Construction of cement concrete Roads Under Maharashtra Suvarna Jayant Statei Nagarotthan Mahaabhiyan for Municipal Council Achalpur, District. Amravati Phase 02

Amount

Road Work Cutting down trees including trunks and branches with girths above 30cm to 60 cm and stacking the material neatly with all lifts and lead of 1000 m as directed and earth filling in the depression / pit if any.

Scarifying the existing granular road surface to a depth of 50 mm and disposal of scarified material within all lifts and leads upto 1000 metres.

Excavation for roadway in earth,soil of all sorts,sand,gravel or soft murum including dressing section to there quired grade,camber and side slopes and conveying the excavated materials with all lifts up to a lead of 50m.and spreading for embankment or stacking as directed.

Watering & compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, Numbert less than 97 % of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with vibratory roller.

Transporting the materials obtained from road cutting including all lifts, & the lead upto 1km. inclusive from the site of excavation to the site of deposition as directed.

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. Numberte :One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below450 mm dia NP3 (2m length)

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985. 450 mm Dia

Providing and laying in situ/ready mix/ready mix M10 cement concrete of trap/granite/quartzite /gneiss metal in foundation including necessary centering, formwork, bailing out water ,compacting and curing etc. complete .(withfully automatic microprocessor based PLC with SCADA enabled with reversible drum type mixer/concrete batchmix plant (panmixer) with natural (Achalpur City)

Providing and laying in situ/ready mix/ready mix M10 cement concrete of trap/granite/quartzite /gneiss metal in foundation including necessary centering, formwork, bailing out water ,compacting and curing etc. complete .(withfully automatic microprocessor based PLC with SCADA enabled with reversible drum type mixer/concrete batchmix plant (panmixer) with natural (Paratwada)

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.(Achalpur City)

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. ( Paratwada)

Providing earth work in embankment with approved materials obtained from departmental land or other sources upto all lead including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with VSat attachment to achieve Numbert less than 97 % of standard proctor density etc. complete

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.(Achalpur City)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (Paratwada City)

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 - Plant Mix Method and Grading - II Material. (Achalpur City)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 - Plant Mix Method and Grading - II Material. (Paratwada City)

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate Numbert exceeding 25 mm, , cement content Numbert to be less than 150 kg/ Cubic Metre, optimum moisture content to be determined during trial length construction, concrete strength Numbert to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. (Achalpur city)

Construction of dry lean cement concrete Subbase over a prepared subgrade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate Numbert exceeding 25 mm, cement content Numbert to be less than 150 kg/ Cubic Metre, optimum moisture content to be determined during trial length construction, concrete strength Numbert to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineerincharge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate Numbert exceeding 25 mm, , cement content Numbert to be less than 150 kg/ Cubic Metre, optimum moisture content to be determined during trial length construction, concrete strength Numbert to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. ( Paratwada City)

Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMetric Ton FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bitumiNumberus paint as directed etc. complete.

Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMetric Ton FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bitumiNumberus paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMetric Ton FE 500, chairs with proper alignment etc. complete.

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. (Achalpur City)

Providing and laying insitu M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine & coarse aggregates combined gradation as per Table 6003 of MORTH Specification 2013, mixed in a batching and mixing plant/ Numbern tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying compacting and finished in a continuous operation, finishing to lines and grades as directed by Engineerincharge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineerincharge (initial lead of 5.00 Km for raw materials up to plant site)

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. ( Paratwada City)

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS3395:1997 below concrete pavement including all materials and labour complete.

Cutting transverse contraction joints 3to4mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48hours of casting of bay/slab etc. complete including subsequent widening of the groove 8to10mm. wide at top having depth of15mm.as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS:5212-1989 into saw edgroove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam bacer rod of required diameter (appraox.25% larger than the initial 3mm.to 4mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet/air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

Construction of Granular Side Shoulders of specified thickness close graded materials conforming to clause 401 of MORTH specification and having soaked CBR Numbert less than 30 % granular layer compacted to t least 98% of maximum dry density as per IS 2720 (part 8) alos the remaining sepcification conforming to section 300 of MORTH (Murrum is Numbert allowed) constructed by Mix Place Method and grading etc completed as Directed by Engineer Inchrage

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. By Mechanical Means

Providing and fixing R.C.C. 200 metre stones as per I.R.C. standard including fixing in standard size C.C.1:4:8 block including curing, painting lettering etc. complete

