8433 REPAIR REPLACEMENT OF HIGH MAST LIGHTS PERIMETER SECURITY LIGHTS STREET LIGHTS ETC ALONGWITH CONNECTING ACCESSORIES AT NAVAL DOCKYARD UNDER GE NW KUNJALI

Amount

Taking down high mast light/street light fitting from street light/ Flood light/fountain light/Garden Light fitting from the site and street/highmast light of any height for repair & checking internal wiring cleaning complete & refixing the same on pole after rectification of defects/replacement of items.

Repair of high mast with the help of suitable tools and plants wiring of luminaire with all wiring material like PVC insulated PVC Sheathed flexible cable of suitable copper conductor core of 1.5 sqmm cable.

Over hauling High mast light of raising lowering system comprising double drum winch 6 mm diameter steel wire rope,travelling cable,connector,manual handle,junction box,lightening finial.(wiring material from junction box to individual luminaire & MCB in base compartment are not included included and part of installation).

Overhauling of highmast shaft in three section suitable for wind speed along with motor all as specified and directed.

Supply & fix in Repair steel wire Rope 6 mm all as specified and directed.

Supply & fix in Repar of High mast light gear box pulley all as Specified and Directed.

S & erecting in repair galvanized high mast light suitable of height 15/16 mtr for 6 to 9 lantern fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation as per height all as sspecified and directed incl taking down old unsv corroded pole. Make: Bajaj/Bansal/Crompton/Bajaj

Supply and erecting in repair 6 metre long GI octagonal pole with bottom size 130mm in each side and top size 70mm, 3.0mm thick base plate of size 220x220x12mm and single arm 1000x48.3x3.25mm including excavation, earth work in any type of soil, PCC as in foundation nuts, bolts, washers of any size including taking down old pole of any description complete all as directed. Note:- 1. Excavation, Earth work in any type of soil, PCC (1:3:6) type C2(using 40mm graded stone aggregate) for foundation and PCC (1:2:4) type B1 (using 20mm graded stone aggregate) for coping etc are deemed to be included in the quoted rate. 2. Dismantling of existing damaged pole are deemed to be included in the quoted rate. Make: Bajaj/Bansal/Crompton/Bajaj

M&L for scrapping old paint from steel tublar poles by wire brush not more than up to 12 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole no.all as specified and directed by engineer in charge

S &F LED Street light 120w powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens .make- C&S CAT No. LTESS120WLED/LS,or Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

S &F LED Street light 90w powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens .make- C&S CAT No. LTESS90WLED/LS,or Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

S &F LED Street light 45W Energy Saving and Environment friendly light fitting with 24 nos LED Light source 4800 lumens with electronic gear housed in Pressure diecast alluminium alloy LM6 with IP65 protection operating volt up to 240 volts Make: C & S Cat NoLTESS45WLED/LS.Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

Supply & Fix LED Bldg Security Light 25 watt : INDUS-E SERIES Power coated pressure die cast aluminium SMD LED Street Light with integraed lens complete all as specified directed.Make- C&S Cat part no- LTESS25WLED/LS Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

S &F in replacement to existing any type fitting by LED flood light 200W watt energy saving and environment friendly light fitting with electronic gear housed in pressure dia post aluminium housing LED flood light luminaires with IP66 Protection including all accessories complete all as specified and directed by Engr-in-charge.make: C & S Cat Part No-LTEF200WHPLED or Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

S &F in replacement to existing any type fitting by LED flood light 400W watt energy saving and environment friendly light fitting with electronic gear housed in pressure dia post aluminium housing LED flood light luminaires with IP66 Protection including all accessories complete all as specified and directed by Engr-in-charge.make: C & S Cat Part No-LTEFH400WHPLED or eqv in Philips, Polycab, Havells

Supply of LED garden light 9 w cylindrical shaped integral decorative LED bollard with Opal acrylic diffuser and IP 65 With all acessories including PCC foundation tapper plug bolts,nuts,screwed etc complete all as specified and directed by Engr-in-charge.Make -,C&S,LTGLCG9WLED OR HAVELLs,CG, Polycab,Bajaj, Philips, Surya

Supply & fix 40 Watt LED Post top made in die-cast aluminium housing with decorative clear transparent diffuser and IP65 Protection.make C & S cat NO . LTGLC40WHPLED/W OR Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

S &F 50Watt LED FLOOD: ORION -C SERIES COB LED flood light with pressure die cast aluminium ,complete with all acessories..make- C&S CAT PART NO-LTEFI50WHPLED,OR Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

S &F LED aviation light luminaires integral LED aviation light comprising of aluminium housing with polycarbonate enclosure,302 nos. LED are provided as per site Required .make-Bajaj, CAT PART NO-BGAV 302 LED OR Equivalent to HAVELLs,CG, Polycab,Bajaj, Philips, Surya

S &F LED twin aviation light luminaires integral LED aviation light comprising of aluminium housing with polycarbonate enclosure. LED are provided as per site Required .make- bajaj,shakti,CG

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 4 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 4 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

S & F in Replacement MS arms bracket (best pattern) for mounting two in nos street light fitting including clamps/nut/bolts & washer to brace the same properly with duly in synthetic enamel paint of two coat in silver colour complete all as specified and directed by the Engr -in -charge.

S & F in Replacement MS arms bracket (best pattern) for mounting One in nos street light fitting including clamps/nut/bolts & washer to brace the same properly with duly in synthetic enamel paint of two coat in silver colour complete all as specified and directed by the Engr -in -charge.

S&F cable junction 4 module boxes IP 66/67 weather proof for out door installation(with knock outs cable entry junction box size should be with MCB from .5 to 4 amps including complete fittings of box on appropriate size of iron angle/strip all accessories specified and directed. Make -Legrand cat part no-Plexo/ Hensel 2500G

Excavation in trenches not exceeding 1.5 Mtrs. wide and not exceeding 1.5 Mtrs. in depth for foundation, laying of cablesetc and getting out in hard/dense soil complete all as specified.

Removing excavated material (Soil) n.exc 50 m and depositing where directed at a level n. exc 1.5 Mtrs. above the starting point complete all as specified.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm depth in soil.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed.

Supply and lay bricks of Class LV, Type I, flat, size 250mm x 150mm x 40mm for protection of U/G cable in trenches all as specified and directed.

Supply and fix Galvanised steel tubing, light grade, with fittings and MS clamps, nuts, bolts etc of 50 mm dia bore for cable protection on pole, road crossing or ground in pillars for fixing gate light etc complete all as specified.

Supply and fix Galvanised steel tubing, light grade, with fittings and MS clamps, nuts, bolts etc of 100 mm dia bore for cable protection on pole, road crossing or ground in pillars for fixing gate light etc complete all as specified.

M & L for Over hauling of highmast light gear box all as specified and directed.

Repair of old defective flood light/fountain light/Garden Light fitting from the site opening checkibng and carryout necessary repair and replacement work on it including replacement of sutaible drivers and repairing /checking internal wiring cleaning complete & refixing the same at site after rectification of defects/replacement of items. The details of drivers are as under:-

Supply & fix in Repair 9 watt Pollard light driver.make as Per Existing

Supply & fix in Repair 90 watt street light driver .make as Per Existing

Supply & fix in Repair 25/20 watt street light driver.make as Per Existing

Supply & fix in Repair 48/45 watt street light driver.make as Per Existing

Supply & fix in Repair 140/120 watt street light driver.make as Per Existing

Supply & fix in Repair 60 watt street light driver.make as Per Existing

Supply & fix in Repair 200 watt Flood light driver.make as Per Existing

Supply & fix in Repair 120 watt Flood light driver.make as Per Existing

S & F in repair Distribution Board timer panel Timelite-65A 3Pole/230V-Analog Time Switch double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting 230 volts etc complete all as directed. Make - Legrand or equivalent in siemens/GE.

S & F in repair Distribution Board timer panel Timelite-32A single Pole/230V-Analog Time Switch double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting 230 volts etc complete all as directed. Make - Legrand or equivalent in siemens/GE.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note - Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed by Engineer-in-Charge

Taking down old U/S tube light fittings single / Twin ,Recessis mount fitting , etc and making good the distrubed surface matching with existing surface all as per directed by engineer in charge.

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete for One light/fan/bell point controlled by one 5A switch complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

One light point controlled by one 5A switch

One fan point controlled by one 5A switch

One Bell point controlled by one bell push

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

M&L for point wiring (Work station for computer)complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete necessary electric connection for each workstation point comprising of 03 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/ Plaza

S & F in replacement of Bell push, 5/6 Amps, 240 volts SP complete all as directed.

S & F modular switch 1 way 6A all as specified and directed by EIC.

S & F modular switch 1 way 16A all as specified and directed by EIC.

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed by EIC.

S & F modular socket, 16A - 2/3 pin combined 2 modules all as specified and directed by EIC.

S & F in replacement of fan regulator electronic step type socket size and making all necessary connections complete all as directed.

S & F in replacement of bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.

S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 teRunning Metreinal, 240 volts, 5 Amps complete all as directed.

S & F in replacement of lamp holder PVC/polycarbonate insulated body type complete all as directed.

S &F 20 Watt 4 FT, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. Make-C & S CAT LTTB4F20WLED/W ,OR Equivalent to Philips/ Havells/