M/o Water Supply (Two Years Annual Repairing of Bowl Assly. and Tube Shaft Set of Network-74, 78, 112, 113, 115, 118 and Village-Sorkha) Noida.

40 HP Pump S/F Line Shaft 3.0 m x 25 mm. (NSI-4.1.05)

S/F Line Shaft 1.5 m x 25 mm. (NSI-4.1.06)

S/F Top Shaft 2.20m. Long 25mm with chuck nut. (NSI-4.1.07)

S/F Oil Tube heavy 'C' class 1.5 m x 40 mm (NSI-4.1.08)

S/F Top Tube 40mm. Size (NSI-4.1.09)

S/F Line Shaft Bearing 40mm x 25mm (NSI-4.1.10)

S/F Rubber Spider 150 x 40mm (NSI-4.1.11)

S/F Rubber Spider 100x40mm. (NSI-4.3.33)

S/F Line Shaft Coupling 25 mm (NSI-4.1.14)

S/F Oil Nut G.M. (NSI-4.1.12)

S/F T.T. Nut G.M. (NSI-4.1.13)

S/F Rubber Packing 150 mm. Dia. (NSI-4.1.16)

S/F Rubber Packing 100 mm. Dia. (NSI-4.3.34)

S/F Nut & Bolts 2.5''x4''' (NSI-4.1.15)

S/F Discharge head size 150mm x 150mm with T.T. Plate suitable for 40 H.P. Motor (NSI-4.1.01)

S/F Head Flange 150 mm dia. (NSI-4.1.04)

S/F Head Flange150x100 mm dia. (NSI-4.3.35)

S/F Oil Lubrication Tank with bracket. (NSI-4.1.02)

S/F Side Feed Valve with screwed C.I. (NSI-4.1.03)

S/F Column Pipe heavy 'C' class 3.0 m.x150mm. Dia 7.1 mm thickness with welded flange & suitable ribs at both ends male & female. (NSI-4.1.17)

S/F Column Pipe heavy 'C' class 1.50 m.x150mm. Dia 7.1 mm thickness with welded flange & suitable ribs at one end socket at other end. (NSI-4.1.18)

S/F Column Pipe heavy 'C' class 3.0 m.x100mm. Dia heavy 'C' Class with M. S. Flange at both ends dully welded with four nos. ribs. (NSI-4.3.31)

S/F Column Pipe heavy 'C' class 1.50 m.x100mm. Dia heavy 'C' Class with M. S. Flange at both ends dully welded with four nos. ribs. (NSI-4.3.32)

S/F Centrifugal VT Pump Bowl Assly 10 stage for 1000 LPH discharge at 45 mtr. Head of 100mmx40mmx25mm size. (NSI-4.3.30)

S/F V.T. Pump Bowl Assembly 6 stages having Bronze impellers and SS Shaft of 150x25 mm Suitable for 1600 LPM discharge at 80m. head oil lubricated type as per ISS 1710. (NSI-4.2.15)

S/F Neck Ring GM (NSI-4.2.01)

S/F Bowl Bush GM (NSI-4.2.02)

S/F Suction & Discharge Bush (NSI-4.2.03)

S/F Discharge Case Screw Bush (NSI-4.2.04)

S/F Lock Collect MS (NSI-4.2.05)

S/F Tubing adoter with bush (NSI-4.2.06)

S/F Impeller C.I. (NSI-4.2.08)

S/F Pump Shaft S.S. (NSI-4.2.07)

S/F Inter Bowl (NSI-4.2.09)

S/F Suction Bowl (NSI-4.2.10)

S/F Discharge Bowl (NSI-4.2.11)

S/F Nut & Bolt (Bowl Stud) (NSI-4.2.12)

M/c Inter Bowl (NSI-4.2.13)

M/c Impeller (NSI-4.2.14)

100 HP Pump

S/F Line Shaft 1.5 m x 38 mm. (NSI-4.3.10)

S/F SS Sleeves (NSI-4.3.11)

S/F Line Shaft Coupling 38 mm (NSI-4.3.12)

S/F Top Shaft SS with Chuck Nut (NSI-4.3.13)

S/F Spider 250x 38 mm (NSI-4.3.14)

S/F Pump Shaft SS (NSI-4.3.15)

S/F Spider Bush (NSI-4.3.16)

S/F Stuffing Box (NSI-4.3.17)

S/F Rubber Packing 250 mm dia (NSI-4.3.18)

