8564PROVISION OF CERTAIN WORK SERVICES AT CTI SECURTITY LIGHTS STABILIZER AND BUILDING WORKS AT JALAHALLI WEST OF GE M AF JALAHALLI BANGALORE

Amount

Sch A Part I (B&R ITEMS) (ItemNO 1 to 75) Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store

Supply and fixing for 15mm dia bore Tubes, ' Medium grade, galvanised, with all fitting; and fixed complete to walls and ceilings or laid in floors

Supply and fixing for 20mm dia bore Tubes, ' Medium grade, galvanised, with all fitting; and fixed complete to walls and ceilings or laid in floors

Supply and fixing 15mm dia Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for laying cable/pole foundation/stay assembly and getting out in soft/loose soil.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/Dense soil.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm all as specified.

Removal of excavated soil to a distance not exceeding 50M and depositing at a level not exceeding 1.5 meter above starting point all as specified.

Supply and fixing 110mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified.

Supply and fixing 75mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified.

Supply and fixing for PVC (SWR) bend 75 mm dia with access door

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100/110mm dia

Supply and fixing sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm .

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm and fittings with cement beadings and making good the disturbed surfaces all as directed.

Material and labour for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

Material and labour for concrete bed to PCC 1:3:6, type C2, using 40mm graded stone agg to drain pipes including packing under and haunching against sides of pipes after they are laid and tested of 100mm dia pipe

Material and labour for Cutting holes into or through Stone walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required Superficial area N exc 150 Sqcm

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6

Ditto all as per item No 21 above but vertical surfaces including 10 mm thick rendering with Cement mortar 1:4

Supply and fixing for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Supply and fixing Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, without any attachment .

Material and labour Preparation of new or previously treated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Material and labour for Cutting holes in brick walls in Cement mo rtar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. Exc. half brick but Exc. one brick.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames.

Taking down chowkhats or frame exc 1.5 sqm but not exceeding 4 sqm with shutter ( without taking off shutter from the frames)

Material and labor for Forming jambs using cement mortar 1:4, etc. to openings (to foregoing item), including cutting, tooting and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

Material and labour for pre-cast cement concrete1 :3 : 6 type C1 using 20mm graded stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting in mortar, built in cement mortar 1:4

Material and labour 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall

Material & labour for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying three coats of white wash on new surfaces

Demolition of brick/concrete walls built in cement mortar and removing the rubbish off the premises

Material and labour cutting holes into or through brick walls built in cement mortar and making good in Cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required supercial area exc 150 sq cm but n.exc 400sqcm

Material and labour for Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) built in CM 1:4

Material and labour TMT bars 10mm dia and over cut to length, bent to shape required, including spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour TMT bars 6 to 10mm dia and over cut to length, bent to shape required, including spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups

Material and labour providing cement concrete type B1 1:2:4 using 20 mm graded stone aggregates in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands including necessary form work..

Supply and fixing for Pressed steel frames for doors of size 125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

Material and labour for Glazed coloued Ceramic tiles of size 350 X 250 X 7mm or 450 X 350 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado and including 10 mm thick rendering in cement mortar 1:4 and prepare to receive tile finishes all as specified and directed

Material and labour for 30 mm thick flush shutters , solid core construction, with block board core and plywood face panels, on both sides of face is covered with decorative face veneer with lipping/frame to match

Supply and fixing for aluminium handle 125mm cast type anodised.

Supply and fixing for aluminium anodised, barrel tower bolt 150mm of extruded section.

Supply and fixing aluminium alloy anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section.

Material and labour for preparation of newly plastered surfaces and applying , one coat of alkali resistant primer and two coat of oil bound distemper all as specified and directed

Supply and fixing for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 6 sqcm and not exceeding 13 sqcm.

Material and labour for preparation of newly plastered wall surfaces and one coat of alkali resistant primer and applying two coat of Cement based Paint over a coat of primer all as specified and directed

Material and labour Preparing new wooden surface and applying two of Synthetic enamel Paint over a coat of pink primer all as specified and directed.

Material and labour for t wo coats of synthetic enamel paint over a coat of wooden primer on wooden surfaces not exc 10 cm width or girth incl preparation of new surfaces.

