GEJM-36/2024-25

Amount

Note:- 1.Please refer Appx 'D' of particular specification for the list of makes of BOQ items. 2. Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.

Taking down shutters of any description n.exc 1.00 Sqm each and removing from the site all as specified & directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 Sqm & n.exc 4 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.

S&F pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as Specified.

S&F pressed steel frames of size 105mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as Specified. M

Supply and fixing Factory made, plain framed, panelled shutter (two Panel) 35mm thick, 2nd class Hardwood with lock rail and panel of 9 mm B.W.P commercial ply. The size of rail and stiles as per as per IS:1003 (Part-I),kiln seasoned and chemically pressure treated complete all as directed by Engr-in-Charge.

Supply and fixing 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified

S&F Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note :- Sampel approved by Engr-in-Charge or GE.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid PVC Moulded door shutter.28 to 30 mm thick (Stiles) with particle board core with 2, 4 ,or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm Prelam PVC sheet on back face, to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the framme at site as per specification and drawing, complete all as specified and as directed by Engr-in-Charge.

Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.

M&L 18 mm thick PVC board one side UV printed designing and back side plain colour printed for cub board boxes or kitchen cabinet with shelf, drawer, shutter and frame full size fitted under cooking platform and other platform including fittings etc complete all as specified and directed.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.

S&F 100mm size Stainless steel handle complete all as specified and as directed.

S&F continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

Supply and fixing for stainless steel Butt hinges, 100mm , complete all as specified and as directed

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, fabricated type, anodised Size-125mm, anodised section and fixed complete all as specified. (ISI Marked)

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Supply and fixing mild steel helical ordinary rat tail rod pattern springs 150mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)

M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete.

Anodised aluminium grills, 4 mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified.

Taking down partision wall including any type of aluminium door, windows and partion in any position complete all as specified and as directed by Engr-in-charge.

S&F Aluminum Powder coated door frame of hollow section 63.5mm x 38.1 mm thickness not less than 1.53 mm fixed type Partition with glazing clips rubber gasket/rubber beading and srews for fixing of glass/ACP inserts complete all as directed by Engr-in-charge and as approved by GE . Note :- Glass/ACP sheet inserts shall be measured and paid separately under respective items.

S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of 700mm in width and of weightnot more than 35kg and fixed.

Supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

S&F in repair Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 100 mm including complete accessories complete all as specified.

Supply and fixing 4.8 mm thick sheet glass ordinary quality coloured/tinted and glazed in squares, n.exceeding 0.5 Sqm in each pane.

Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified fixed with stainless steel wire staples.

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified fixed with stainless steel wire staples.

S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available all as per directed and specified.

Supply and fixing in repair wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, complete all as specified.

S&F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) complete all as specified.

S&F in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified.

S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified.

S&F in repair Sink Cock with swinging casted spout with aerator.

S&F in repair Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-069) complete all as specified.

S&F in repair CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified.

S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified.

S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

Supply and fixing in repair florentine surgical purpose elbow action pillar cock with extended lever handle cast copper alloy, chromium plated, complete all as specified.

Supply and fixing in repair single lever florentine surgical purpose elbow action sink mixer (wall mounted) with extended operating lever, connecting legs and wall flanges cast copper alloy, chromium plated, complete all as specified.

Supply and fixing in repair single lever florentine surgical purpose elbow action bib cock with extended lever handle and wall flange cast copper alloy, chromium plated, complete all as specified.

Supply and fixing in repair Grab bar wall mounted of size 300 mm long specially designed for Disabled or Ortho patients fixed to wall or any other position chromium plated complete all as specified

Supply and fixing in repair CP health faucet (hand shower) with 1 meter long easy flexible tube in chrome finish with wall Hook (Holder) complete all as directed by GE/Engineer-in-charge .

S&F in repair CP Urinal Spreader complete all as specified.

S&F in repair Chromium plated, single towel rail 600mm long complete all as specified.

S&F in repair stainless steel Soap dish complete all as specified.

