Repair and painting work of EVM strong room in the Collectorate premises in Mahoba district

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete DSR Vol-2 Code-13.88

Wall painting with premium acrylic emulsion paint, of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. DSR Vol-2 Code-13.83.2 Two coats(iner Face)

Finishing wall with water proofing Cement paint of required shade New work (Two or more coat applied @ 3.84 ltr/10 sqm DSR Vol-2 Code-13.445.1(outer Face)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR Vol-2 Code-13.80

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR Vol-2 Code-13.62.1

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. DSR Vol-1 Code-22.6

12 mm cement plaster: DSR Vol-1 Code-13.1.1

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR Vol-1 Code-15.23.1

1:2:4 (1 Cement : 2 coarse sand (Zone-III):derived from natural sources : 4 graded stone aggregate 20 mm nominal size stone aggregate derived from natural sources) DSR Vol-1 Code-4.1.3

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore DSR Vol-1 Code-18.49.1