Repairing of CRPF Guard room, Boundary wall and civil works for Installation of Motorized Sliding Gates at Ithai Barrage Area.

Amount

Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of unserviceable materials within 50 m lead.

Demolition below G.L upto 1m depth & disposal of unserviceable materials with 50m lead. Unreinforced cement concrete upto 15 cm thickness.

Dismantling of expanded metals or IRC fabric with necessary battens and beading including frame work and stacking the serviceable materials within 50m Lead.

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.(b) Hard/Dense soil.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering. (2.1.3) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

2nd class (local 1st class) brick work in foundation and plinth in cement mortar 1:4(1 cement:4 coarse sand)

Extra brick work in superstructure above plinth level upto 1st floor level.

Providing and laying damp-proof course 40 mm thick with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 10 mm nominal size)

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mt and removal of the same for in-situ reinforced concrete and plain concrete work in. (4.1.8.2) Sides or soffits of beams, beam haunching, cantilevers, girders, bressumers and lintels not exceeding 1m in depth.

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mt and removal of the same for in-situ reinforced concrete and plain concrete work in. 4.1.7.1) column, pillar, posts, and struts (square, rectangular or polygon in plan).

Steel Reinforcement for R.C.C work including straightening, cutting, bending and placing in position and binding all complete. b) Thermo-Mechanically treated bar.

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15°landing, balconies, shelves & chajjas, lintels, bands, plain window sills, staircases and spiral staircase upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size).

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttress, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts etc upto floor Five level i/c plastering the exposed surface with cement 1:3 (1 cement: 3 fine sand) of thickness not exceeding 6mm thickness to give a smooth and even surface but excluding the cost of centering-shuttering & reinforcement. 3.2.2) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Filling in plinth with sandy soil under floors including watering ramming, consolidation and dressing complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make in all colours and shade in laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) i/c grouting the joints with white cement and matching pigments etc. complete .9.31.1 size of tile 600x600mm (single charged) 9.31.1.1 Non branded.

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make, in all colours and shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement:3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of tile 600x600mm (singled charged) Non- branded.

Providing wood works in frames of doors windows clerestory windows & other frames wrought framed & fixed in positionm7.1.3 Local best quality Leihao

Providing & fixing 35mm panelled glazed or panelled & glazed shutters for doors, windows and clerestory window i/c bright finished or black enamelled M.S. Irons butt hinges with necessary screws. (Uningthou Wood)

Providing & fixing Aluminium handles with necessary screws etc. complete. 7.92.1) 125mm

Providing & fixing Aluminium sliding bolts bright finished or black enamelled with nuts & screws etc. complete. 300x16 mm

Providing & fixing Aluminium Tower bolts (barrel type) with screws etc. complete. 7.88.1) 250x10mm

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two coats (excluding priming coat) with white paint of approved quality on new steel work or wood

Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and revited/screwed with 15x3mm lugs10 cm long with steel plugs embedded in cement concrete block 15x10x10cm of 1:3:6(1 cement:3 coarse sand :6 stone aggregate 20mm nominal size)or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4mm thick, projecting hinge, handles, peg stays, bolting device, locking arrangements, spring catch& aluminium clip beading etc as required complete. (10.70.1) Ready-made aluminium windows (fixed).

Steel work in single section i/c cutting hoisting, fixing in position & applying a priming coat of lead paint(8.1.3) In channel, angles & tees

Steel work in single section, i/c cutting, hoisting, fixing in position and applying a priming coat of red lead paint. 8.1 (8.1.2) In M.S Flat/Plate

12mm cement plaster 1:4 (1 cement: 4 coarse sand).

Neat Cement punning.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate 20mm nominal size) i.c finishing the top surface of concrete smooth.

Applying one coat of cement primer of approved quality on wall surface.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shed.

Painting on wall with (two coats) with plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded & bolted including special shape washer etc complete. 10.65.1) Electric resistant welded tube (Conforming to IS: 1611-1979).

Trapezoidal pre-painted profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the coat of purline & trusses. 10.59.2) Pre-painted Galvanised Iron sheet (PPGL) (i) Profile sheet 0.35mm / 2.8 kgs/ sqm

Trapezoidal pre-painted profile sheet for Ridges, Gutter or Valley 610 mm wide of approved brand DYNA roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the coat of purline & trusses. 10.60.2) Pre-painted Galvanised Iron sheet (PPGL) (i) Profile sheet 0.35 mm / 2.8 kgs/ sqm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 30mm long the perimeter of ceiling fixed o wall/partition with the help of rawl plugs at 452mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum plain 10.61.1. 12.5mm thick tapered edge gypsum plain board conforming to IS 2095-Part I.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering.(2.1.2) 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm normal size)

Providing and laying 60mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in -charge.

Polygonal rubble masonry/R.R. masonry (uncoursed/ brought to courses) squared rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation & plinth in cement mortar 1:6 (1 cement:6 coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 stone aggregate 20 mm nominal size) at plinth level.

Flush or ruled pointing on stone work cement mortar 1:3 (1 cement: 3 fine sand).

Demolition below G.L upto 1m depth & disposal of unserviceable materials with 50m lead. Unreinforced cement concrete upto 15 cm thickness.

Add EPF @ 3.25%

Add CESS @ 1%

Add GST @ 18%

M/S RAJKUMAR ROMESH SINGH

M/S L JAYANTAKUMAR SINGH