Providing Street Light arrangement in Village Nagli Sakhpur, Nagla Nagli and Village Nagli Wazidpur Sector-130, 5 Percentage Village Abadi plot, Noida

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bol+B6ts nuts, washers, anchor plates etc completee in all respect.. PS No 651 (Make : Bajaj/Philips/Crompton/ Valmont/Transrail)

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect PS No. 1455 (A) AAA (Bajaj/Philps/Havells/Crompton) 5 Year Warranty

Supplying, installation, Testing & Commisioning of Standard 4 mtrs high (above ground) hot dip galvanized (glading of galvenisation average 70 micron or better as per IS2629 or equivalent) pole, with stiffener, chain allen bolt, post top fixture arrangement, foundation bolt, anchor plate template, nut and washers galvanized, factory finish, base plate of size 200 x 200 x 12mm etc complete as required. The pole shall be made of 3 mm thickness sheet with tolerance of +/- 5%. The column shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening a juction/looping box with heavy duty 3 phase 32 Amp connector with 16A DP MCB including al accessories complete as required.(Make &| model will be selected bt the client). (Make : Bajaj/Philips/Crompton/Transline)

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect complete in all respect PS No. 1423 AAA. Warranty 5 Years (Bajaj/Philps/Havells/Crompton)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS No. 501 . (Make-Havells/Grandley/Polycab/ Diatron/Gloster/Kalinga) b) 16 sqmm x 4 core

f) 70 sqmm x 3.5 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making onnection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504 a) 16 sqmm

e) 70 sqmm

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. PS. No. 725 (B)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PS No. 716