Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹40.6 L+₹65,626 (1.64%)Rejected-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹67.2 L+₹27.3 L (68.2%)Rejected-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-AOC Rejected |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
8 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
REPAIR/MAINT OF ROAD, BERMS, PAVED AREA IN AGE B/R-II UNDER GE BABINA
2023_MES_592404_1
CWE/JHA/BAB/TOKEN/18 OF 2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
BABINA
As per tender documents
9 documents required · 9 mandatory
₹1,000
GE BABINA
₹1.6 L
Yes
18 Jul 2023
29 Apr 2023
12 Jun 2023
29 Apr 2023
8 Jun 2023
22 May 2023
Amount
M&L for Scarifying or picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm and depth n.exc 100 mm deep and removing n.exc 50 mtr and stacking complete all as specified and directed.
M&L for 7.5 cm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 to 40mm) or Limestone, sand stone, Flint or Quartzite of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and directed.
All as per Ser item No 2.00 but except material. (Material obtained from Ser item No 1.00 shall be used)
M&L for preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.
M&L for applying evenly a tack coat of bitumnous primer at 10Kg per 10 Sqm using bitumen VG-10 complete all as specified and directed.
M&L for providing bituminous premix asphaltic semi dense concrete (40mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of mechanical pavers over primed WBM surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.
M&L for preparing old black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat @ 5 kg per 10 sq m with using paving bitumen VG-10 and M&L for providing bituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of mechanical pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
M&L for premix bituminous macadam laid / rolled and compacted by means of mechanical paver to required gradient and hcamber and (consolidated thickness 75mm or less) using 4% paving bitumen by weight or total mix complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 1.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads, pavements and speed breakers etc. with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
S&F in repair sand stone patties in edging of rough squared stone of size 50mm thick, 300mm depth and 60cm long each patties, length of stone patties shall be laid parallel to the road length, jointed struck flush including necessary excavation earthwork, returning filling and removal complete all as specified and directed. Note : The cost of taking down existing broken stone patties or brick deemed to be included in unit rate quoted by the tenderer.
S&F in repair Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.
S&F in repair speed bump, 50mm height made of strudy plastic high reistance precoloured (Black and yellow) bottom of bump studded with reflectors on either side complete all as specified and directed.
S&F in repair convex mirror 900mm dia made of polycarbonate reflective mirror outdoor use with hood and complete with mounting hardware as per manufacturers instruction for upto a height of 1500mm (above GL) with minimum grade MS pipe 50mm dia and all other complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and any decription and any position not otherwise specifically provided for and all as specified and directed.
M&L for machine pressed precast concept interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigment over 50mm thick sand bed over concrete surfaces complete all as specified and directed. Note : The item for 50mm sand bed measeured separately under respective items.
M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) in Sub floors, Sub base, floors and paving etc. complete all as specified and directed.
M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded store aggregate as in coping/surface channel /drains complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering to required camber and gradient complete all as specified and directed.
M/S A.R BUILDERS
M/S Ritu Tandon
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .