Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹26.8 LAccepted-AOC 88 197 B CHAMAN GANJ KANPUR 208001 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208001 | L2 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹33.8 LRejected-Finance 6 18 GANGA GHAT UNNAO UP PIN 209861 | UNNAO | UNNAO | UTTAR PRADESH | 209861 | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹34.3 LRejected-Finance | L3 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Srinath P L
GE I Kanpur Cariappa Road Cantt Kanpur 208004
JOINERY OTHER BR WORKS IN MD ACCN AND OTM LOCATED AT HARDING ROAD,NAPIER ROAD SUPPLY DEPOT ETC OF AGE BR I. UNDER GE(I) KANPUR.
2022_MES_553374_1
GE(I)/KAN/T-62 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KANPUR
AS PER TENDER DCOUMENT
7 documents required · 7 mandatory
₹500
GE I KANPUR
₹80,000
Yes
3 Dec 2022
21 Sept 2022
24 Oct 2022
21 Sept 2022
17 Oct 2022
3 Oct 2022
Amount
Taking down chowkats without taking off shutter from chowkats area n.exc 1.5 Sqm each complete all as specified.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.
Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each complete all as specified.
Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each and re-fixing in the same opening complete all as specified.
M&L 2nd class HW as in plain , solid, straight chowkhats and frames , wrought , framed , rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified
S & F hold fast of flat iron 25 x 3 mm and complete all as specified and directed.
S&F 100 x 50mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and as directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item. Make : ENCHON (Kumar Arch Tech Pvt Ltd) / FLORESTA / ARCHIDPLY or equivalent as approved by GE (I).
S&F 125 x 63mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and as directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item. Make : ENCHON (Kumar Arch Tech Pvt Ltd) / FLORESTA / ARCHIDPLY or equivalent as approved by GE (I).
S&F 30 mm thick factory made WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) Make : ENCHON (Kumar Arch Tech Pvt Ltd) / FLORESTA / ARCHIDPLY or equivalent as approved by GE (I).
S&F factory made wire gauged solid PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be wire gauzed in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmely. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item.
S & F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including providing stainless steel wire cloth, 4mm thick plain glass panes, necessary hold fast & MS grills for safety purpose be provided complete all as specified and complete all as specified and directed. Note: 1. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 2. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm plain sheet glass panes, necessary hold fast shall be deemed to be included in this item. 3. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items.
M&L for factory made uPVC white colour ventilator. Horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with MS pipe stiffener (19x19x0.8mm thk) vertical frame member with help of required size CSK screw and adhesive. Total unit is fixed with help of bracket/fasteners including 4 mm thick frosted glass, MS grills and SS Jalli as per requirement. 1. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm frosted/pin headed sheet glass panes & necessary hold fast shall be deemed to be included in this item. 2. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube incl suitable metal stifner and fixed with 100 x 8 sheet metal CSK screws complete all specified .
M & L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete as per specification & drawing. Make : Rajshri Plastiwood/Sintex as approved by GE(I).
S & F PVC but hinges 100mm size Make Prayag and equivalent and complete all as specified and directed.
S & F PVC handle 150mm size Make Prayag and equivalent and complete all as specified and directed.
S & F PVC tower bolt 150mm size Make Prayag and equivalent and complete all as specified and directed.
S &F 30mm thick glazed and skeleton shutter of 2nd class hard (Hollock) prepared to receive gauge/glass (without sash bars ) fixed with mitred beeds and securing glass gauge etc sizes of members of shutter as specified in SSR part-1 section-8 ,clause 8.24(a) complete all as specified.
S & F 30 mm thick factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 and as directed by Engineer in Charge. Note : M&L for 4mm plain sheet glass panes shall be deemed to be included in this item.
S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 and as directed by Engineer in Charge. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item.
S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 and as directed by Engineer in Charge. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm & 4mm thick frosted/pin headed glass panes as per requiremet shall be deemed to be included in this item.
M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
M&L for 4mm thick plain sheet glass ordinary quality and fixed with oil putty in square n.exc 0.5 Sqm in each pane of steel windows complete all as specified.
All as per item No. (25) here-in-before but frosted glass / pin headed glass complete all as specified.
S& F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and as directed .
S& F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and as directed .
M&L for framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, cooler stands etc conforming to Fe-290 Gde-E-165 complete all as specified..
S & F 100mm size mild steel, butt hinges, medium weight, cold rolled and fixed with mild steel screws and complete all as specified and directed.
S & F 100mm size stainless steel, butt hinges, medium weight, and fixed with ss screws and complete all as specified and directed.
S&F 150mm long barrel tower bolt of aluminium extruded section complete all as specified and directed.
S&F 150mm long handle of aluminium extruded section fabricated anodized type complete all as specified directed.
S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section & fixing bolts and sliding bolts of extruded section complete all as specified and directed.
S&F 150mm floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.
S&F in repairs 300mm mild steel, ordinary rat -tail rod pattern spring including roller and roller plate complete and all as specified and directed
S&F in repairs fency type stainless steel curtain rods of 25 mm dia for doors/ windows etc including SS brackets and SS funnels/dome complete all as specified and as directed.
Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height including fittings/grids etc complete all as specified and directed.
M & L for powder coated GI grid frame work for false ceiling of size 605x605mm, the snap grid shall be of main & cross tee of size 36.5x25x1.4mm (weighing 0.24 Kg/RM) and angle of size 23.5x26.4x1.4mm (weighing 0.191 Kg/RM) fixed to wall with rawl plug and stainless steel screw 50mm 450mm c/c and tied with and incl 4mm dia suspension wire MS @ 1200mm C/C all as specified and directed
M & L for providing Gypsum Board 12mm thick, 600 x 600 mm in size, fixed or laid/ inserted to timber/GI/Aluminium frame work as in ceiling, fixed with screw as per manufacturers instructions including two coats of OBD over a coat of primer complete all as specified and as directed.
All as per item No. (40) here-in-before including taking down ceiling board complete all as specified and as directed.
Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all as specified.
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.
All as per item No. (43) here in before but except bricks.
Demolition of unreinforcement cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copings, filling for fixing of hold fast etc including necessary formwork etc.
Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc.complete all as specified.
M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair / unfair faces of brick work or concrete surfaces of walls, finished fair and even (upto two storey of building) complete all as specified.
M & L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall finished fair and even complete all as specified.
M & L for 6mm thick non asbestos fiber cement building boards fixed to walls with rawl plug not less than 75mm long and steel screws complete including taking down all as specified.
M&L for preparation of new plastered surfaces and applying three coats of white wash as on ceiling surfaces complete all as specified.
M&L for preparation of new plastered surfaces and applying three coats of white wash as on wall surfaces complete all as specified and directed
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall over a coat of primer complete all as specified and directed.
M&L for preparation of old plastered surfaces and applying one coat of white wash as on wall including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified.
All as per Item No (57) here-in-before but as on ceiling and complete all as specified and directed.
M&L for preparation of old plastered surfaces and applying one coat of cement based paint of approved shade on plastered surfaces or unplastered surface of wall including brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified.
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall over a coat of primer complete all as specified and directed.
M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified.
All as per Item No (61) here-in-before but two coat of synthetic enamel paint and complete all as specified and directed.
M&L for preparation of old steel surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified.
Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed
M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified. (Note : Debris obtained from dismantling will be dispossed off as directed)
M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
All as per Item No (67) here-in- before but as in skirting over 10 mm thick rendering in CM (1:4) all as specified and as directed.
M & L for vitrified coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, polished as in floors laid over 15mm thick screed or screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as specified.
All as per Item No (69) here-in- before but as in skirting over 10 mm thick rendering in CM (1:4) all as specified and as directed.
M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar. (Note : Debris obtained from demolition will be dispossed off as directed)
Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces all as specified and as directed.
Dismantling of boarding, any descripsion, fixed in any position with nails all as specified and directed
M & L 19mm thick coloured MDF board prelaminated both side as in kitchen cabinet including side lipping etc and complete all as specified and directed.
All as per Item No (75) but in shelf and partition etc and complete all as specified and directed.
M & L 100mm size stainless steel hinges auto close type complete all as specified.
M & L 125mm size stainless steel handles complete all as specified.
M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store .
S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified
S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified.
M&L for providing 25mm thick (measured solid), precast cement concrete louvres and jallies in type type B0 (1:2:4) (12.5mm graded aggregate) jointed in CM 1:4 including all mouldings, necessary precast frame if required at site and taking down of old jallies and removing the same from the site complete all as specified and directed.
M&L for preparation of old steel surfaces and applying two coats of synthetic enamel paint for Y Shape etc MS angle frame fixed over boundary wall/parapet wall (Straining/supported to barbed wire) (Y-Shape MS angle frame area exceeding 0.15 Sqm but not exceeding 0.30 Sqm each) complete all as specified. Note:- 1. Height of Y-Shape MS angle frame from 2.00m to 3.50m.
Dismantling old servicable / unservicable barbed wire complete all as specified and as directed.
S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Fixing only old serviceable barbed wire complete all as directed.
Restraining and resecuring old barbed wire including making good staple etc.complete all as directed.
M&L Plain Cement Concrete Type B1 (1:2:4) (using 20 mm graded stone aggregate) in foundations, filling and mass concrete.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F MS angle iron 50 X 50 X 6mm as in fencing post or strut incl cutting tops to shape as directed,drilling holes,notching for wire etc. conforming to Fe 410-0 complete all as directed.
M/S KALI CHARAN PANDEY AND CO.
M/s DKS Engineering Works
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .