L for modular metal flush box, 8 module.

M&L for modular white cover plate with frame, 6 module.

Supply and Fix of water heater storage type electric capacity 25 ltr, BEE 5 Star rated complete all as specified and directed by Engr-in-charge.

Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 2TR BEE 5star rated.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed.

Supply and fixing switch piano flush button, single pole one way 5 amps complete.

Supply and fixing socket outlet flush type 2-in-1 3 pins 5Amp multipurpose complete all as specified.

Supply and fixing socket outlet flush type 2-in-1 3 and 5 pins 15Amp multipurpose complete all as specified.

Supply and fixing switch piano flush button, 15amp single pole one way all as specified.

Supply and Fixing LED 10W lamp suitable for normal holder (Base Cap B22) complete all as specified. Make:- Havells/Philips/Bajaj/CG.

S&F MCB distribution board, SPN 4 Way, double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

Supply and fix exhaust fan 250mm sweep non metallic longwith louvers complete suitable to work on AC, single phase, 230volts, 1400RPM, 50Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75sqmm and including making holes for air ducting of exhaust fan in circule/square shape or as per site requirement and cutting, chassing of fan complete including making good to disturb with cement mortar 1:3 and rubbish off the premises.

Supply and fix exhaust fan 300mm sweep alongwith louvers complete suitable to work on AC, single phase, 230volts, 1400RPM, 50Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75sqmm and including making holes for air ducting of exhaust fanin circule/square shape or as per site requirement and cutting, chassing of fan complete including making good to disturb with cement mortar 1:3 and rubbish off the premises.

M&L for Sub Main Wiring for with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof and including 4 Sqmm copper green colour earth wire incl cutting & chases( making good all to the disturbed surfaces as per existing) complete all as specified and directed by Engineer-in-Charge. Note :- Two run of 4 Sqmm single core cable, one run of 4 Sqmm earth wire & one run of PVC conduit will measured as one unit lenght.

Taking down carefully existing dehumidifier any type and any capacity and its connected accessories form its installed postion and re-fixing as directed to any location with inclduding all necessary fixing arrangements complete with connection all as directed by Engr-in-charge.

Supply and fixing wall mounted fan 400mm sweep complete suitable to work on AC single phase 230 volts supply and including fixing on wall as directed

M/S PREETI CONSTRUCTION

Ms Kamal Kant Agarwal