SITC of street lights for the SSPCC surrounding area at ACTREC

Amount

STREET LIGHTING Supply/replacement, testing & commissioning of external terminal box of size 200 x 250 x 150 mm made of 4 mm thick Cast Iron / PVC, neatly painted complete with front operable door with Allen key locking arrangement, arrangement for gland entry, water proof gasket, 4 Nos. of 8 mm dia. 40 mm long brass terminals on 150 x 30 x 10 mm bakelite strip, 16 A HRC fuse base & carrier with 6 A HRC fuse / 16A SP MCB, 16 A neutral link, nipple or sleeve of external dia. 38 mm which can be inserted in 38 mm dia. GI pipe, all as directed by O-I-C,ES. Equvilent arrangement can be done only after prior approval for make as well as other releted fixing/control gear arrangement. In case of replacement old/removed item shall be returned to E-I-C, ES. STREET LIGHT POLE ERECTION

7 Mtr. hot dip galvanised Octagonal street light pole with 1.5M long single arm bracket, suitable for 44 m/sec wind speed with suitable foundation bolts, bakelite with 1 no. 6A SP MCB and stud type terminal block/connector box of approved make suitable for terminating cable up to 4Cx16 sqmm size.

7 Mtr. hot dip galvanised Octagonal street light pole with hexagonal bracket suitable to mount integral flood light fixture & 1.5M double arm bracket suitable to mount two nos. of street light fixture. Suitable for 47 m/sec wind speed. (Fixtures can be mounted on the hexagonal bracket on six sides of the bracket but at max only 3 no. of integral flood lights can be mounted at a time.).with suitable foundation bolts, bakelite with 2 nos. 6A SP MCB and stud type terminal block/connector box of approved make suitable for terminating cable up to 4Cx16 sqmm size.

3 Mtr. hot dip galvanised Octagonal post top type pole having spigot on top of pole, suitable for 44 m/sec wind speed with foundation bolts, bakelite with 1 no. 6A SP MCB and stud type terminal block/connector box of approved make suitable for terminating cable up to 4Cx16 sqmm size.

Casting of new foundation for 7 Mtr. poles of above type inlcuding excavation of pole pit. The concrete mix for RCC foundation of Octagonal pole shall be M20. The scope shall also include grouting of foundation bolts including curing & provision of DWC HDPE pipe for passage the cable and finishing the surface.

Casting of new foundation for 3 Mtr. poles of above type inlcuding excavation of pole pit. The concrete mix for RCC foundation of Octagonal pole shall be M20. The scope shall also include grouting of foundation bolts including curing & provision of DWC HDPE pipe for passage the cable and finishing the surface.

LED street light fitting of following ratings having pressure die-cast aluminimum housing with Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint , suitable to following features. - Luminaires suitable with base plate and fitted on a existing site Pole. -In built electronic LED driver, -High Transmisivity diffuser>85%, -IP-65/67 -High Efficacy, -Provide Uniform low glare lighting , -CRI-70, -Warm White -Operating Temperature:--40 to +60 Celsius degree -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature-3000K.

90W, LED street light fitting, IP-67 outdoor type.

30W, LED Flood light fitting, IP-67 outdoor type

MV CABLE WORK Supply. Installation, testing & commissioning of 1.1 KV grade PVC insulated stranded/ round/ flat wire armoured Al conductor power cables ISI mark reputed make fixed on wall/ column/ ceiling or in shaft/ existing trench on 6 mm thick spacers/ angle support fixed with screws/ coach screws/ anchor fasteners, all other fixing accessories etc. as per instruction of Engg.-in-charge.

4 x 16 sq. mm Al conductor

3 x 2.5 sq. mm copper conductor cable

Supply, laying, testing & commissioning of LT cable through below ground through DWC pipe through out the campus as per requirment with all accessories and fixing arrangement all as per instructions & as directed by E-I-C, ES.

LT cable laying through DWC HDPE PIPE pipe

GI Earthing Strip Supplying & installation of tinned GI strip/ bare GI wire for earthing system fixed on wall/ side of the trench/ slab/ coloum/ beam along with clips/ saddle and spacers etc. including end connection with crimping type copper lugs complete in all respect, with continuty test etc & all as directed by Engg. -In-charge.

GI wire 8 SWG

Earthing rod for pole 1.5 mtr depth , 20mm Dia MS

Supplying & erecting crimping type copper lugs confirming to IS suitable for cables evenly crimped with high pressure tools & connected to switch gear terminals with brass/ cadmium plated nut bolts in an approved manners. all as directed by O-I-C, ES

16 Sqmm Aluminium Lug

s.s.Electricals (BID ID -3169821)

M/s Damani Enterprises (BID ID -3173903)

Ramesh Electrical and Mechanical Works (BID ID -3182407)

JAMES ELECTRICALS PRIVATE LIMITED (BID ID -3179149)

JOY THOMAS ENGINEERING PVT LTD (BID ID -3173674)

TECHNOFLUX ENGINEERS PRIVATE LIMITED (BID ID -3181493)