Supply and fixing Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and fixing powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws , aluminium tower bolt 2 Nos each door, one hydraulic door closer in each door and one sliding bolt 300 mm long aluminium etc. complete all as specified

Supply & fixing 5.5 mm Sheet glass, ordinary quality, glazing with beading in squares exc. 0.5 sq. m each pane and all as specified and directed by EIC.

Supply and fixing for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, goerning pivot made of brass, other parts made of mild steel heavy duty and fixed.

Supply and fixing for white plain PVC roller blind, window venition blinds vertical rolling

Material and labour Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.

Material and labour for pre-cast cement concrete1 :3 : 6 type C1 using 2mm graded stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting in mortar, built in cement mortar 1:6

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in copings, apex stones including weathering slightly rounded or chamfered angles and throating as directed

Material and labour for Hardcore of stone aggregate of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface

Material and labour for 75mm thick PCC 1:3:6 type C1 using 40mm graded stone aggregate as in plinth protection surface is to be finished even and fair without using extra cement

Supply and fixing for 2000 Ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fixing for 25mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Supply and fixing for 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supply and fixing for 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 455gms)

Supply and fixing sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including all fittings, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Supply and fixing WHB vitreous china oval type 630 x 450 mm with brackets fitted on wall including for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and wate pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms).

Supply and fixing 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm -90gms.

Supply and fixing waste coupling of PTMT (half or full threaded) 32mm in dia suitable for WHB.

Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 75 mm dia

Refixing old 15 mm dia GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

Refixing old 20 mm dia GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

Supply and fixing in rep PVC flexible Waste pipe 32mm dia

Material and labour PVC (SWR) floor trap, plain with grating including jointing with solvent cement of dia of outlet 75mm and all as specified and directed.

Sch A Part I (B&R ITEMS) (ItemNO 76 to 149) Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to storeMaterial and labour for Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 1.5 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and unsheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunken boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc including PVC insulated multi-stranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in Charge at site for Light point controlled by one piano type 5 amp switch Note - (i) Cost of cutting chasing and making good of disturbed surface all to match with existing surface deemed to quoted rates.(ii) Switch, socket and regulator to be measured and paid separately in respective items.

All as per item No 75 but for One Fan (Ceiling/Exhaust/Wall) point controlled by one piano type 5 amp switch and fan regulator complete all as specified

All as per Item No- 75 but for Socket combination outlet 2 in -1 3 pin, 5 amp flush type

All as per item No .75 here-in-before but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size (Switch, Socket shall be measured and paid separately).

Material and labour for switch piano flush type 6 Amps 240 volts single pole one way with PVC mooting box complete.

Material and labour for socket outlet 2 in 1 , 5 pin, 6 Amps 240 volts with PVC mounting box complete.

Material and labour for switch piano flush type 16 Amps, 240 volts one way.

Material and labour for Socket flush type 6/16 Amps, 2 in 1, 240 volts complete all as specified

Material and labour for ceiling rose surface Bakelite, 3 terminal complete all as specified & as directed.

Material and labour for sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Material and labour for VTPN distribution board, 415 volts , 50 Hz, 04 way with 200 Amps rated bus bar, vertical double door type, IP 43 suitable up to 160 Amps 4 pole MCCB as incoming and MCB SP as outgoings, fixed flush in wall and making good all disturbed surfaces in all respects and complete all as specified and directed. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make or equivalent approved make

Supply and fixing MCB SPN, 240 volts AC 50 Hz, 32 Amps all as directed. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Supply and fixing MCB TP, 415 volts AC 50 Hz, 63 Amps all as directed. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Supply and fixing MCB SP 240 volts, 10 KA, C-Series 6 to 32 Amps complete all as specified & as directed. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make or equivalent approved make Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Supply and fixing MCCB 63 Amp 16KA three pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Supply and fixing MCCB 100 Amp 16KA four pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete all as specified & as directed. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Supply and fixing MCCB 160 Amp 25 KA four pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Material and labour for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 2.5 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, one run of unsheathed copper conductor stranded 1100 volt grade cable of size 2.5 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green

Material and labour for concealed sub main wiring with 4 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sq mm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 32 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, including two runs of unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red/Yellow/Blue, Neutral-Black and Earth-Green

Supply and fixing LED luminaries 2'x2' (600 mm x 600 mm) 36 watt, 220 V AC Ceiling light with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing ,testing commissioning heavy duty Wall mounted air circulating turbo force fan of size 450 mm sweep,230 volts 50Hz,0.9 power factor ,1440 RPM motor speed , single phase,revesable rotation including suitable mounting bracket for fan complete all as specified and directed by Engr-in-charge. Note -1.Making hanging arrangement in wall of appropriate size to fix Bolts, giving suitable shape and making good the disturbed surface with cement mortar plastering in CM 1:3 and matching with existing surface etc are deemed to included in quoted rates.

