SPECIAL REPAIR TO STORAGE ACCN IN BLDG NO P 2 AT MES POWER HOUSE IN AGE BR II UNDER GE DANAPUR CANTT

Amount

Dismantling of kota stone, floor tile & walls tiles including bedding but not backing and rubbish off permises complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over and including 20 mm thick screed bed in cement mortor (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed..

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over and including 10 mm thick rendering in cement mortor (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone (Except Kota Stone) slab as in flooring over and including 20 mm thick screed base in cement mortor (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. Note : Kota stone shall be reused retrived from item No.01

M&L for polishing only of old existing Kota stone flooring with mechanical grinder machine complete all as spd and directed.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match the tile over and including 15 mm thick screed bed in cement mortar 1.6 complete all as specified and directed. Make -Orient/Somany/Johnson/Kajaria

M&L for glazed coloured tiles (Digital pattern) including highlighter (450x300x7mm thick) in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including 10 mm thick rendering in cement mortar 1.4 surfaces complete all as specified and directed. Make -Orient/Somany/Johnson/Kajaria

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed

M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in cement mortar (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified.

Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in Unframed work complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed.

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.

S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed.

S & F of 6 mm thick asbestos cement two-piece adjustable plain wing ridge fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed.

S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets (Except Sheet) fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed. Note:- Old AC sheet shall be used retrived under item No. 12.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

S&F powder coated Gl frame work for ceiling using Main Tee and cross tee of Size 24mmx32mm having 0.27mm guage and sub cross cross tee of size 24mmx32mm having 0.25mm guage and wall angle of size 19mmx19mm having 0.35mm guage,. The mess size will be of 600mmx600mm including supply and fixing of 12mm thick Gypsum tile of zize 600mmx600mm complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work (Except Brick) with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. Note: Old brick shall be reused retrived from item No. 22

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed

All as per item No 26 above but exc 1.5 Sqm but n.exc. 4 Sqm complete all as specified and directed

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S&F anodised / powder coated aluminium grill for window ventilators (diamond shape of approx size 100 x 100 mm) made out of aluminium channel of size 4x5mm as approved by GE complete all as specified and directed.

S&F powder coated aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws etc complete all as specified and directed. Make : Jindal , Hindalco or Equivalent

S&F 4 mm thick figured sheet glass pin head type fixed in aluminium ventiliators with necessary rubber and powder coated aluminium snap beading complete all as specified. Make : Modi Float, Saint Gobin

S & F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.

M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for door etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a) complete all as specified and directed.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for window and ventilator etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b) complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar complete all as specified and directed.

M & L 25 x 3 mm flat Iron as in hold fast etc complete all as specified.

Cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for insertion of hold fast including necessary formwork etc. complete all as specified and directed.

M & L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

S & F Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2010 print) on serial page No. 161 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) complete all as specified and directed.

M & L for 75 mm thick cement concrete1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

Supply only 3 mm thick and 38 mm wide Glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in levelling course, roof padding, coping, similar items, etc complete including necessary scaffolding and demolition of existing coping complete all as specified and as directed (Note : The contractor may please be included rate of scaffolding at any height)

M&L for applying two coats of oil bound distemper over a coat of primer over and including preparing the surfaces using Birla / JK Putty @ 2 Kg / sqm, including removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coat of cement base paint on newly plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified.

M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of Oil emulsion distemper over a coat of chalk whiting complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directred

Taking up or down 15 mm bore galvanised steel tubing and connections complete all as specified and as directed

Taking up or down 20 mm bore galvanised steel tubing and connections complete all as specified and as directed

S&F 16 mm dia CPVC pipe SDR 11 & plain CPVC SDR complete fittings fixed to walls and ceilings or laid in floors with solvent etc. complete all as directed. Make : reliance/Kishan/Finolex/Tirupati

S&F 20 mm dia CPVC pipe SDR 11 & plain CPVC SDR complete fittings fixed to walls and ceilings or laid in floors with solvent etc. complete all as directed. Make : reliance/Kishan/Finolex/Tirupati

S&F 32 mm dia CPVC pipe SDR 11 & plain CPVC SDR complete fittings fixed to walls and ceilings or laid in floors with solvent etc. complete all as directed. Make : reliance/Kishan/Finolex/Tirupati

Dismantling of PVC water tanks of 500 ltrs capacity including all fittings such as nipple, float valve etc complete all as specified and directed

S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed

S&F nipple suitable for HDPE water tank (min weight 15mm-38gms) complete all as specified and directed

S&F nipple suitable for HDPE water tank (min weight 20mm-45gms) complete all as specified and directed

S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed Make : Prayag/polytuf

S & F in repair 15 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F in repair Vitreous china urinal half stall type, white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, waste pipe, PVC connection grating and union for discharge pipe complete.

S&F CP urinal spreader for fixing with 15 mm bore pipe complete all as specified and directed. Make :- Hindustan/Parryware/Equivalent make.

S&F CP waste coupling of 32 mm bore dia of discharge pipe fixed to urinal complete all as specified.

S&F in repair white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall complete, incl taking down old cistern of any description. Make : Prayag/Parryware/Cera/Commander

S & F of 110/110 mm bore PVC (SWR) 'P' trap complete all as specified and directed

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia. outlet complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand complete. Make - Cera/Jaquar/Parryware/Hindware.

S&F pillar taps cast copper alloy with capstan head chromium plated screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screw shank and fly nut screwed for iron pipe of 15 mm bore complete all as specified.

S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.

S&F steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete as specified and directed.

S&F CP grating doom 125 mm dia with waste hole of ISI marked complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 110 mm bore bends of any radius with door/without door complete all as specified and directed.

S&F PVC (SWR) 110 mm PVC junction single (Single 'T') equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S&F stack clamps for 110mm dia pipe made out of 50mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3, type 'A-1' using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete 1:1.5:3, type 'A-1' using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m sapn and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete 1:1.5:3, type 'A-1' using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includ.

M&L for rendering 15 mm thick in cement mortar 1:4 over roof slab mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

S & F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified and directed.

~Ditto~ all as per item No 98 above but size of frame is 125x60mm complete all as specified and directed.

S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S & F 150 mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm long Aluminium handles of extruded section, fabricated type and fixed complete all as specified and directed.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed.

M&L for two coats of weather coat paint over a coat of primer on new surfaces on wall including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for dura stone heavy duty coloured vitrified tiles of size 300x300x9-10 mm thick as in floor etc. exterior grade set and jointed with neat cement slurry and painted in coloured or white cement to match tile over and including 15 mm thick screed bed in cement mortar 1.6 complete all as specified.

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

M&L for dura stone heavy duty coloured vitrified tiles of size 300x300x9-10 mm thick as in dado/skirting etc. exterior grade set and jointed with neat cement slurry and painted in coloured or white cement to match tile over and including 10 mm thick rendering in cement mortar 1.4 complete all as specified.

Taking down Steel rolling shutters, of any description of area exc 10.00 sqm but n exc 20.00 sqm complete all as spd and directed.

Taking down Steel rolling shutters, with out ball bearing, as specified and refixing with repair of top cover, anchoring rod, hasp and staple of area exc 10.00 sqm but n exc 20.00 sqm complete all as spd and directed.

S&F 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with chain wheel and hand chain complete all as spd and directed.

M&L for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m

Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundn etc n. exc 10sqm on plan and n. exc 1.5m in depth complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surfaces of walls ect complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding modular steel box/plate for mounting modular switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium /AKG.

One light / fan point controlled by one switch.

One 5 Amps socket outlet point controlled by one switch on same board with other switches.

One 5 Amps socket outlet point controlled by one switch on independent board.

~Ditto~ all as per item No. 119.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing Lamp holder, insulated body with back plate suitable for batten/angular fittings complete all as specified and directed.

S&F sheet metal enclosure for 8 way distribution boards (DB's), double door, single pole and neutral with 200 Amps rated bus bar, IP-20 protection suitable for fixing MCB's/Isolators complete all as specified and directed. Make : Legrand/Schneider/Siemens.

Supply and fixing with MCB SPN 5 to 32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make : Legrand/Schneider/Siemens.

Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/Philips/Crompton.

Supply and fixing in repair LED tube rod 18 watt 230 volt T8 type made up of polycarbonate with in built electric electronic driver both sided connection with metal heat sink complete fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/Wipro/CG.

Supply and fixing in repair LED batten tube light fitting 1x 9 watt 230 volt wall/ ceiling mounted luminaire with polycarbonate hoiusing and integrated electronic driver with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make-Havells Cat No:-LUMILINEBS9WLED865SPCWH or equivalent of Bajaj/ CG / Philips.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorative bulk head fitting with driver and prewired and necessary electric connection with pvc insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and directed. Make : Havell's Cat No. HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor,drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.50 Sqmm cable with multistranded copper conductor green colour PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed.

M&L for 25 mm dia PVC conduit having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification) with all accessories for sub main wiring / telephone cable / internet cable complete all as specified and directed. Make of conduit : Plaza/Prestoplast/Modi.

M/S MODERN CONSTRUCTION

M/S Priya Trading Agency

jaglalchoudharyandsons

MS JODHI PRASAD SINGH SONS

M/S SAMRAT TRADING AGENCY

TRIBENI SINGH AND SONS

SINHA CONSTRUCTION