S&F in repair Glass shelf 450mm long, complete all as specified.

S&F in repair Corner Glass Shelf 3 tray (with Bracket) as per directed by Engr-in-charge.

S&F in repair waste coupling of chromium plated brass 32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin all as specified .

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

S&F in repair Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including shower arm 240 mm long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange complete.

S&F in repair Urinal (CAPRIANA in white colour, ) half stall with complete accessories Set, CP Waste Coupling, PVC waste pipe, sprader etc. Size: 375 x 390 x 590 mm complete all as specified.

S&F in repair under basin white colour with fixing accessories set, size: 560 x 470, Oval shape, including CP Waste Coupling and PVC waste pipe complete all as specified.

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge..

S&F in repair full pedestal for WHB complete all as specified.

S&F in repair Corner Wall Hung Basin with Fixing Accessories Set, Size : 400 x 400 including CP Waste coupling and PVC waste pipe complete all as specified.

S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,complete all as directed.

S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition)

Supply and fixing in repair PVC Waste pipe 32mm bore of required length complete for WHB.

Supply and fixing in repair PVC Waste pipe 40 to 50 mm bore of required length complete for Urinal.

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 20mm-210 gms).

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 25 to 50 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 25mm-455 gms).

S&F in repair PVC tank covers required for 500 ltr to 1000 ltr PVC water tanks complete all as specified and fixed

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel tubing of 25 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge

Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing tubes 'medium grade' galvanised, 25 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing fittings for steel tubing galvanised, 15 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed

Supply and fixing fittings for steel tubing galvanised, 20 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed

Supply and fixing 15 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge.

Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge.

M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls.

S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.

Supply and fixing in repair UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center ,complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center ,complete all as specified and as directed by Engineer-in-charge

Supply and fixing in repair UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed.

Supply and fixing in repair UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed.

Supply and fixing in repair UPVC branch piece, double (double 'Y') with access door for 75 mm bore complete all as specified and directed.

Supply and fixing in repair UPVC branch piece, double (double 'Y') with access door for 110 mm bore complete all as specified and directed.

Supply and fixing in repair UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F in repair UPVC (SWR) , reducers 110 mm dia complete all as specified.

S&F in repair UPVC (SWR) vent cowl 75 mm dia complete all as specified.

Supply and fixing in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F UPVC (SWR) multi floor trap with grating including jointing with solvent cement (75mm diameater for outlet in mm) complete all as specified.

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

Rendering 15mm thck in CM 1:3 or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)

M&L applying a coat of bituminous primer conforming to IS-3384 on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 85/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface.

M&L Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunkan ( Up to 4th floor) filling and mass concrete complete all as specified and directed by Emgr-in-charge.

M&L 40 mm dia G I tubing medium grade galvanised laid over floors as a spout pipe in sunken floors all as specified.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per sq. metre, removing serviceable tiles to store and rubbish off the Cantt area complete all as directed

Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified.

Material and labour glazed ceramic coloured tiles in vertical surface 200x300x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified.

Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4.

Description all as item No 119 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.

Material and labour Double charged Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4.

Description all as item No 121 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.

Machine cut kota stone slab (Minimum size shallbe 550x550 mm) flooring 18 - 20mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete,laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Machine cut kota stone 10-12 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, as in vertical surfaces complete all as specified and as directed by Engineer-in-charge.

Cutting,grinding cleaning and treating the surface of existing kota stone including rubbing and mirror polishing complete all as specified and as directed by Engineer-in-charge.

M&L in repair 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick CM 1:4 as directed by Engr-in-charge.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M&L for 50mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

Material and labour for precast cement concrete louvers and jallies, 40 mm thick (1:2:4) type B-0 (using 12.5 mm graded aggregate ) set in cement mortar 1:6, including all mouldings and dismantling old U/s broken Jallies at site, complete all as specified.

M&L for Plain cement concrete (1:4:8), type D-2 (using 40 mm graded crushed stone aggregate) nominal mix, 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.

M&L for 25 mm thick cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed.