Dismantling 100 KVA UPS with connected accessories (Metal enclosure ,industrial sockets battery Box with stand) , take in safe custody, Shifting (from T-941 to T-452 appx distance 500 Mtr) , re-installation at new OTES lab complete all as specified and directed. Note - Cost of shifting UPS 100 KVA with battery bachup,servicing and top up distilled water to battery and required additional small accessories for installations deemed to included in rates quoted rates of items.

Dismantling Web camera with all connected accessories ,take safe custody, Shifting (from T-941 to T- 452 appx distance 500 Mtr) and re-installation of Web camera and make functional ,testing complete all as specified and directed. Note- Cost of shifting of Web Cam with all connected accessories and required small accessories for making functional of WEB Cam etc deemed to included in rates quoted rates of items.

Dismantling cable raceway/protector ,take in safe custody , Shifting (from T-941 to T-452 appx distance 500 Mtr) and refixing in different location of Cable trunking raceway of any size with fixing bracket edge plate extenrior angle cable outlet ,junction box side cover for junction box including cutting chasing of exiting flooring in suitable size of cable raceway trunking and making good as per existing floor surfaces. Note - Cost of shifting of cable raceway trunking , cutting, chasing and required additional small accessories etc deemed to included in rates quoted rates of items.

Material and labour for Cable raceway/protector straight solid of size 1000 x 130 x 20 mm load up 200kg single channel size: 10 x 40 mm Cable Bridge one straight with one channel, solid rubber. Extendable without limitation very stable and slip-proof when used on uneven or smooth surfaces features Integrated Connector with connected accessories complete all as specified and directed: Make: HENSEL/LEGREND/SCHNIDER. Note - Cost of cutting, chasing and required additional small accessories etc deemed to included in rates quoted rates of items.

Material and labour for Cable Junction Box, Dimension 130 x 180 x 77 MM, Suitable for 10 Sq.mm cable , Degree of Protection: IP 66, Degree of protection against mechanical load : IK07, material: polypropylene, Insulated and shock proof, Dust proof & Water tight, Anti – Corrosive, flame-retardant, self-extinguishing and external brackets for wall/floor fixing included with all connected items complete all as specified. Make: HENSEL/Hager/Schnider or equivalent approved make

Material and labour for Cable Junction Box, Dimension 88 x 88 x 47 MM Suitable for 1.5/2.5 Sq.mm cable , Degree of Protection: IP 66, Degree of protection against mechanical load : IK07, material: polypropylene, Insulated and shock proof, Dust proof & Water tight, Anti – Corrosive, flame-retardant, self-extinguishing and external brackets for wall/floor fixing included with all connected items complete all as specified. Make: HENSEL/Hager/Schnider or equivalent approved make

Material and labour for providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4 mm dia GI wire by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 15 mm bore GI pipe (light grade) for protection of earth lead etc. complete all as specified and directed.

Supply, installation and testing commissioning the hi wall split unit AC indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma for better air quality minimum 5 star rating and EER 3.2 of capacity 2.00 TR complete with heavy duty Air Conditioner Outdoor Unit Mounting Bracket suitable up to 160kg complete all as specified and directed. Make - Panasonic/Lyord/ Hitachi, or equivalent approved make. Note- AC having the common features like provide Inverter compressor, Active Carbon Filter ,Twin Rotary Inverter Technology,Anti Bacterial & Dust Filter, Anti-Microbial Self Cleaning (Healthy Auto Blow),R32 refrigerant, silent operation, Refrigerant gas R32 that is environmental friendly with no ozone depletion potential,100 % Percent copper condenser coil for better cooling and low maintenance, the included components are 1 Indoor Unit,1 Outdoor Unit, Remote Control, User manual, Warranty Card, Connecting Pipes etc and the quoted rates deemed to included for above features .

