Restocking, Repair and Renovation of Old Closure in Kud Block, Udhampur Range, under CAMPA FY 2026-27

FENCING (Repair and renovation) Purchase of Fencing material: (i) PCC Sq. Posts conforming to SICOP product code PCFP-3 = 1010 nos (ii) Black annealed Barbed wire conforming to SICOP product code BA-BW = 20.20 Qtls Mechanical carriage of fencing material: Sq. PCC Posts and Black annealed wire from factory to road side nearest possible road side including loading, unloading and its stacking. Head load carriage of fencing material: Sq. PCC Posts and Black annealed wire from nearest possible road side to work site of closure. Site Clearence: Involving cutting of Bushes along the proposed peripheryof closure through manual labour. Earth work: Digging of pits manually of size 1'X 1' X 1'-6" at 10' spacing along the pheriphery of fencing line. Fixation of PCC Sq. Posts. Fixing of PCC Sq. posts into the excavated pits manually including fixing of every 8th fence post along straight line and every fence post at the corner of the closure in cement concrete block of size 1'X 1' X 1'-6" in the ratio 1:3:6 (1 part cement: 3 part sand and 6 part stone aggregate). Also includes refilling of excavated soil into pits and complete ramming of soil around the PCC posts including cost and carriage of cement, sand and stone aggregate. Stretching of Black annealed wire. 4 strands along the fixed Sq. PCC posts covering manually with Black annealed wire. Painting of Sq. PCC posts. Sq. PCC posts with ready mix syhthetic Enamel paint of approved brand and manufacture in all shade to give an even shade on all sides of each fence posts manually. Fixation of sign board and Gate/Stairs in each unit Providing and fixing of iron board of MS sheet 3' X 5' of thickness 3mm (18 guage) embeded into 2 No. vertical angle iron 40mm X 40mm X 6mm (16 guage) 8' length including painting, writing, carriage upto site of closure and its fixation in cement concrete block and fixing of Gate/Stair of Iron angle as per design for crossing.Providing and fixing of iron board of MS sheet 3' X 5' of thickness 3mm (18 guage) embeded into 2 No. vertical angle iron 40mm X 40mm X 6mm (16 guage) 8' length including painting, writing, carriage upto site of closure and its fixation in cement concrete block and fixing of Gate/Stair of Iron angle as per design for crossing. in each unit

Pit Plantation:- Restocking of Planting of Poly bag raised saplings in staggered pits of size 45x45x45 cm along the contours as well as on flat surface including all lifts and carriages. The rate includes the cost of digging of pits refilling with clean surface soil, carriage of plants and raising of water harvesting structure etc.