Dismantling of ceiling board(Fibre,pulp,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets and snap grids complete all as specified and directed

Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Charge.

S&F sinks in repair with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 200mm & bowl size 410mm x 355mm x 200mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 680mm x 535mm x 225 mm bowl size 610mm x 460mm x 2225mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified. Note :- Work will be carried out upto 4th storey of bldgs also as per pirection of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.

Rendering 10mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.

Rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site including two caot snocem/Apex over a coat primer.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified.

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface including two coats of wall care putty of 1 mm thick on uneven surface as and where required.

Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over one coat of wall care putty of 1 mm thick and one coat of primer complete all as specified.

M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M&L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M&L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M&L for preparation of new decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc and applying one coat of white wash on ceiling.

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing the rubbish from the work site out side defence premises complete all as specified.

M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed.

M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed

S&F in repair, brass face/spindle for CP/Brass Bib tap, Angle/Stop cock, Pillar cock, wall mixer, WHB mixer, etc for 15 mm bore pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair, PVC syphonic kit for flushing cistern of capacity 10.0 litres,complete all as specified and as directed by Engineer-in-charge. (sample as approved & kept in GE's sample room)

Repair/ easing of wooden door any type, glazed or panelled, by trimming the side of door shutter where rubbing with chowkhat, unscrew the hinges screws and lift the door and fix with screws, tightening of wire mesh etc all as per Engr-In-Charge.

S&F in repair CPVC 20 mm female threadded elbow

S&F in repair CPVC 20 mm male threadded elbow

S&F in repair CPVC 20 mm female threadded socket

S&F in repair CPVC 20 mm male threadded socket

S&F in repair CPVC 20 mm female threadded tee.

S&F in repair CPVC 20 mm male threadded tee.

S&F in repair CPVC 20 mm union.

S&F in repair CPVC 55x20 mm reducer.

S&F in repair CPVC 55x20 mm elbow.

S&F in repair CPVC 20 mm elbow

Material and labour for (a) repairing aluminium shutters ( Door/ Window) including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings if required and making serviceable all as specified and directed by Engr-in-charge.

Taking down carefully aluminium/copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M&L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and sheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm multistranded copper conductor FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into GI/pressed steel modular terminal boxes including modular switch cover IS marked for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one, one way switch 6 Amp complete

do but one 3 pin modular socket outlet 6 amp independent board

do but one 3 pin modular socket outlet 6 amp on same board

One bell/ buzzer point controlled by one push button on same board with other switches or independent with cable 1.5 sqmm size complete all as specified and directed.

All as per srl item No 172 above but for one 3 pin modular socket outlet 15/16 Amps independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

S&F switch modular one way 06 Amp,1 module all as specified and directed.

S&F switch modular one way 16 Amp,1 module all as specified and directed.

S&F Modular socket 6A-2/3 Pin 2 module 230V AC all as specified and directed.

S&F Modular socket 6A/16A-2/3 Pin 2 module 230V AC all as specified and directed.

S&F modular bell push type one way 6 Amp 1 module all as specified and directed.

S&F modular type fan regulator 2 Module all as specified and directed.

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing lamp holder, Polycarbonate type with back plate suitable for batten fittings all as specified and as directed.

Supply and fixing LED light fitting 1 x 20 Watt, 220 V AC box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F MCB SPN complete 40-63Amp with rupturing capacity 10 KA 'C' series, Complete all as specified and directed.

Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed.

Supply and fixing round shape 12 watt 220 Volts AC recessed type with high efficiency PMMA diffuser sift glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete.

Supply and fixing round shape 15 watt 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete

S&F Distribution Board (SPN) double door 08 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar all as specified and directed.

S&F Distribution Board (SPN) double door 04 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar all as specified and directed.

S&F distribution board single door two way without bus bar complete suitable for mounting MCB all as specified and directed.

S&F sub main wiring with single core cable 2 x 4 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x4 Sq mm FRLSH insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and directed.

M/S Shesh Paul Gupta (BID ID -3086033)