Supply and Install Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & deigned for input variation between 170 V to 250V with output voltage stabilizer at accuracy of +- 2.5% suitable for 2 Ton AC or (up to 15 Amp Load) Make-V Guard/ Voltas/ Microtek, or equivalent approved make the Stabilizer should having features like Low and High Voltage Cut-off Protection, Intelligent Time Delay System, Latest IC Technology: Assures Reliable Protection, Wall Mounting Cabinet Design: Elegant and Easy to Install, Built In Thermal Overload Protection: Protects the Stabilizer and Compressors During High Temperature Burnout all as specified etc deemed to and the quoted rates deemed to included for above features .

Material and labour for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, one run of unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green

Dismantling the Split AC of capacity 2.0 TR with connected accessories (Mounting bracket ,industrial sockets and stabilizers) , take in safe custody, Shifting (from T-941 to T-452 appx distance 500 Mtr) ,re-installation at new OTES lab, recharge of AC with R32 as per required quantity complete all as specified and directed. Note - Cost of shifting Split AC of capacity 2.0TR with accessories servicing and recharge of Gas R32 and required additional small accessories like cooling pipe joints with thermal insulation for re-installations etc deemed to included in rates quoted rates of items.

Material and labour for Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 4 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and unsheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunken boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc including PVC insulated multi-stranded copper conductor 4 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete. Note - (i) Cost of cutting chasing and making good of disturbed surface all to match with existing etc deemed to included in rates quoted rates of items.

Supply and fixing of Sheet metal enclosure with socket plug top and MCB SPN 20 Amp flush mounting enclosure with 2 Pin and earth plug socket all as specified and directed. Make : Legrand/ Schneider/Indo Asian (Optipro) or equivalent approved make

Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is than gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness only will be considered for payment.

Material and labour for well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench complete all as specified.

Material and labour for cutting of bituminous road/ hard standing/PCC path/wall up to a size not exceeding 20 cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate up to existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface complete all as specified.

Supply and fixing in replacement of GI tubing light grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as specified and directed.

Supply and laying XLPE insulated heavy duty electric cable of size 240 Sq mm 3.5 core with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC grade armored with galvanised steel wire or grade and overall sheaths laying in trenches/cable ducts, fixed to wall/pole complete all as specified. Make - Havells cables /Polycab cable / KEI cable or equivalent approved make

Supply and laying XLPE insulated heavy duty electric cable of size 150 Sq mm 3.5 core with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC grade armoured with galvanised steel wire or tape and overall sheaths laying in trenches/cable ducts, fixed to wall/pole complete all as specified Make - Havells cable /polycab cable / KEI cable or equivalent approved make

Supply and laying XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall sheather of size 70 Sqmm 3 ½ core and laying in trenches/cable ducts, fixed to wall/pole complete all as specified and directed. Make - Havells cables /Polycab cable / KEI cable or equivalent approved make

Supply and laying XLPE insulated heavy duty electric cable of size 16 Sq mm 4 core with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheaths laying in trenches/cable ducts, fixed to wall/pole complete all as specified Make - Havells cables /Polycab cable / KEI cable or equivalent approved make

Supply and laying XLPE insulated heavy duty electric cable of size 6 Sq mm 4 core with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC armoured with galvanised steel wire and overall sheathed laying in trenches/cable ducts, fixed to wall/pole complete all as specified Make - Havells cables /Polycab cable / KEI cable or equivalent approved make

Material and labour for providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4 mm dia GI wire by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 20 mm bore GI pipe (light grade) for protection of earth lead etc.

Supply and fixing ,testing commissioning heavy duty Exhaust fan of size 300 mm sweep, 6 pole, 900 rpm +-5%,230 volts 50 Hz,0.9 power factor ,single phase, four blade, mounting on ms sheet frame Motor insulation class - E with MS shaft comply with (1.70 to 2 mfd) capacitor mounted on fan motor back over suitable clamp and body finishing with grey supper enameled with primer coat including MS frame with flexible rubber pad for reduce of motor vibrations and provide eclectic connection ceiling rose to fan using three core copper cable of 1.00 sq mm drawn through pvc flexible pipe 15 mm dia complete all as specified .Note - Making hole in any type wall stone masonry of appropriate size to fix the exhaust fan 300 mm to be paid separately in respective items. Make- CG/Bajaj/Phillips or equivalent approved make

Material and labour for making of hole in stone masonry wall of appropriate size to fix the exhaust fan 300 mm and grouting of Bolts, giving suitable shape and making good the disturbed surface with cement mortar plastering in CM 1:3 and matching with existing surface complete all as specified.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including street light fitting bracket made out of 40 mm bore GI pipe, light grade, tubing bend to shape, 1.2 meter long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 40 x 6 mm with bolts, nuts and washers and clamps made out of 40x6 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer complete. complete, all as specified and directed. Make- CG/Bajaj/Phillips or equivalent approved make

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Protection complete including street light fitting bracket made out of 40 mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 40 x 6 mm with bolts, nuts and washers and clamps made out of 40x6 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer complete. complete .Make- CG/Bajaj/Phillips CG/Bajaj/Phillips or equivalent approved make

Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including street light fitting bracket made out of 40 mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 40 x 6 mm with bolts, nuts and washers and clamps made out of 40x6 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer complete. complete, all as specified and directed. Make- CG/Bajaj/Phillips CG/Bajaj/Phillips or equivalent approved make

Material and labourv for Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. to be fixed on pole with all fittings including mouth pieces for passing of sub main wiring three core of copper wire 2.5 sqmm to provide with conduit and connection to LED light and control box complete all as directed.

Supply & Erecting in repairs Mild steel tubular swaged pole 9.0 meter long 410, SP-31 complete with cast iron base plate, bracket, final taper plug, bolt, nuts & screws and painted on both side (internally & externally), external surface painted with two coat of aluminum paint over coat of primer and painting with black up to 1.5 meter from top of PCC coping white colour paint as in strips of equal width with marking pole numbers by using one coat of synthetic enamel paint including necessary PCC foundation and coping as per TD drawing complete all as specified and as directed.

Supply & Erecting in repairs Mild steel tubular swaged pole 8.5 meter long 410, SP-31 complete with cast iron base plate, bracket, final taper plug, bolt, nuts & screws and painted on both side (internally & externally), external surface painted with two coat of aluminum paint over coat of primer and painting with black up to 1.5 meter from top of PCC coping white colour paint as in strips of equal width with marking pole numbers by using one coat of synthetic enamel paint including necessary PCC foundation and coping as per TD drawing complete all as specified and as directed.

Supplying & fixing of terminal panel box of size 200mmx160mmx98mm of outdoor pole mounted front operated cubical type Box as per IEC 60439-1 (IS:8623) & IEC 60439 -2 dead back, free standing, dust and vermin proof, switchboard with IP 66 protection with suitable for use 440 volts, 3 phase 4 wire 50 Hz system. The Board/Panel shall be made out of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES. The gasket material shall be Polyurethane; while the gasket shall be internally embedded.(Make - Hensel/Hager/Schneider/ or equivalent approved make), The manufacturer of board/panel shall submit a copy of test report in accordance with IEC60529. The Panel Should be assembled at manufactures factory and Panel box having 6 Amp MCB (Make -Indo Asian/Havells/Legrand), 25 Sq.mm Terminal Block (04 Nos) , 6 Sq.mm Disconnected Terminal (01 No) ,4 Sq.mm Earth Terminal (01 No) including MS clamp in suitable size with nut bolts Complete all as directed.

Material and labour in repairs Cable PVC insulated PVC unsheathed un-armoured copper conductor (multi stranded) of cross sectional area 1.5 sq mm 3 core drawing in PVC conduit/Steel tubular pole all as required for connections to light fittings complete all as directed. Make- Havells/Polycab/Anchor/or equivalent approved make

Material and labour for Renewal of earthing complete with copper earth plate electrode of size 60 cm X 60 cm X 3.15 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to copper strip 20x3.15 mm by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.3 of SSR Pt-I, connected to earthing main Panel/Eqmt including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 32 mm bore GI pipe (light grade) for protection of earth lead and test point terminal block made of bronze of size 75x75x25 mm drilled and screwed including 03 Nos 8 mm 25 mm long Hex head screw etc. complete all as specified.

Material and labourfor Copper strip 20 x 3.15mm with connection to earth for grid provide under ground/ above ground of earthing and test point etc conductors and down conductors above ground.

Material and labour for providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 32 x 6 mm galvanized MS strip by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 40 mm bore GI pipe (light grade) for protection of earth lead test point terminal block made of bronze of size 75x75x25 mm drilled and screwed including 03 Nos 8 mm 25 mm long Hex head screw etc complete all as specified and directed.

Material and labour for earth continuity conductor of size 32 x 6 mm copper strip fixed on walls / buried in ground with and including fixing arrangements on walls like porcelain insulators screws washers etc complete.

Supply and fixing MCCB 400 Amp with rupturing capacity 36 KA ,4 pole , 415 Volts, 50 Hz thermal magnetic release, fixed type complete with enclosure frame for MCCB mounted on frame made of equal angle iron of size 40x40x6 mm, making all fixing arrangement and grouting in PCC foundation of 1:3:6 type B1 complete all as specified and directed. Make : Legrand/ Schneider/Indo Asian or equivalent approved make. Note :- (1) Spreader Links 1 set (4 Nos links) in suitable size/ capacity for MCCB 400A and Cables and lugs to be provided as per suitable as per size of sheet enclosure shall be includes in items rates. 2. Cost of Items extra accessories for fixing of MCCB shall be includes in items rates. (3) Rates of lugs and glands for incoming and out going of LT UG cable shall be includes in items rates.

Supply and fix on load change over switch of capacity 200 Amps, 4 pole , 415V in sheet metal enclosure conforming to IEC 60947-3 ,door interlocking , suitable for vertical/horizontal with mounting on frame made of equal angle iron of size 40 x 40 x 6 mm, making all fixing arrangement and grouting in PCC foundation of 1:3:6 type B1 with following accessories complete all as specified and as directed. Make : Legrand/ L&T/Indo Asian/ Make : Legrand/ Schneider/Indo Asian or equivalent approved make. . (i) Extra Spreader Links for frame to be provided as per suitable size of change over switch enclosure - 1 set (4 Nos links). (ii) Extra Auxiliary Switch 200A (1NO + 1NC) suitable for change over switch - 1 set (4 Nos links) Note :- 1. Cost of Items are required for fixing and extra accessories of change over switch shall be includes in items rates.

Material and labour for Surface excavation in Hard/dence soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

Material and labour for Hardcore with broken stone or boulders of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

Material and labour for Plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in foundation all as specified and as directed.

Material and labour for Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in foundation, plinth courses, string courses, lacing courses, parapets with fair surface complete all as specified.

Material and labour for bricks works with sub class B bricks with straight or curved on plan built in 1:4 cement mortar specified and directed.

Material and labour for 15 mm thick rendering/plastering on fair faces of bricks surfaces or concrete surface in CM 1:4 and finishing even and smooth complete and directed.

Material and labour for steel work in tubular pole, truss/rafter/purlins including nut bolt washers, screw complete using ERW or induction but welded tubes conforming to IS 1161,1979 grade St-240 complete as as specified.

Material and labour for pre painted galvalume aliminium zinc coating GI based corrugated steel sheet 0.50mm thick of san having tensile strength of 550 Mpa as in roof covering cladding to entire structure of shed fix with self taping screws and provide anti leaking arrangement complete all as specified and directed.

Supply and fixing of GI tubing light grade of size 80 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as specified and directed.

Supply, install, testing and commissioning of Isolation transformer 10KVA single phase input and single phase out put 230Volt, 50Hz., ratio 1:1air cooled , electrostatic shielding & grounding, reduce power line noise , total isolation from input and output, copper metal Shielding material with all protection complete all as specified and as directed by Engr-in-Charge. Make : Power-One or equivalent approved make.

Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including galvanised earth strip of size 25x4 mm (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth strip by means of bolts, nuts, check nuts and washers made out of galvanised iron and connected to earth test point as shown in electrical plate No. 3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20mm bore medium grade, wire nuts and lugs complete all as specified and directed.

devan enterprises

Shanthi Construction