Providing Discharge Head size 250 x 250 mm with TT Plate (NSI-4.3.27)

S/F Neck Ring G.M. (NSI-4.3.01)

S/F Bowl bush G.M. (NSI-4.3.02)

S/F Discharge Case Screw Bush (NSI-4.3.03)

S/F Lock Collect M.S. (NSI-4.3.04)

S/F G M. Gland (NSI-4.3.05)

S/F Stuffing Box Bush (NSI-4.3.06)

S/F Neck Ring on Impeller (NSI-4.3.07)

M/c Inter Bowl (NSI-4.3.19)

M/c Impeller (NSI-4.3.20)

S/F Nut & Bolt (NSI-4.3.21)

S/F Sand Guard (NSI-4.3.22)

S/F Inter Bowl (100 HP) (NSI-4.3.23)

S/F Impeller (100 HP) (NSI-4.3.24)

S/F Suction & Discharge Bush (NSI-4.3.25)

S/F Column Pipe heavy 'C' class 1.50 m x 250mm Dia thickness 7.1 mm with welded flanged and suitable ribs at both ends male & female. (NSI-4.3.29)

P/F 150 mm. dia Sluice Valve shall generally conform to IS 14846 with latest amendment, with length over flanged as per PD of IS 14846 corresponding to BS EN-558/ISO 5752 Basic series 3 in CI construction having metal seating (IS 318 Gr. LTB 2). With comple component & material of construction following below:-

1 - Body/Door/Dome-Cast Iron IS 210 Gr. FC 260 2 - Spindle-Non rising: Stainless Steel AISI 410 3 - Body seat/Door face-Gun metal : IS 318 Gr. LTB 2 (rings to be press fitted and riveted: no screws allowed) 4 - Rivets-Soft annealed brass 5 - Spindle Nut-Gun metal : IS 318 Gr. LTB 2 6 - Stem Seal-Greased Hemp 7 - Fasteners-Carbon steel 8 - Flange Drilling - IS 1538 Table 4 & 6 9 - PN 1.0 10 - Accessories (400 mm and above)-Ball thrust bearings to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug

11 - Painting/Coating - Inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) 12 - Hydro-test-(Open Ended only) (Seat : 10/16 Kg/cm2; Body: 15/24 Kg/cm2 13 - Upto 600mm dia Mannual Operated & above 600mm Gear box (Make-IVC/Kirloskar) (NSI-1.19)

P/F 150mm dia Reflex Valve shall conform to IS 5312 Part-1 & above to IS 5312 Part-2 with latest amendment, Valves shall be in graded CI with metal to metal (IS 318 Gr. LTB 2) seating, preferably slanted (and not perpendicular) vis-a-vis horizontal axis; SS AISI 410 stub pins & slant seat design. with comple component & material of construction following below:-

1 - Body/Door/Dome-Cast Iron IS 210 Gr. FC 260 2 - Hinge pin (single door)/Stub pin (multidoor type)-SS AISI 410 3 - Seat & Face rings-Gun metal : IS 318 Gr. LTB 2 4 - Rivets-Soft annealed brass 5 - Fasteners-Carbon steel 6 - Flange Drilling-IS 1538 Table 4 & 6 7 - PN 1.0 8 - By-pass arrangement-Optional 9 - Painting/Coating-Inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) 10 - Hydro-test Seat : Seat : 10/16 Kg/cm2, Body: 15/24 Kg/cm2 Make-IVC/Kirloskar) (NSI-1.10.02)

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 27/SM(JAL)-I/ET/2025-26

Not Provided

Name of Tenderer

TOTAL NIT COST OF PROJECT (In Rs.) (In lacs)

Minimum Value

SOLVENCY (Issued within a period of maximum six months).

EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited

NOT QUALIFIED

NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender

NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender

RESULT OF EXPERIENCE

TURNOVER (During the immediate LAST 3 consecutive financial years)

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive financial years.

Required Technical Staff

Required Machinary

Character certificate of Individual/Partners/directors issued from District Magistrate.

Affidavit of Not blacklisted.

Address Proof/ Id.Proof of Individual/partners/directors.

GST Registration certifcate.

Filled in form Capability Statement..

Self declaration affidavit on Rs. 100/- Notarised Stamp paper

Latest ITR

Affidavit of stating No Blood relative in Noida Authority (Regular / Contract)

Certified Copies of relevant pages of following documents:

Note :- If Tender value is Ten lacs & below Ten lacs then above condition no.-1, 2 & 3 will not applicable.

RESULT