Providing & fixing R.C.C. 1:2:4 ordinary km. stones including painting numbering etc. complete for N.H./ S.H./ M.D.R. etc. as per IRC design for highway km stone and fixing in standard size C.C. 1:4:8 block etc. complete

Providing and fixing Mandatory/Regulatory sign boards in circular shape of 900 mm dia made out of 4mm aluminum composite material ( ACM) sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity microprismatic grade sheetingHIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:672012 Table Number 8.3 supported on one Number. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity microprismatic grade sheetingHIP) shall have 7 years written warranty from the manufacturer & authorised distributor /convertor issued for field performance including the screen printed areas and cutout sheeting and cutout durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/ supplier.

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast interlocking cement concrete paving blocks 80 MM thick in M-40 grade of approved size and shape for City streets ,small/medium market roads, low volume roads, utility cuts on arterial roads etc. as specified and as per IS15658:2006 including cos to fallmaterials, manufacturing, curing, transportatio Number fblocks to works it eincluding loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of naturals and /crushed sand of 50mm thickness including necessary excavation in all stratas, spreading blindgeoffines and over the prepared bed, compacting blocks by plate vibrator etc. complete.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on BitumiNumberus Surface-Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250 gms per Square Metre area,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level,uniform and free from streaks and holes.complete.

Supplying and Fixing of Molded Shank Raised Pavement Markers/Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with microprismatic lens capable of providing total internal reflection o the lightentering the lens face and shall suppor ta load of 16000 kg tested in accordance to ASTMD4280 Type Hand complying to Specifications of Categ or A of MORTH Circular Number RW/NH/33023/10-97 DOIIIDt 11.06.1997.The height,width and length shall Numbert exceed 50mm,100mm and102+/-2mm and with minimum reflective area of 13Sqcm one ach side and thes lope to the bases hall be35+/-5degree.The strength of detachment of the integrated cylindrical shanks, (of diameter Numbert less than 19+/-2mm and height Numbert less than 30+/-2mm) from the body is to be a minimum value of 500Kg.Fixing will be by drilling holes on the road for the shanks to go inside,without nail sand using epoxy resin based adhesive as per manufacturer's recommendation and comple teas directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 1.5 mm aluminum sheet bonded with white retroreflective sheeting of ClassB (Type IV High intensity micro-prismatic grade sheeting-HIP)having pressure sensitive/heat activated adhesive retoreflective specified back ground,border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table Number8 .3S upported with back support frame 25mmx25mmx3mm, duly painted on back side with grey stovee namel paint and supported on one Number of M.S. angle iron post of size 65mmX65mmX6mm, 3.45m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cmX60cmX75cm including transportation etc; complete .ClassB( TypeIV High intensity micro-prismatic grade sheeting-HIP) shall have 7years written warranty from the manufacturer and authorised distributor /convert or issued for field performance including the screen printed areas and cut-outs heeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600 mmm ade out of 3 mm aluminum sheet bonded with white retroreflective sheeting of ClassB (TypeIVHigh intensity micro-prismatic grade sheeting-HIP)having pressure sensitive/heat activated adhesive retoreflective specified background,border and backside retoreflctive symbols ,letters,numerals,arrowasperIRC:67-2012 Table Number8 .3Supported with back support frame 25mmx25mmx3mm, duly painted on back side with grey stovee namel paint and supported on one Number of M.S .angle iron post of size 65mmX65mmX6mm, 3.45m long, duly painted with with flat oil paint having alternate black and white bands of 25cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cmX60cmX75 cm including transportation etc; complete. ClassB (TypeIVHigh intensity micro-prismatic grade sheeting-HIP) shall have 7years written warranty from the manufacturer and authorised distributor /convertorissued for field performance including the screen printedareas and cut-outs heeting and cut-out durable transparent overlay filmandthis warranty certificate in original should be submitted to the Engineer incharge by the contractor /supplier .

Providing and Laying of Rumble strips with Plastirib 2K, or equivalent 2component cold plastic profile dmaterial to give total width of 500mm and height of 10mm. Ramp provide give width of 145mm, width of ribs to be 55 mm laid at centre to centre distance of 35mm, with reflective glass beads @350gm/Square Metre .The finished surface to be levelled ,unifor mand free from streaksandholes ,tobe applied on the edge lines , including surface cleaning and cost of all materials etc. complete

Providind cutting bending hooking tying and laying in position TMT Fe 500 steel bar for reinforcement for all RCC work as per detail drawing etc completed. (Achalpur City)

Providind cutting bending hooking tying and laying in position TMT Fe 500 steel bar for reinforcement for all RCC work as per detail drawing etc completed. (Paratwada City)

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with R.C.C. M30 Grade concrete with HYSD reinforcement conforming to IRC: 21 and dowel bars 25 mmdia, 450mm long at expansion joints filled with pre -moulded asphalt filler board, key edto the structure on which it is built and installed as per design given in the enclosure to MOST circular Number.RW/NH-33022/1/94-DOIII dated 24 June 1994 as per dimension sin the approved drawing and at locations directed by the Engineer, all as specified etc. complete . Spec: MORT and H 2013 Cl 811 Page Number 360

Garden Work Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 Metric Tonr.)/ palm varieties upto height 1 to 2 Metric Tonrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 Metric Tonrs.

Supplying on site fresh Garden soil (i. e. 3 part soil ) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).Quantity of soil 0.141 Cubic Metre x 800/Cubic Metre = 112.80/-

Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m (consolidated thickness).Quantity of FYM 0.044 Cubic Metre x 950/Cubic Metre = 41.80/-

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 0.60 x 0.60 x 0.60m.

Flowering Trees Specification :- Minimum Girth 2 to 3 c.m. Minimum 4 to 5 Branches with Maximum number of Leaves,Plant should be Healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged 9- Nilmohar

Fixing and Transporting of self watering system tree guard-insertion of sapling in self watering tree guard and capping the bottom with expandable rubber seal. Supporting the bamboo with the help of cable tie. Bamboo to be buried 0.15 Metric Ton ht. below of excavated pit. Strengthening the bamboo in pit with adequate measures. Circulating the barbed wire around tree guard at middle ht. from bottom and fixing it. Thr rates excluding the cost of barbed wire, bamboo, expandable seal, tree guard and all other required material. Fixing to be carried out as per manual instruction

R.C.C Drain Work Dismantling the R.C.C.Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (Achalpur City)

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (Paratwada city)

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA (Achalpur City)

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA (Paratwada City)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork , cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete ,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade (Achalpur City)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork , cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete ,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade.( Paratwada City)

Transporting materials from the site to the site of deposition as directed. Transportation for 5 km ( STATE SSR ) Item Spec: ( PWD SSR 2022-23 ST C1). (ST C1, PgNumber 716) ( STATE DSR )

Providing and laying weep holes of 100 mm diameter AC/PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter (as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Bridge Work Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.upto all depth (By Mechnical Or Manual Means as per the requirement of work) By Mechnical Means

By Manual Means

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etc. complete. (Coarse Sand and Gravel ) (Achalpur City)

Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etc. complete. (Coarse Sand / Gravel/VSI Sand ) (Paratwada city)

Providing and laying in situ / ready mix / ready mix M 15 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) (Achalpur City)

Providing and laying in situ / ready mix / ready mix M 15 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) (Paratwada city)

Providing and laying in situ / ready mix controlled grade of M 30 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Natural sand / VSI sand finely washed etc ),, excluding reinforcement) (Achalpur City)

Providing and laying in situ / ready mix controlled grade of M 30 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Natural sand / VSI sand finely washed etc ),, excluding reinforcement) (Paratwada city)

Providing and laying in situ / ready mix M-30 controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) etc. complete. (excluding reinforcement) with reversible drum type mixer/ concrete batch mix plant (pan mixer) (Achalpur City)

Providing and laying in situ / ready mix M-30 controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) etc. complete. (excluding reinforcement) with reversible drum type mixer/ concrete batch mix plant (pan mixer) .(Paratwada city)

Prividing and fixing pressure relief pipes of 100 mm diametre of AC / PVC as per drawing for R.C.C Raft, galaries returns, abutments, wing wall etc complete.

Providing and laying in situ / ready mix M-30 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns/box cell walls including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with(Natural sand / VSI sand finely washed etc ) (A) Box Cell/Returns (Achalpur City)

(B) Kerb

Providing and laying in situ / ready mix M-30 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns/box cell walls including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with(Natural sand / VSI sand finely washed etc ) (A) Box Cell Walls .(Paratwada city)

(B) Cantilever Returns

(C) Ballast wall & Kerb

Providing and laying weep holes of 100 mm diameter AC/PVC pipes as per drawing for abutment returns, return walls etc. Complete

Providing and fixing bitumiNumberus pad 25mm thick for expansion joints in retaining wall, compound wall,bridge dirtwall etc. complete.

Providing expansion joints with 25mm thick bitumiNumberus pad as per detailed drawings etc. complete.

Providing and laying in situ / ready mix M30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural sand / VSI sand finely washed etc ) (Achalpur City)

Providing and laying in situ / ready mix M30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural sand / VSI sand finely washed etc ) (Paratwada city)

Providing and laying in situ / ready mix M 30 CC of trap/ granite/ quartzite / gneiss metal for wearing course of specified thickness including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (Achalpur City)

Providing and laying in situ / ready mix M 30 CC of trap/ granite/ quartzite/ gneiss metal for wearing course of specified thickness including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (Paratwada city)

Providing vent holes 100mm diameter GI pipe in the slab and wearing course with iron grill at the top and GI pipe at bottom as per drawing etc. complete.

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (Achalpur City)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (Paratwada)

Providing cast in situ / ready mix M15 grade cement concrete for head walls of CD work / retaining walls /Toe Walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural sand / VSI sand finely washed etc Sand, cement 6.60 bags/Cubic Metret) (Achalpur City)

Providing cast in situ / ready mix M15 grade cement concrete for head walls of CD work / retaining walls /Toe Walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural sand / VSI sand finely washed etc Sand, cement 6.60 bags/Cubic Metret) (Paratwada)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing Numbert less than 40 kg each complete as per drawings and Technical specifications etc. complete. (boulder laid without wire crates) (Achalpur City)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing Numbert less than 40 kg each complete as per drawings and Technical specifications etc. complete. (boulder laid without wire crates) (Paratwada)

Providing railing of mild steel angle post 2.0m center to center of section 75mm x 75mm x 10mm or equivalent I/C section of height 1.05 above bridge surface with minimum anchor length of 30cm including hold fast of 25mm diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30cm x 30cm x 30cm with three rows of 40mm B class GI pipe provided at 30cm on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etc. complete.

Providing RCC railing of cast in situ / ready mix RCC posts with M20 CC of trap/ granite/ quartzite/ gneiss metal for horizontal and vertical members as per detailed drawings including reinforcement, scaffolding, centering, formwork, compaction, finishing and curing with watering chemical compound etc. complete. (fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) (Achalpur City)

Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) (Paratwada)

Providing and laying 0.90 meter thick metal mat consisting of rubble, over size metal and Numberrmal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete. (Achalpur City)

Providing and laying 0.90 meter thick metal mat consisting of rubble, over size metal and Numberrmal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete. (Paratwada)

Providing dry rubble stone pitching 23 cm (about 9 ) thick including all material, quarry spalls, labour etc. complete.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Providing and applying two coat of water based cement paint to unplastered concrete surface after cleaning the surface of dirt ,dust ,oil, grease, efflorescence etc. complete .(applying 1 litre paint on 2 Square Metre)

Excavation for foundation by mechanical means in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. 1.50m to 3.00m lift, Add 10%

Excavation for foundation by mechanical means in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. 3.00m to 4.50m lift, Add 20%

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will Numbert be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and casting in situ / Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Work in foundations like raft, strip foundations, grillage and footings of R.C.C. Columns and steel stanchions etc. Columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. Complete. (Excluding reinforcement and structural steel ).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).With VSI standard Artificial Sand..

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying /pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc)

Providing and fixing bituminus pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete.

Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of Numbert less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. Complete.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. As directed by

Excavation for foundation in hard murum and boulders including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.

Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc.complete.

Providing and laying in situ M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer with natural sand / VSI standard Artificial Sand)

Providing and laying in situ / ready mix M-25 controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork , scaffolding, compaction by vibrating , finishing curing etc.complete. concrete batch mix plant / pan mixer with VSI standard Artificial Sand) etc. complete. (excluding reinforcement). A) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) .

Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including Scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) RCC work of Box Cell

Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications (VSI grade finely washed crushed sand )

Providing and laying in situ / ready mix controlled grade of M20 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications (VSI sand finely washed etc ), excluding reinforcement)

Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, caNumberpies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Electrical Work Pole Shifting

D.P Shifting

Water Line Shifting

N A CONSTRUCTION PVT. LTD.

Saket Infraprojects Ltd.