Special repair works to be carried out Avadi Commissionerate Police Quarters at Thirumullaivoyal in Chennai city

Amount

31) Weathering course

52) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a. 32mm dia

b) 25mm dia

63) Supply and fixing of 32mm dia PVC waste pipe and C.P couplings with required gratings of best approved quality

Electrical Arrangement 69) Supplying and fixing 15Amps 3 pin plug type socket

74) Charges for assembling and fixing of ceiling fan

76) 8 SWG wire

Annexure 1.15) Hire charges for engaging JCB for clearing and cutting of tree hurdles

2.15) Supplying and filling with Stone Dust

6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

16.6) Precast Jally ventilator 50mm tk.using standardised concrete mix M20 without vibrating charges a. Ground Floor

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

22.5.1) Supplying and fixing of following Aluminium furniture fittings (ISI) make a) 150 mm long Handles “D” type of various sizes with required screws

b) Aldrops of 200mm long and 12mm dia with required screws, bolts and nuts

c) Aluminium Door Stopper with Rubber Bush with required screws

d) 150mm long Tower Bolts of various lengths and diametre (with required screws)

23.1.8) TW styles & rails with 9mm thick BWR single leaf shutters with brass screws b. 900 x 2100 mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass

26.1) Flooring in C.C.1:5:10

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick

32.1.2) Pointing the Pressed Tile over the roof with cement mortar 1:3

33.2.1) Plastering in C.M. 1:5, 12 mm thick.

34.2.1) ) Plastering in C.M. 1:4, 12 mm tk.

37.3.1) White washing two coats using clean shell lime slaked

44.6) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre

51.1) Supplying and fixing of PVC water tank of capacity 750ltr

52.1) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a. 50mm dia

52.9) Supply and fixing of 50mm dia MS clamp set

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

54.2.1) Supplying and fixing of half turn C.P short body Tap of 15mm dia

56.3.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.2) Supplying and fixing of E.W.C.(White) 500 mm with "P" or "S" TRAP with double flapped seat & seat cover

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm dia UPVC Non Pressure pipe

b. 160 mm dia UPVC Non Pressure pipe

64.1.1) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable 5 amps flush type switch [Open Wiring] a) Light point With Ceiling Rose

b) Light point With out Ceiling Rose

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

65.1.1) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable FAN POINT controlled by 5 amps flush type switch (Open wiring)

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (Open Wiring)

67.1) Wiring 1.5 sqmm copper wire for open wiring for 5AMPS Socket at switch board itself

68.2.1) Wiring 1.5 sqmm copper wire for open wiring for 5AMPS Socket at convenient places (Open Wiring)

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with fitting

71.2) Supplying and fixing of 32 AMPS Triple pole main switch

75.2) Supply and delivery of following Electric Ceiling fan with ISI mark with blades a) 48" Electric fan 1200mm sweep

77.7.1) Run off mains with 2 wires of 2.5 Sqmm copper PVC insulated unsheathed single core 1.1KV cable(Open Wiring)

80.2) Supplying and fixing of 1 no of 450x375x20mm thick TW plank

82.3.1) SSupply and fixing of LED Street lighting luminaries suitable for fixing 30 watts LED lamp

84.3.1) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.( Open wiring)

105.1) Run off 4 wires of 4 Sq mm. PVC insulated unsheathed single core multi strand fire retardant flexible copper cable for 3 phase EB service connection

112.1) Supplying and fixing of 225 mm dia sweep AC exhaust fan

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 C x 35 sq.mm. PVC LTUG aluminium armoured cable

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 C x 35sq.mm. PVC LTUG aluminium armoured cable

171.2.8) Supply and Delivery of Single phase Submersible motor Pumpset with ISI mark IS8034 without Panel Board of capacity 20 LPM X 125m

171.2.9) Supply and Delivery of Three phase Openwell Submersible motor Pumpset 125LPM X 25m

175.3.1) Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) . Lower End

178) Earthing as per the ISI specification with an earth electrode of 2.1 m class 'B' GI pipe

180.2.1)Labour charges for laying of flat cable below ground level a) 3 core 2.5 sqmm PVC insulated and sheathed flat type copper cable .

180.2.2) Labour charge for laying of following PVC insulated and sheathed flat type copper cable (above GL) a) 3 core 2.5 sqmm PVC insulated and sheathed flat type copper cable .

207.3.5) Painting the Old walls with two coats of 1st class ready mixed plastic emulsion paint including thorough scrapping

207.4) Painting the old wood work with two coats of approved first class synthetic enamel ready mixed paint including thorough scrapping

207.4.2) Painting Two coats of Old Walls with ready mixed Exterior emulsion paint of first class quality paint of approved colour and shade or other similar works, including thorough scrapping

207.6) Painting the Old Iron work with two coats of approved first class synthetic enamel ready mixed paint of approved quality including thorough scrapping

212.1) Dismantling the damaged Plain cement concrete in all floors

213) Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures

213.1) Supply and fixing of SFRC Manhole cover with frame with locking arrangements of size 600mmx600mm

216) Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures

242.2.2) Dismantling the damaged floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay tiles / Cuddapah Slabs

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 9watts LED bulb

b) 12 watts LED bulb

255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

344.2) Supplying and fixing of Bevelled edge mirror 500 x 400 x 5.5mm

362.2.2) Suppling and laying of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3

503.1) Supply and laying of required dia of Nylon rope

615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwell a)Up to 5 Hp

615.3.1) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 2 Hp

616.4.1) Supply of following HDPE pipes for Submerssible pump in Borewell class 5 a) 32mm dia

619.2.1) Supplying and delivery of following materials of best approved quality a. 32mm Gate valve

619.9) Supplying and fixing of following dia GM Non return Valve a.50mm dia GM Non-Return valve

707.2.1) Supplying and laying 3 core 2.5 sqmm Flat copper cable

799.3) Charges for developing the borewell forthe entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

P.MANOHARAN (BID ID -1233963)

P SELLAPPAGOUNDER (BID ID -1233618)

dp constructions (BID ID -1233696)

M.M. ENGINEERS (BID ID -1233675)

S.S. ENTERPRISES (BID ID -1234453)

A.G.RAVICHANDIRAN (BID ID -1234061)

Bidder Name

P SELLAPPAGOUNDER

P.MANOHARAN

dp constructions

K.Saravanan

M.M. ENGINEERS

S.S. ENTERPRISES

A.G.RAVICHANDIRAN