Press NIT No. 10 (20-21) Item No. 1

Supply of Horizontal split casing pump make suitable for clear water having 40 mtr. Head, discharge 270 m3/hr. C.I. impeller, S.S. Shaft & sleeve, 1450 RPM suction/delivery size : 200mm X 150mm minimum efficiency of the pump shall be 80%, the pump coupled by tyre coupling with 60HP squirrel cage induction motor, 3 phase, TEFC IE2 415 Volts, AC supply,, 1500 RPM, mounted on M.S. base frame and coupling guard. Make: Kirloskar/ M&P/ Beacon/DJB approved.

Supply of Vacuum Pump size 40x40 mm for charging of Pump coupled with 5 HP, AC,3 phase,1450 RPM, TEFC motor mounted on a common base frame DV-40 model. Make: -KBL/Crompton/M&P/DJB Approved make.

Providing and laying in position reinforced cement concrete 1:2:4 (1Cement: 2 Coarse: 4 graded stone aggregate 20 mm nominal size) in foundation of pump.

LT Distribution panel sheet steel enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipment of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminum. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a ferule crimped to the wire, size 1600MM x1500x375mm. Having following components of approved make. 1. MCCB 415V, TP 3phase High breaking capacity 50KA 50Hz,400 Amp with thermal and magnetic release. Make L&T/Siemens…….01 No. 2. MCCB 415V, TP 3phase High breaking capacity 50KA 50Hz, 125Amp with thermal and magnetic release. Make L&T/Siemens…….02 Nos. 3. MCB Single pole, ‘C’ curve,6Amp. Make L&T/Havells…….11 Nos. 4. MCB Triple pole, ‘C’ curve, 63Amp. Make L&T/Havells……01 No. 5. MCB Triple pole, ‘C’ curve, 32Amp. Make L&T/Havells……01 No. 6. PVC insulated copper flexible cable single core 35sqmm Make: Havells….10mtr. 7. Power capacitors, cylindrical,415V, 20Kvar Make: Epcos…….20kVAr X 2 Nos. 8. Over load relay 66-110, MN 5. Make: L&T/Siemens….02 Nos. 9. Over load relay 6-10, MN 2. Make: L&T/Siemens……02 Nos. 10. Digital Amp. Meter, 3Phase. Make AE/L&T……05 Nos. 11. Digital Volt Meter, 0-500V, 3Phase -Make AE/L&T….01 No. 12. Compact Motor protection Relay MM10. Make: L&T/Siemens….02 Nos. 13. Power contactor 220V 3phase, MNX type,95Amp. Make L&T/Siemens…04 Nos. 14. Power contactor 220V 3phase, MNX type, 70Amp. Make L&T/Siemens…02 Nos. 15. Power contactor 220V 3phase, MNX type, 25Amp. Make L&T/Siemens…02 Nos. 16. Star delta timer on delay. Make: L&T/Siemens….......02 Nos. 17. Indicating lights LED type RYB & On/OFF. Make: L&T /Havells……11 Nos. 18. Current Transformer250/5 ,100/5,30/5. Make AE /Advance….15 Nos. 19. On load change over switch 200Amp. Open execution type. Make: L&T….01 No. 20. Fitting of the above components in panel enclosure with terminal blocks, channels, ferrules, thimble, support insulator on bus bar, required hardware’s complete in all respect with testing & commissioning of panel, as per required parameters with relevant IS. testing of the panel prior to switching on as follow i. Continuity and earth testing ii. Meggaring of all equipment’s for phase to phase, neutral to body, neutral to earth and phase to earth. iii. checking for all tightness of nut and bolts iv. Alignments of doors etc. v. Interlocking tests. All function tests

Supply of LT Power Copper cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 3 core 95 mm2 for connection panel to motor. Make: - Havells/ Grandley/ Gloster/ DJB approved make

Supply of LT Power Copper cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098(Part 1) 1988 size 3.5 core 95 mm2 for connection new panel to old panel Make: - Havells/ Grandley/ Gloster/ DJB approved make

Supply of LT Power aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 2 core 10 mm2 for external, internal lightening system and fans etc. Make: - Grandley/ Gloster/ DJB approved make

Supply of CIDF swing type Non return valve as per IS 5312 (Part 1&2), PN 1.0, size 150 mm. Make: - Kirloskar/IVC

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 150 mm Make: - Kirloskar/IVC

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 200 mm Make: - Kirloskar/IVC

Supply of CI foot valve, PN 2.0 as per IS 4038 flanged type size 200 mm. Make: - Kirloskar/IVC

