Reinvited for Providing and fixing cabins for consultant with aluminium partition in Burn and Plastic department in B Block of Lala Shyam Lal in University of Health Sciences Rohtak

Amount

Cost of aluminium fittings complete for doors and windows, such as tower bolts handles and etc and screws for these fittings (excluding sliding bolt) (b) For double leaf shutter (HSR 17.72(b).

Supplying and fixing hydraulic door closer, I.S.I. mark, with necessary screws, etc. complete- (HSR 17.82)

(c) I.S.I. designation No. III (size of door 851 mm to 1000 mm)

Providing and fixing sliding bolt with nuts and screws, etc complete. (a) Brass (ii) Size 250mmx16mm (HSR 17.83aii)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to I.S.733 and I.S. 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasterners including necessary filling up of gaps at junction, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/panclling C.P. brass/stainless steel screws, all complete.Fixed portion (Anodised aluminium transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)(HSR 17.95)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to I.S.733 and I.S. 1285 fixed with rawlplugs and screws or with fixing clips or with expansion hold fasterners including necessary filling up of gaps at junction, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/panclling C.P. brass/stainless steel screws, all complete.Shutters of doors , window & ventillators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required including aluminium fitting(HSR 17.96)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS :12823 grade I type II in panelling fixed in aluminium doors. Windows shutters and partition frames with C.P brass/stainless steel screws etc. complete.(HSR.17.97)

(b) Pre-laminated particle board with decorative lamination on both side.

Providing and fixing glazing in aluminium door windows, ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). (HSR.17.98) (b) With float glass panes of 5.0mm thickness.