REPAIR/REPLACEMENT OF SUMMER AND WINTER APPLIANCES AND OLD /UNSERVICEABLE WIRING ALONGWITH FITTING AND FIXTURES AT MD AND OTM ACCN BANA SINGH, YOGENDER VIHAR, 180 MAHIPALPUR, 35 INF BDE, 227 FD WKSP, 18 MADRAS AND 5/11 GR UNDER AGE E/M OF GE (SOUT

Amount

Attending complaints for checking the existing defective Ceiling Fan/ Exhaust Fan & Geyser including taking down of ceiling fan/exhaust fan/geyser for rewinding/major defects to be deposited in E/M store yard to repair and carrying out minor repair as required to make the item functional by checking the fault like capacitor, Holder hook, hanging nut & bolts, connection of wire, heating element, thermostate, rubber gasket, fastner bolt etc at site complete all as specified and as directed.

Notes :- This item is applicable only where no store is required. (i) Two electrician and one helper shall be provided by the contractor for attending daily complaints on working days including holidays/sunday shall report to MES complaint cell at 8:30 hrs (ii) Contractor shall ensure the security passes for his staff, to be obtained from concern authority for attending complaints. (iii) The MES Department is not responsible for the payment of electrician. (iv) The Contractor will ensure that the team of electricians with necessory tools bag shall always remain present at complaint cell to attend the complaints. (v) A recovery of Rs 500/- per person shall be recovered from the contractor for non deploying of electrician on any day. (vi) All the complaint slip & other connected document will be provided by the contractor without any extra cost. (vii) Proper record (date wise) of complaints received & rectified by the contractor of trademen shall be maintained and shall be produce for verification at the time of payment of each RAR/Bill.

M&L for Rewinding of ceiling fan 1200/1400 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush and shaft where ever required complete all as specified and as directed.

M&L for Rewinding of Exhaust Fan & Wall mounted fan upto 450 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush & shaft where ever required complete all as specified and as directed.

M&L for Rewinding and replacement of AC/DC SMPS and connected itemes of BLDC ceiling fan 1200/1400mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including repair/replacement of AC/DC SMPS where ever required complete all as specified and as directed. Notes for Srl item No. 2, 3 & 4 :- (i) Rates are inclusive of transportation to work shop and carrying out rewinding, transportation to site after rewinding & testing on installation. (ii) Ceiling fan/Exhaust Fan/Geyser will be issued from E/M store yard for rewiding and major defects.

S&F in replacement Exhaust Fan motor 300mm sweep copper winding as per existing , assembling of fan including replacement of nut , bolts and connecting cable where ever required complete all as specified and as directed.

S&F in replacement ceiling fan/ Exhaust fan Ball bearing of suitable size & model (as per sample)complete all as specified and as directed. Make:- NBC/ SKF

Supply only in replacement of fan condenser 2.5 Mfd complete all as specified and as directed. Make :- Epcos/Tibcon/Havells

Supply only in replacement of fan condenser 3.15 Mfd complete all as specified and as directed. Make :- Epcos/Tibcon/Havells

M&L for replacement of exhaust fan blades for size upto 450 mm sweep as per sample complete all as specified and as directed.

M&L for replacement of MS louvers suitable for exhaust fan of sizeupto 450 mm sweep as per sample complete all as specified and as directed.

Supply only in replacement holder hook with rubber washer suitable for size 1200/1400 mm ceiling fan as per sample complete all as specified and as directed.

S&F in replacement PVC canopy for ceiling fan of size 1200/1400 mm as per sample complete all as specified and as directed.

Descalling of geyser 25/35/50 ltrs capacity of any make, opening up complete for inspection descalling by chemical treatment of internal tank, themrostate pipe, base plate assembly including replacement of gaskets testing and refixing in position including making electrical and water connection complete all as specified and directed by Engineer-in-Charge.

Supply only in replacement heating element 1.5 KW for any make of geyser of 25/35 litres capacity as per sample complete all as specified and as directed. Make Micronking/Theeta/Standard

Supply only in replacement heating element 2 KW for any make of geyser of 50 litres capacity as per sample complete all as specified and as directed. Make Micronking/Theeta/Standard

Supply only in replacement thermostat (11 inch Long) for 25/35/50 ltrs capacity geysers complete all as specified and as directed. Make Micronking/Theeta/ Standard

Supply only in replacement indicating lamp round / flat type as required for geyser 25/35/ 50 litres capacity as per sample complete all as specified and as directed.

Supply only in replacement safety valve ISI marked for geyser 25/35/50 litres capacity as per sample complete all as specified and as directed.

Supply only in replacement safety plug for geyser 25/35/50 litres capacity as per sample complete all as specified and as directed.

Supply only in replacement PVC connection with brass nipple 15 mm x 450 mm long for hot water for geyser 25/35/50 ltrs capacity as per sample complete all as specified and as directed.

S&F in replacement base plate geyser syphon assembly set complete with inlet, outlet and thermostat, including rubber gasket for bajaj Caldia model for geyser of 25 litres capacity as per sample complete all as specified and as directed.

S&F in replacement base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket for any make of geyser of 35 litres capacity as per sample complete all as specified and as directed.

S&F in replacement base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket for any make of geyser of 50 litres capacity as per sample complete all as specified and as directed.

S&F in replacement 25 Ltr inner stainless tank suitable for 25 Ltr storage water heater complete all as specified and as directed.

S&F in replacement 50 Ltr inner stainless tank suitable for 50 Ltr storage water heater complete all as specified and as directed.

Supply only in replacement FR PVC Sheathed Round , Copper conductor (Flexible) industrial cable , 1100 Volts , conforming to IS: 694 of size 2.5 Sqmm 3 core for connecting geyser complete all as specified and as directed.

S&F in replacement Rubber gasket for Water heater storage of any capacity fixed and suitable as per the existing, complete all as specified and as directed.

S&F in replacement MS fastner bolt 8 mm dia and upto 150mm long for fixing Geyser/Exhaust Fan with nuts and washers complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, holder, bell push, fan regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through existing concealed PVC/ MS conduit and including replacement of unserviceable pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 sqmm for earthing) and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and as directed. Note :- In existing conduit wiring new conduit will be added where there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes.

All as per Srl item No. 30 above but One 3 pin socket outlet, 5/6 Amps, independent board, with cables 1.5 sq. mm size with through existing concealed PVC/MS conduit.

All as per Srl item No 30 above but 5 Amp socket outlet on same board.

All as per Srl item No 30 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing with through existing concealed PVC/MS conduit.

All as per Srl item No 30 above but for one One light point controlled by 2-way switches using cable of 1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing with through existing concealed PVC/MS conduit.

S&F switch piano flush type 5/6 Amps SP one way complete all as specified and directed.

S&F switch piano flush type 5/6 Amps SP two way complete all as specified and directed.

S&F bell push, flush type 5/6 Amps complete all as specified and directed.

S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed.

S&F switch piano type 15/16 Amps SP one way complete all as specified and directed.

S&F universal socket outlet 2-in-1 (multipurpose) 5pin 6/16 Amps flush mounted type complete all as specified and directed.

S&F 0-4 step type electronic regulators for ceiling fan 1200mm sweep, 240V complete all as specified and directed.

S&F lamp holder Angle/Batten Type bakelite insulated body with back plate suitable for batten fitting complete all as specified and directed.

S&F in replacement Stylo Wall Light ,Decorative wall mounting , Champagne gold finish fixture with plastic body suitable for Led Lamp upto 15 Watt with all connections complete all as specified and directed.

S&F in replacement of electric bell (Buzzer) any type complete with including fliexble wire in complete complete all as specified and directed.

S&F in replacement of Electric bell ding dong any type complete with including fliexble wire in complete all as specified and as directed.

S&F ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and directed.

S&F wall mounted LED Integrated batten 20Watt -4ft white , 6500K, indoor decorative PVC extruded LED batten- Integrated type in replacement of old unsv existing 36/40Watt FTL fitting any type, complete all as specified and as directed.

S&F wall mounted LED Integrated batten 10Watt -2ft white , 6500K, indoor decorative PVC extruded LED batten- Integrated type in replacement of old unsv existing 18/14 watt FTL fitting any type, complete all as specified and as directed.

S&F Surface mounting Round/ Square shaped LED downlighter 6 Watt any type complete with including new fliexble wire as required on site and including taking down of old unsv existing ceiling light fitting complete all as specified and directed.

S&F LED 10 watt white Bulk head any type complete with including new fliexble wire as required on site and including taking down of old unsv existing light fitting of any type complete all as specified and directed.

S&F in replacement of VTPN distribution board 4 way double door, vertical type for fixing MCCB up to 250 Amps as incommer and MCBs as out goings with metel door and IP 43 Protections and connecting complete all as specified and as directed. (Make :Legrand Cat No. 5077 47 or equivalent in L&T/Havells/Indoasian/ Siemens as approved)

S&F in replacement of MCCB 3 Pole 415V, 'C' series 200 Amps with breaking capacity 36 KA including providing new lugs & thimbles of required size complete all as specified and directed.

S&F in replacement of MCCB 3 Pole 415V, 'C' series 160 Amps with breaking capacity 36 KA including providing new lugs & thimbles of required size as per site requirement complete all as specified and directed.

S&F in replacement MCB TP 3 Pole from 63 Amps 415 volts, 'C' Series 10 KA as per site requirement complete as per site requirement and complete all as specified and directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-8 Way, 240V with 200 Amp rated busbar as per site requirement and complete all as specified and directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-12 Way, 240V with 200 Amp rated busbar as per site requirement and complete all as specified and directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-16 Way, 240V with 200 Amp rated busbar as per site requirement and complete all as specified and directed.

S&F in replacement of MCB SPN 63 Amps 240 volts, 'C' Series 10 KA or of any description including providing new lugs & thimbles of required size as per site requirement and complete all as specified and directed.

S&F in replacement of MCB SPN 40 Amps 240 volts, 'C' Series 10 KA or of any description including providing new lugs & thimbles of required size as per site requirement complete all as specified and directed.

S&F in replacement MCB SP 63 AMPs C curve complete all as specified and directed.

S&F in replacement MCB SP 40 AMPs C curve complete all as specified and directed.

S&F in replacement MCB SP 6 to 32 AMPs C curve complete all as specified and directed.

S&F in replacement Sheet metal encl with metal clad plug & socket and MCB SP 20Amps, 240 V complete all as specified and as directed. Make - Legrand / Havell's / C&S

M&L for earthing galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 5 of SSR Part I, including earth test point upto panel board, all as specified or indicated including testing on completion complete all as specified and directed.

S&F in replacement of building security light fitting 45W LED 5000K new Powder coated pressure die cast aluminium compact LED Street light suitable for pole dia 40 mm of bracket duly fixed with clamps, nut, bolts & washers etc complete all as specified and directed.

S&F of Recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling in replacement of existing old unserviceable CFL fitting any type from ceiling of common areas and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and as directed.

Taking down old Submain wiring any type , keeping away from site and M&L for submain wiring PVC insulated FRLS single core with stranded copper cable of size 10 Sqmm in 2 runs and 10Sqmm one run for earth drawing through existing PVC concealed conduit 25 mm dia conduit complete all as specified and directed.

Taking down old Submain wiring any type , keeping away from site and M&L for submain wiring PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing PVC concealed conduit 25 mm dia conduit complete all as specified and directed.

Taking down old Submain wiring any type , keeping away from site and M&L for submain wiring PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing PVC concealed conduit 25 mm dia conduit complete all as specified and directed. Notes for Srl item No.67 to 69:- (a) Two runs of main cable and one run of earth cable all together shall be considered as one length. (b) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

verma enterprises

M/S Malik Construction Corporation

A N BUILDERS

aggarwal engineers contractors

Microsys Controls India