Supply of MS pipe 200 mm dia, welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet. DSR (E&M) 2018 Item no. 3005

Supply of MS pipe 150 mm dia, ‘C’ class as per IS: 1239. DSR (E&M) 2018 Item no. 3006

Supply of 200mm dia. MS long bend. ISI mark. (Heavy Duty)

Supply of 150mm dia. MS long bend. ISI mark. (Heavy Duty)

Supply of MS flange of 200mm. ISI Mark. (Heavy Duty)

Supply of MS flange of 150mm. ISI Mark. (Heavy Duty)

Supply of Nut- Bolt with washer of good quality

20W LED fixture with LED lamp, basic all-purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver Make: - Bajaj/Havells/ Phillips/Any DJB approved make

Supply of 45W L.E.D Light energy saving & environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E. D as light source. Make: -Havells/ Bajaj/Crompton/ Phillips/ Any approved make by DJB

Supply of heavy-duty exhaust fan having size 450 mm (18’), 900 R.P.M. in grey colour of single phase 230 volts. Make: - Almonard /Havells/Any DJB Approved make

Supply of ceiling fan of 1200mm sweep area of brown colour. Make: - Orient/ Havells/ Any DJB approved make.

Supply of pole mounted cable junction box of size (240X130X95) mm having IP 65 protection with complete accessories as per site requirement. Make: - Sintex/ Hensel

Supply of electrical insulated mats of dielectric strength up to 65KV of size (1mX2mX3mm) confirming to IS 15652. Make: -Jyoti/National

Supply of capacity 3.0T chain pulley block with 3 Mtr lift. Make Indef/Reva /Wester/DJB approved make

Supply Co2 Type Fire Extinguisher capacity 4.5 Kgs completes in all respect. Make: - Life Guard/Omex/ ISI mark.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. of group C. DSR(E&M)2018 Item no 1.8.3

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit as required. Size3x4 Sq mm. DSR(E&M)2018 Item 1.17.21

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR(E&M)2018 Item no 1.5

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR(E&M) 2018 Item no 1.6

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. DSR (E&M) 2018 Item no. 1.30

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR (E&M) 2018 Item no. 1.25

Supplying and fixing brass batten/ angle holder including connection etc. as required. DSR (E&M) 2018 Item no. 1.34

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required DSR(E&M)2018 Item no. 1.41

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR (E&M) 2018 Item no. 1.45

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. up to 450 mm sweep. DSR (E&M) 2018 Item no. 1.50.1.

Supplying and making end termination with brass compression gland and aluminium lugs for 3x95Sq.mm(38mm) cable size of PVC insulated and PVC sheathed/XLPE aluminum conductor cable of 1.1KV grade as required. DSR(E&M)2018 Item no. 9.1.13.

Supplying and fixing 5/6 amps switch piano type switch/ socket on the existing switch box/ cover including connections etc. as required. DSR (E&M) 2018 Item no. 1.23.1.

Supplying and fixing15/16-amp switch piano type switch/ socket on the existing switch box/ cover including connections etc. as required. DSR (E&M) 2018 Item no. 1.23.3.

Supplying and fixing of 6-way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). DSR (E&M) 2018 Item no. 2.3.1.

Supplying and fixing of 63 Amp, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR (E&M) 2018 Item no. 2.12.2

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7-metre-long etc. with charcoal/ coke and salt as required. DSR (E&M) 2018 Item no. 5.4

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. DSR (E&M) 2018 Item no. 5.11.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. DSR (E&M) 2018 Item no. 5.15

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe(medium class) bracket for mounting of fluorescent / HPMV /HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR (E&M) 2018 Item no. 12.34.

Supplying and fixing 5 amps to 32 amps rating, single pole 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR (E&M) 2018 Item no. 2.10.1

Supply of 50 mm dia. GI pipe medium class for dewatering/Vacuum set and cable protection. DSR (E&M) 2018 Item no. 2832

Installation, erecting, testing, and commissioning of the above said equipment’s/ accessories with all sundry equipment’s, fittings, assemblies, accessories, hardware items, bolts, supports, termination lugs for electrical connections, cable glands, junction boxes, and other items for proper assembly and installation of the various equipment’s and components of the work shall be deemed to have been included. The work also includes necessary required items for completion of work i.e. flanges, MS bends, MS Paddle Pipe, eccentric tapers, rubber gaskets, foundation bolts, construction of thrust block, necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement, loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions.