SPECIAL REPAIRS TO JOINERIES AND ALLIED WORKS AT RANAPRATAP BLOCK BUILDING NO 189 AT DSSC WELLINGTON

Demolition of stone slab, floor hearth or wall tiling laid bedded and pointed in any mortar (but not backing) and removal the debris from the site to out side MD land complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) n. exceeding 1.50 Sqm complete all as specified and directed.

Taking down old unsv UPVC partition of any type or size including mongeries complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Material and labour for UPVC door with double shutters of following specifications:- .The construction profile shall be overall frame sectional size 60x 58mm with wall thickness 2.70+/- 0.2mm extruded sections.The corners shall be plastic welded.The hinge side vertical outer frame shall be reiforced with galvanised steel profileof wall using 8mm dia 80mm long MS screws minimum 3 Nos on each side.The glazing shall be fixed to door frame with UPVC standared beading s of sectional size 24.05x16mm & 2mm thick.The bottom portion of door shutter shall be providfed with UPVC board 5mm thick & 1Mtr in height and the balance shall be glazed excluding the shutter frame area.The shutter shall be fixed to frame using 3Nos of 3D hinges.The door shutter shall be provided with 8mm thick sheet glass & 5mm UPVC board with EPDM rubber gasket,one mortice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified and as directed.The cost of glass, sheet etc shall be deemed with the quoted rate.

Material and labour for Factory made UPVC white colour sliding Windows with glazing all as per manufacturer's direction and following specifications :- (i) The profile for constr of UPVC window frame shall be uPVC material conforming to 10151 . (ii) The frame shall be made of extruded uPVC section having overall diamension of 65mmx 50mm having wall thikness 2mm ± 0.2mm. (iii) The corners of wall frame shall be joint by MS galavanised brackets ,joints,mittred and plastic weleded. (iv) The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thicknesss 1mm ± 0.1mm and the tie rod shall be provided at the bottom of the frame. (v) The profiles should be sigle chamber system which shall provide high insulation properties. (vi) The window system should be glazed with 6mm thick plain glass fixed in window frame as per manufactures instruction. Note: The entire fixing shall be done with as per manufactures instruction and specification and as directed.

Supply and fix UPVC Partition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etc all as specifed and directed. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design)

M&L for UPVC fixed ventilators of approved colour with glazing all as per manufactures direction and following sections:-(1) UPVC ventilator frame shall be made of UPVC material confirming to IS-10151 .The ventilator frame shall be made of extruded UPVC section having overall dimension of 60mm x60mm having wall thickness 2 mm +/- 0.1mm.Corners of wall frame shall be jointed by MS galvanised brackets joints mitred and plastic welded.The hinge side vertical outer frame shall be reifnforced with galvanised MS tube of wall thickness 1mm +/- 0,1mm and the tie rod shall be provided at the bottom of the frame . (2) Glazing shall be provide with 5mm thick frosted glass fixed with appropriate size of beading as per manufactures complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and rough to receive the top finish of floor etc complete all as specified and directed.